You are browsing camaro6 
09-27-2022, 07:51 AM
|
#1 |
  
Drives: 2017 Camaro SS 1LE (F1A-94 FBO H/C) Join Date: Jun 2017
Location: San Antonio Texas
Posts: 843
|
Procharger Question - help
I have been wanting to remove the filter off my procharger but have yet to find a plug or cap to replace where the hose goes from the procharger filter to the whatever that box is called, totally drawing a blank now that i think about it.
Regardless for those who have a procharger and run the inlet guard what did you all do or use to plug that area... not going to lie.... i feel pretty dumb that i cant think of what that box is called, sits to the left near the fuse box  
__________________
Performance Mods: F1A-94, DSX Flex Fuel Kit, MSD Spark Plug Wires, KOOK 2" off road headers, MBRP Race catback exhaust, Pray Performance Custom Boost Cam, Rocker Arm Trunion Upgrade Kit, 7.850" Hardened Chromemoly Length Pushrods and Johnson Racing 2110R Lifters, TSP CNC'd Heads, Ported MSD intake manifold, 103mm Katech Throttle body, Forged Pistons/Rods, RPM Meth kit, DSX Aux Fuel system, AEM Failsafe and banks gauge, LT4 HPFP, LT4 injectors, BMR motor mounts, Hurst Short Throw, Manley SS exhaust valves
Videos of my car? Check here: https://www.youtube.com/channel/UCNi...Qy1OL4NVGlPogw |
|
|
|
09-27-2022, 09:51 PM
|
#2 |
 Drives: 2019 Chevrolet Camaro SS Join Date: Apr 2021
Location: 405
Posts: 146
|
can you post a picture of said box? i don’t recall a box being near my fuse box
|
|
|
|
|
09-27-2022, 09:52 PM
|
#3 |
|
Drives: 2019 Chevrolet Camaro SS Join Date: Apr 2021
Location: 405
Posts: 146
|
wait nevermind. you talking about the breather?
|
|
|
|
|
09-27-2022, 10:05 PM
|
#4 |
|
Drives: 2019 Chevrolet Camaro SS Join Date: Apr 2021
Location: 405
Posts: 146
|
https://www.camaro6.com/forums/showthread.php?t=523268
this thread seems to have some good info. i’d check it out. I’m going to be ditching the filter soon as well so i’m interested to see this |
|
|
|
|
09-28-2022, 07:56 AM
|
#5 | |
|
Drives: 2017 Camaro SS 1LE (F1A-94 FBO H/C) Join Date: Jun 2017
Location: San Antonio Texas
Posts: 843
|
Quote:
__________________
Performance Mods: F1A-94, DSX Flex Fuel Kit, MSD Spark Plug Wires, KOOK 2" off road headers, MBRP Race catback exhaust, Pray Performance Custom Boost Cam, Rocker Arm Trunion Upgrade Kit, 7.850" Hardened Chromemoly Length Pushrods and Johnson Racing 2110R Lifters, TSP CNC'd Heads, Ported MSD intake manifold, 103mm Katech Throttle body, Forged Pistons/Rods, RPM Meth kit, DSX Aux Fuel system, AEM Failsafe and banks gauge, LT4 HPFP, LT4 injectors, BMR motor mounts, Hurst Short Throw, Manley SS exhaust valves
Videos of my car? Check here: https://www.youtube.com/channel/UCNi...Qy1OL4NVGlPogw |
|
|
|
|
|
10-07-2022, 07:35 AM
|
#6 |
|
Drives: 2017 Camaro SS 1LE (F1A-94 FBO H/C) Join Date: Jun 2017
Location: San Antonio Texas
Posts: 843
|
anyone run the procharger inlet? or have a way to plug the breatherbox from the current air filter setup?
__________________
Performance Mods: F1A-94, DSX Flex Fuel Kit, MSD Spark Plug Wires, KOOK 2" off road headers, MBRP Race catback exhaust, Pray Performance Custom Boost Cam, Rocker Arm Trunion Upgrade Kit, 7.850" Hardened Chromemoly Length Pushrods and Johnson Racing 2110R Lifters, TSP CNC'd Heads, Ported MSD intake manifold, 103mm Katech Throttle body, Forged Pistons/Rods, RPM Meth kit, DSX Aux Fuel system, AEM Failsafe and banks gauge, LT4 HPFP, LT4 injectors, BMR motor mounts, Hurst Short Throw, Manley SS exhaust valves
Videos of my car? Check here: https://www.youtube.com/channel/UCNi...Qy1OL4NVGlPogw |
|
|
|
|
10-07-2022, 02:48 PM
|
#7 |
 
Drives: 18 Camaro SS Join Date: Feb 2019
Location: Dripping Springs, TX
Posts: 53
|
Hi MP3BOOSTED.
Had the same issue when I redid the hoses for a new catch can setup. For the factory clean side box - I got an assorted set of caps like these. https://www.amazon.com/Dorman-02253-...02ERXXF6&psc=1 I then capped the Procharger filter with something like this. https://www.amazon.com/Piece-Flush-M.../dp/B00SZDGM3I Worked fine but may want to measure before you order to make sure you get the size you need. Hope that helps.
__________________
Previous Toys: 87 Camaro RS, 92 Camaro 25th Annive, 04 Acura RSX, 13 370z
|
|
|
|
|
10-11-2022, 08:10 AM
|
#8 | |
|
Drives: 2017 Camaro SS 1LE (F1A-94 FBO H/C) Join Date: Jun 2017
Location: San Antonio Texas
Posts: 843
|
Quote:
__________________
Performance Mods: F1A-94, DSX Flex Fuel Kit, MSD Spark Plug Wires, KOOK 2" off road headers, MBRP Race catback exhaust, Pray Performance Custom Boost Cam, Rocker Arm Trunion Upgrade Kit, 7.850" Hardened Chromemoly Length Pushrods and Johnson Racing 2110R Lifters, TSP CNC'd Heads, Ported MSD intake manifold, 103mm Katech Throttle body, Forged Pistons/Rods, RPM Meth kit, DSX Aux Fuel system, AEM Failsafe and banks gauge, LT4 HPFP, LT4 injectors, BMR motor mounts, Hurst Short Throw, Manley SS exhaust valves
Videos of my car? Check here: https://www.youtube.com/channel/UCNi...Qy1OL4NVGlPogw |
|
|
|
|
|
|
|
|
|
Post Reply
|
|
|
