08-11-2017, 10:55 AM | #1 |
Drives: Mosaic Black ZL1 M6 Join Date: Jun 2017
Location: SOUTHERN CALIFORNIA
Posts: 118
|
Any Lowered Zl1's out there
Looking to clean the wheel gap in front. Anyone running BMR, or Phastek? Seems that Eibach still shows more gap in front than rear.
|
08-11-2017, 10:58 AM | #2 |
Drives: 2017 Mosaic Black ZL1, 6 spd, PDR Join Date: Jul 2017
Location: Charleston, SC
Posts: 55
|
I'm installing Phastek springs on my '17 ZL1 when I get back. They seem to give the car a great stance.
|
08-11-2017, 11:18 AM | #3 |
Drives: 17 NFG ZL1 17 GTR 22 RS6 Join Date: Apr 2017
Location: Upper Marlboro MD
Posts: 625
|
|
08-11-2017, 11:26 AM | #4 |
Drives: No Camaro :( Join Date: Apr 2013
Location: Chitown Burbs
Posts: 1,136
|
AzCharlie put some springs in a few weeks back and posted. There is also a recent post in the past 24 hours here about possible replacement springs for the ZL1 built before a specific date. I looked at your original post when you purchased your ZL1 and it appears to me to have a large gap in the front compared to other ZL1's, maybe it's just my eyes but worth looking into before buying springs.
|
08-11-2017, 11:30 AM | #5 |
Drives: Mosaic Black ZL1 M6 Join Date: Jun 2017
Location: SOUTHERN CALIFORNIA
Posts: 118
|
That would be great man. Thanks
|
08-11-2017, 11:30 AM | #6 |
Drives: Mosaic Black ZL1 M6 Join Date: Jun 2017
Location: SOUTHERN CALIFORNIA
Posts: 118
|
Yeah the gap is pretty significant and annoying. I did read the post about GM putting updated Springs on the 18'. Not too sure if they will swap them out though.
|
08-11-2017, 02:45 PM | #7 |
Drives: 2017 Mosaic Black ZL1, 6 spd, PDR Join Date: Jul 2017
Location: Charleston, SC
Posts: 55
|
Google "lowered 2017 ZL1" and you'll find a picture of one done with Phastek springs. It only drops the ZL1 by 1.25", but it doesn't look slammed by any means in the pictures.
|
08-11-2017, 02:56 PM | #8 |
Drives: 2017 Mosaic Black ZL1, 6 spd, PDR Join Date: Jul 2017
Location: Charleston, SC
Posts: 55
|
Google "lowered 2017 ZL1" and you'll find a picture of one done with Phastek springs. It only drops the ZL1 by 1.25", but it doesn't look slammed by any means in the pictures.
|
08-11-2017, 04:02 PM | #9 | |
Drives: N/A Join Date: Jan 2016
Location: Houston
Posts: 167
|
Quote:
Part #84312736, 84312735 https://www.gmpartsdirect.com/oem-pa...pring-84312736
__________________
Modded 99 Z28 - Gone
|
|
08-11-2017, 04:55 PM | #11 |
Drives: Mosaic Black ZL1 M6 Join Date: Jun 2017
Location: SOUTHERN CALIFORNIA
Posts: 118
|
Any other shots Ricardo? I know the wheel is turned so makes the left rear raise a bit.
|
08-11-2017, 05:48 PM | #12 |
Drives: 2015 Charger SRT Hellcat(732rwhp) Join Date: Mar 2017
Location: Los Angeles, CA
Posts: 123
|
I was also looking at doing this....are people also doing sway bars or strut tower braces?
__________________
Rides-
2015 Hellcat Charger-732rwhp/708rwtq 2017 ZL1 6M- Rotofab CAI, Katech ported Tbody |
08-11-2017, 07:23 PM | #13 |
@fast4vavlezl1@lt4_nation
Drives: 2018 ZL1 1LE Join Date: Dec 2016
Location: SoCal
Posts: 93
|
Any Lowered Zl1's out there
I've been lowered on Eibach prokit since February.
Very happy with the stance!! Rides great with no effect to the MR Sent from my iPhone using Tapatalk Last edited by fast4valve; 08-11-2017 at 08:15 PM. |
08-11-2017, 09:42 PM | #14 |
Drives: 2017 ZL1 Join Date: Dec 2009
Location: NYC
Posts: 1,165
|
Dropped mine on kw v3 coilovers and love it. Ride is better than the mrc in my opinion. I havent had time to do the final adjustments yet, im waiting on my wheels.
__________________
Elite Design Concepts NY5THGEN2017 ZL1 Garnet Red/M6/// IG @Crazl1
|
|
|
Post Reply
|
|
|