[digitalfutur]

All the mods on my '18 RS are finally completed.

Front

*Front fascia extension in Mosaic black metallic
*Blacked out the single silver strip on either side of the lower grill
*Blacked out both front side markers

Rear

*Smoke tail-light overlay to black out the silver strip
*Redline Camaro logo
*V-Flag emblem from the 1st gen Camaro
*Blacked out the top of the RS logo (also on front)
*Borla Atak exhaust w/black tips
*Shark fin diffuser in gloss black

Under the hood

*Emblem hood plates
*Red stripe & HP emblem on engine cover
*Painted fluid cover caps in garnet red

Inside

*Dash kit in piano black (also on door lock and power window surrounds)
*Illuminated sill plates
*RS steering wheel emblem, floor mats & console cover
*Vent trim rings in garnet red (inspired by the Blazer RS)
*Red LED footwell lighting (not shown)
*Blacked out yellow air bag warning on both sun visors (not shown)

And my name is not John Bear, lol, that's the dealer name, but the logo and placement look cool.

[SQUALO]

Originally Posted by digitalfutur

All the mods on my '18 RS are finally completed.

Front

*Front fascia extension in Mosaic black metallic
*Blacked out the single silver strip on either side of the lower grill
*Blacked out both front side markers

Rear

*Smoke tail-light overlay to black out the silver strip
*Redline Camaro logo
*V-Flag emblem from the 1st gen Camaro
*Blacked out the top of the RS logo (also on front)
*Borla Atak exhaust w/black tips
*Shark fin diffuser in gloss black

Under the hood

*Emblem hood plates
*Red stripe & HP emblem on engine cover
*Painted fluid cover caps in garnet red

Inside

*Dash kit in piano black (also on door lock and power window surrounds)
*Illuminated sill plates
*RS steering wheel emblem, floor mats & console cover
*Vent trim rings in garnet red (inspired by the Blazer RS)
*Red LED footwell lighting (not shown)
*Blacked out yellow air bag warning on both sun visors (not shown)

And my name is not John Bear, lol, that's the dealer name, but the logo and placement look cool.

GREAT JOB ON EVERYTHING!!!. especially like the heritage badges you used.

[Yellow Beast]

[QUOTE=digitalfutur;10828547]All the mods on my '18 RS are finally completed.

Where did you get the holders in between the seats and the center console?

[digitalfutur]

From Amazon. They are very handy since the Camaro has basically zero storage,

https://www.amazon.ca/gp/product/B07...?ie=UTF8&psc=1

[Yellow Beast]

Originally Posted by digitalfutur

From Amazon. They are very handy since the Camaro has basically zero storage,

https://www.amazon.ca/gp/product/B07...?ie=UTF8&psc=1

Cool. Does it fit in between tight enough to not slip out?

[BlakeR]

Sport pedals, blackout vinyl on side markers, replace red ss with dark gray, remove front fender badge, lloyds floor mats, switched star shaped center cap for round one on wheels...now, what's next? Carbon fiber splitter and side skirts !!! Anyone put the front fender emblem in another spot? I liked it on my silver car, but sticks out too much on this one.

[digitalfutur]

Yes, though I did add a couple of these Velcro strips to each one to secure them better in fast cornering !

https://www.amazon.com/Command-Pictu...s%2C156&sr=8-5

[RWT]

Originally Posted by BlakeR

Sport pedals, blackout vinyl on side markers, replace red ss with dark gray, remove front fender badge, lloyds floor mats, switched star shaped center cap for round one on wheels...now, what's next? Carbon fiber splitter and side skirts !!! Anyone put the front fender emblem in another spot? I liked it on my silver car, but sticks out too much on this one.

Nice, tasteful mods. Good looking car!

[Cyrus]

Originally Posted by digitalfutur

All the mods on my '18 RS are finally completed.

Front

*Front fascia extension in Mosaic black metallic
*Blacked out the single silver strip on either side of the lower grill
*Blacked out both front side markers

Rear

*Smoke tail-light overlay to black out the silver strip
*Redline Camaro logo
*V-Flag emblem from the 1st gen Camaro
*Blacked out the top of the RS logo (also on front)
*Borla Atak exhaust w/black tips
*Shark fin diffuser in gloss black

Under the hood

*Emblem hood plates
*Red stripe & HP emblem on engine cover
*Painted fluid cover caps in garnet red

Inside

*Dash kit in piano black (also on door lock and power window surrounds)
*Illuminated sill plates
*RS steering wheel emblem, floor mats & console cover
*Vent trim rings in garnet red (inspired by the Blazer RS)
*Red LED footwell lighting (not shown)
*Blacked out yellow air bag warning on both sun visors (not shown)

And my name is not John Bear, lol, that's the dealer name, but the logo and placement look cool.

Why not swap out the tail lights and 3rd brake light with the smoked OEM ones to complete your blackout look ?

[wilbur_xmas]

Finally, after a month (darn landscaping projects) I have completed my ownership ritual of:

• Fresh oil and filter
• Drain and fill of transmission fluid
• Drain and fill of differential fluid
• Fresh street brake pads (Powerstop Z26 to cut down on dust and save stock pads for track)
• Fresh brake/clutch fluid

Sidenote: second picture shows just how stiff this chassis is and how uneven my garage floor is. With all jackstands at the same height only 3 are in contact with the jack pads. I've lifted quite a few cars in this garage and this is the first time I have seen this. Quite a testament to the stiffness of the Alpha chassis.

[caSStro18]

Originally Posted by wilbur_xmas

Finally, after a month (darn landscaping projects) I have completed my ownership ritual of:

• Fresh oil and filter
• Drain and fill of transmission fluid
• Drain and fill of differential fluid
• Fresh street brake pads (Powerstop Z26 to cut down on dust and save stock pads for track)
• Fresh brake/clutch fluid

Sidenote: second picture shows just how stiff this chassis is and how uneven my garage floor is. With all jackstands at the same height only 3 are in contact with the jack pads. I've lifted quite a few cars in this garage and this is the first time I have seen this. Quite a testament to the stiffness of the Alpha chassis.

I have a question...How do I lift the car with a jack at the jack point and then place a jack stand at the same jack point?

[Zaqwert6]

Originally Posted by caSStro18

I have a question...How do I lift the car with a jack at the jack point and then place a jack stand at the same jack point?

There are two at the front. Jack on one, then stand on the other.

[digitalfutur]

Originally Posted by Cyrus

Why not swap out the tail lights and 3rd brake light with the smoked OEM ones to complete your blackout look ?

I did have a look at those. They aren't really a dark smoke so there's a lighter greyish tint to them which introduces another color. I do like the red/black combo which is why I didn't black out the rear side markers.

[Cyrus]

Originally Posted by digitalfutur

I did have a look at those. They aren't really a dark smoke so there's a lighter greyish tint to them which introduces another color. I do like the red/black combo which is why I didn't black out the rear side markers.

Makes sense. Looks great.