08-10-2020, 09:59 PM | #43 | ||
Account Suspended
Drives: 2017 Camaro ZL1 A10 Join Date: May 2012
Location: NJ
Posts: 7,692
|
Quote:
Quote:
Plans for my cars and bikes over the next few weeks include air filter, slip on, dyno tune for the H2-SX...air filter, slip on (if not a full system), and dyno tune for the Busa...rear tires (at least), possible blower porting, and possible catback for the HC...dyno tune, intake, catback for the X5...and then I gotta start saving up to do some extensive mods on the ZL1. Again I am considering the JMS STage IV setup. But some people have been pointing me towards a simple blower porting, LT, pulley, and dyno tune. If I can get away with that and not have issues with excessive heat then I might just go that route. Hopefully everything will be done before Summer 2021!! |
||
08-11-2020, 12:29 PM | #44 | |
Drives: 21 Bronco Join Date: Jun 2012
Location: Carol Stream
Posts: 6,024
|
Quote:
|
|
09-03-2020, 09:35 PM | #45 |
Account Suspended
Drives: 2017 Camaro ZL1 A10 Join Date: May 2012
Location: NJ
Posts: 7,692
|
Most cars feel slow to me now anyway since I DD my Hellcat and ZL1. The only time I drive the X5 is when it snows. My ZL1 despite having "only" 650 HP still feels fast but that is due to how well it was built. That is probably about the "slowest" I can tolerate these days. I'm kinda glad I cancelled my C8 purchase because in hindsight it would not have been enough for me. I doubt the C8 Z06 will do it for me either. So after I mod the ZL1 I think my next car will have to be something even further beyond...like a McLaren.
|
09-03-2020, 09:36 PM | #46 |
Account Suspended
Drives: 2017 Camaro ZL1 A10 Join Date: May 2012
Location: NJ
Posts: 7,692
|
I got a quote for some mods to the ZL1 so I gotta start saving up. I'm hoping to get the work done in the Spring. As of right now I'm looking at head work, cam, Whipple, etc to the tune of 800-ish RWHP on 93 octane.
|
09-04-2020, 09:49 AM | #47 | |
Drives: 21 Bronco Join Date: Jun 2012
Location: Carol Stream
Posts: 6,024
|
Quote:
I am sure the C8 Z06 will be a monster but I don't think it will have that brute force acceleration like your current rides. |
|
09-05-2020, 07:36 AM | #48 |
Drives: E92 BMW M3 Join Date: Oct 2012
Location: Houston
Posts: 4,496
|
Congrats on getting the HC back, I am very interested in seeing you H/C/I build for the ZL1. That would be the ultimate car IMO. A Cammed ZL1 and I have all I need.
__________________
SOLD - 2013 1LE - Pat G Spec'd Cam, NPP with 1 7/8" Long Tube Headers with High Flow Cats, Intake w/scoop, Ported Throttle Body, and Apex 1.25" Lowering Springs.
J-Rod Built and Matt@FSP Tuned |
09-30-2020, 08:42 PM | #49 | |
Account Suspended
Drives: 2017 Camaro ZL1 A10 Join Date: May 2012
Location: NJ
Posts: 7,692
|
Quote:
Thanks. Yea I've been emailing JMS these past couple weeks but now I think it is about time I go ahead and bear down and bite the bullet. I'm gonna getting it ready to do the mods and hopefully it'll be ready to ship down there around this time next year. I'm thinking I'll see a bit more than what the Hellcat has. I'm gunning for 800+ to the wheels on 93 octane. |
|
10-12-2020, 09:51 AM | #50 |
Account Suspended
Drives: 2017 Camaro ZL1 A10 Join Date: May 2012
Location: NJ
Posts: 7,692
|
And the bullet has been bit. I put the deposit down so it's a set deal!! Hopefully I'll have the work done in about 8 months!!!
|
10-12-2020, 09:55 AM | #51 |
Drives: E92 BMW M3 Join Date: Oct 2012
Location: Houston
Posts: 4,496
|
__________________
SOLD - 2013 1LE - Pat G Spec'd Cam, NPP with 1 7/8" Long Tube Headers with High Flow Cats, Intake w/scoop, Ported Throttle Body, and Apex 1.25" Lowering Springs.
J-Rod Built and Matt@FSP Tuned |
10-12-2020, 05:27 PM | #52 |
Account Suspended
Drives: 2017 Camaro ZL1 A10 Join Date: May 2012
Location: NJ
Posts: 7,692
|
LOL, I'm paying it off in installments. And I'm trying to just take my time and pay it off slowly. But each day that passes, the urge to just pay it all off immediately and ship it down there gets stronger and stronger. The good thing about it is that the parts are on back order. So I'll have to wait either way. But Lord help me, if they email me and tell me they have the parts ready, then I might just go ahead and ship it!!
|
10-15-2020, 08:30 PM | #53 |
Account Suspended
Drives: 2017 Camaro ZL1 A10 Join Date: May 2012
Location: NJ
Posts: 7,692
|
So since some of the parts are on back order, I asked JMS to update me when they become available. I plan to go ahead and pay it off as soon as the parts are available. It is better to do that than to pay it off in a year and end up having to wait a few extra months. So that is where I'm at right now. Hopefully the parts will be available in the next few months and I'll go ahead and pay it all off.
In the meantime I contacted HHP about doing a second upgrade to the Hellcat. It seems that 766 RWHP just is not enough. So I might be stepping up to their stage 2 package. It adds in a lower pulley and 2 different upper pulleys (along with a few other items). The low boost setup will have me right around where I'm at right now. The high boost setup will require race gas and should be in the 950+ RWHP range. Maybe even over 1000. So we'll see how that plays in with my current plans. If all goes well, then by this time next year I'll have an 850-ish RWHP ZL1, a 950-ish RWHP Hellcat, my H2-SX will be around 220-ish WHP, and my Busa will be close to 200 WHP. |
10-16-2020, 09:50 AM | #54 |
Drives: 21 Bronco Join Date: Jun 2012
Location: Carol Stream
Posts: 6,024
|
unlimited poweeeeeerrrrrrrrrrrr!!!!!!!!
|
01-18-2021, 01:20 PM | #55 |
Account Suspended
Drives: 2017 Camaro ZL1 A10 Join Date: May 2012
Location: NJ
Posts: 7,692
|
My timeline for the work to be done on the ZL1 just moved up. So it's looking like I'll be ready to ship her out there in a couple months instead of towards the end of the year.
|
02-19-2021, 02:23 PM | #56 |
Account Suspended
Drives: 2017 Camaro ZL1 A10 Join Date: May 2012
Location: NJ
Posts: 7,692
|
I decided to add the flex fuel setup for E85 and a race gas tune setup to my package. I figure that will give me greater versatility for if I'm in different areas that have different fuels.
|
|
|
Post Reply
|
|
|