03-16-2022, 11:41 AM | #1 |
Drives: Satin Steel Camaro 2SS M6 (ordered) Join Date: Sep 2021
Location: Vancouver BC, Canada
Posts: 10
|
Foglight issue
Hello all,
I have noticed that the passenger side foglight on my 2022 2SS is considerably dimmer than the driver side. I know for a fact it was good when I got the car, but now after around 3000km it has gone dim. Any ideas? Has this happened to any of you? Also wondering if my full coverage warranty would cover this. Seems goofy that after only owning the car for 3 months I might need to dump $200 into a defective factory part. Any advice/ideas welcome. Cheers, James |
03-16-2022, 12:57 PM | #2 |
Drives: 2021 300 Join Date: Jan 2015
Location: New Jersey
Posts: 968
|
Its under warranty. 3 year 36,000 miles Bumper to Bumper.
|
03-16-2022, 12:59 PM | #3 |
Drives: 2017 2SS, 50th pkg, M6, MRC, NPP Join Date: Jan 2016
Location: Ocean City, NJ
Posts: 3,181
|
That's your right side daytime running light. Not a fog light.
Should be covered under warranty. I would first suspect a connection problem. |
03-16-2022, 01:41 PM | #4 |
Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 11,607
|
A connection issue is all the more likely because these have two modes, dim and full bright, so it could be stuck in the former due to a wiring harness or connector failure.
Take the car in and let the service department figure it out (make sure they know you care about the paint on your bumper, so they should, too, when removing it).
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 |
03-16-2022, 05:52 PM | #5 |
Drives: Satin Steel Camaro 2SS M6 (ordered) Join Date: Sep 2021
Location: Vancouver BC, Canada
Posts: 10
|
Awesome, thanks guys!
I’ll make sure and get that taken care of next time I take it in. Cheers |
|
|
Post Reply
|
|
|