Harness bar installed - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

ZL1-V · 03-04-2016, 02:48 PM

Thanks to PMR in Rancho Cucamonga. I am now able to wear my helmet in a sunroof equipped car with comfort.

KaBoom1701 · 03-04-2016, 04:35 PM

Looks good.

Looking for a good alignment shop. Can PMR do this?

Thx

ZL1-V · 03-04-2016, 04:54 PM

Quote:

Originally Posted by KaBoom1701

Looks good.

Looking for a good alignment shop. Can PMR do this?

Thx

I am not sure. There were cars all over the shop. I don't remember seeing their alignment rack. It probably had a car on it. My local alignment shop has been okay so far. I am searching for a shop that is familiar with the Camaro and track days or races a car on a road course when it comes to alignments. Let me know what you find.

KaBoom1701 · 03-05-2016, 07:38 AM

Quote:

Originally Posted by ZL1-V

I am not sure. There were cars all over the shop. I don't remember seeing their alignment rack. It probably had a car on it. My local alignment shop has been okay so far. I am searching for a shop that is familiar with the Camaro and track days or races a car on a road course when it comes to alignments. Let me know what you find.

I'm in the same boat.

Thanks for the info.

NW Sam · 03-05-2016, 03:16 PM

Looks great. I don't fit with a helmet either. Did they install the seats on adjustable sliders?

yoshie · 03-05-2016, 07:49 PM

I'm 6' also sunroof and helmet problem are the seats bolted to floor or on sliders

ZL1-V · 03-05-2016, 08:41 PM

Quote:

Originally Posted by NW Sam

Looks great. I don't fit with a helmet either. Did they install the seats on adjustable sliders?

No sliders installed, that was an option I was asked that when the project started but would add height. We did a test fit and they fixed the seat into position. The side brackets bolt directly to the custom mounts welded to the floor. I feel secure as the seat doesn't move under heavy loads. I adjusted the six point harness yesterday. Feels good now, especially with a sub belt.

locktyght · 03-31-2016, 08:37 AM

Quote:

Originally Posted by ZL1-V

No sliders installed, that was an option I was asked that when the project started but would add height. We did a test fit and they fixed the seat into position. The side brackets bolt directly to the custom mounts welded to the floor. I feel secure as the seat doesn't move under heavy loads. I adjusted the six point harness yesterday. Feels good now, especially with a sub belt.

Do you happen to have any photos of the custom mounts? Also which side brackets were used?

ZL1-V · 03-31-2016, 10:17 AM

Quote:

Originally Posted by locktyght

Do you happen to have any photos of the custom mounts? Also which side brackets were used?

No photos to post to show the detail involved. They are covered up with the carpet on the floor. The Cobra brackets were reused and attached to the floor mounts.. The other option was to fabricate a set if needed, but that fortunately was not necessary. These guys do a lot of custom work. I actually found out they install the D3 Cadillac customers requests for roll cages. I'm impressed to say the least.

03-04-2016, 02:48 PM	#1
ZL1-V Drives: 2013 Camaro ZL1 Join Date: Dec 2012 Location: Dallas, Texas Posts: 2,155	Harness bar installed Thanks to PMR in Rancho Cucamonga. I am now able to wear my helmet in a sunroof equipped car with comfort. Attached Images

03-04-2016, 04:35 PM	#2
KaBoom1701 KaBoom1701 Drives: 13' ZL1 Red M6 Join Date: Dec 2012 Location: I.E. SoCal (Yucaipa) Posts: 8,630	Looks good. Looking for a good alignment shop. Can PMR do this? Thx __________________ Mods: Roto-Fab Intake, WW Res. kit & Big Gulp Air Scoop, Elite Catch Can, ATI Super Damper & 18% OD Pulley, LF Idler pulley bracket, Metco CC breather, ID850 Injectors, Stainless Power Headers w/ ceramic coating, TR71X Spark Plugs, JMS Fuel Pump Booster, Bo White TB, Tuned by Ted @ Jannetty Racing, Ron Davis HX, D3 Reservoir, Pfadt 1" Springs, Moreno Camber Plates, ZL1 Addons Splitter guard washers, Tow Hook kit & rock guards, Hurst Shifter Billet Plus 6 Speed Short Shifter, ZL1 DRL lighting harness, ZL1 Recaro Seats.

03-05-2016, 03:16 PM	#5
NW Sam Drives: 2017 ZL1 Garnet Red Join Date: Feb 2015 Location: NW Wa Posts: 354	Looks great. I don't fit with a helmet either. Did they install the seats on adjustable sliders?

03-05-2016, 07:49 PM	#6
yoshie Drives: ZL1, ,GMC Z71 ,TJ Join Date: Oct 2011 Location: So Cal Posts: 120	I'm 6' also sunroof and helmet problem are the seats bolted to floor or on sliders