07-18-2020, 09:38 PM | #2 |
Drives: 2016 Camaro 2SS Join Date: Dec 2015
Location: Philadelphia
Posts: 771
|
I have them on my car... they sure seem like they would flex way less than the stock parts. As for how useful that actually is, ehh I don't think anyone put the car through a torsional rigidity analysis with the braces installed. I was putting all the other BMR rear suspension bits on the car so I figured I'd swap those braces out as well.
__________________
|
07-25-2020, 09:12 PM | #3 |
Drives: '21 ZLE A10 Join Date: May 2012
Location: Mechanicsville, VA
Posts: 6,808
|
Since I have a ZL1, I installed the CB008 only in front if rear cradle and have no idea if it made any difference. The factory piece there is chintzy and weak appearing.
__________________
'21 ZLE A10 Wild Cherry PDR 2:00.78 VIR Full 10.68@131.69 1.68 60'
'17 ZL1 A10 Mosaic Black PDR/Nav 2:03.08 VIR Full 11.003@129.2 1.75 (sold) '15 Z/28 #325 Black a/c & stereo. 2:10.1 VIR Full (sold) '12 ZL1 A6 Black 10.52@131 1.55 60' 2:13 VIR Full (sold) |
|
|
Post Reply
|
|
|