11-26-2020, 04:34 PM | #1 |
Drives: Camaro Join Date: Sep 2020
Location: Easton, PA
Posts: 117
|
Camaro door pad question?
Hi guys, I recently had a unnamed friend in my car and he scratched the top leather pad on the door pretty bad. For reference it is the larger one that goes up over the door and almost to the window itself. I am wondering if anybody knows if that individual piece is replaceable and if it is what is the part number for it? I didn't really like the factory black ones anyways so maybe some aftermarket company makes cooler ones im not sure, but I am looking to replace it so any suggestions would be appreciated!!
|
11-26-2020, 07:27 PM | #2 |
Drives: 2019 Camaro SS M6 Join Date: Jan 2020
Location: Nebraska
Posts: 181
|
I don't believe that is a replaceable piece. Think you would have to buy a whole new door panel. You could also go to an upholsterer and see if they could fix it. Probably be cheaper that way.
Last edited by Jb54; 11-26-2020 at 07:28 PM. Reason: a |
11-27-2020, 07:21 AM | #3 |
Drives: 08 Tiburon GS, 2018 Camaro 2.0T Join Date: Sep 2017
Location: Québec
Posts: 1,660
|
Can't be replaced unless you remove the door panel and undo the plastic welds which is a PITA.
Reupholstering it would require the same work. Get a new door panel it might be cheaper.
__________________
2018 Camaro LS | 6 spd | 2.0L turbo | Nightfall Grey | RS package | Technology Package.
--------------------- Order WDGHKX 1100 - 5/08/2018 | 3800 - 6/18/2018 2000 - 5/09/2018 | 4200 - 6/21/2018 3000 - 5/28/2018 | 5000 - 6/27/2018 6000 - 6/29/2018 |
11-27-2020, 12:37 PM | #4 |
Account Suspended
Drives: Fast if no one's looking Join Date: Aug 2019
Location: Cleveland, Ohio
Posts: 1,794
|
The door card is only available as one complete assembly as seen below. It would be between $230 and $360 depending on what options you have and your color.
https://www.gmpartsdirect.com/v-2019...rim-front-door |
11-27-2020, 07:03 PM | #5 |
Drives: 2017 Camaro SS Fifty Join Date: Oct 2016
Location: Port St Lucie, Florida
Posts: 966
|
I had a bottom panel redone in my C5 which required melting out the plastic welds and rewelding. Only cost me $100 each door card. So it may be less expensive to have a auto upholster redo it. The only issue may be getting it to match the other door card.
|
|
|
Post Reply
|
|
|