Homepage Garage Wiki Register Social Groups Calendar Search Today's Posts Mark Forums Read
#Camaro6
Go Back   CAMARO6 > CAMARO6.com General Forums > 2016+ Camaro: 6th Gen Camaro general forum


Phastek Performance


Post Reply
 
Thread Tools
Old 03-16-2022, 11:41 AM   #1
James Froese
 
James Froese's Avatar
 
Drives: Satin Steel Camaro 2SS M6 (ordered)
Join Date: Sep 2021
Location: Vancouver BC, Canada
Posts: 10
Foglight issue

Hello all,

I have noticed that the passenger side foglight on my 2022 2SS is considerably dimmer than the driver side. I know for a fact it was good when I got the car, but now after around 3000km it has gone dim.

Any ideas? Has this happened to any of you? Also wondering if my full coverage warranty would cover this.

Seems goofy that after only owning the car for 3 months I might need to dump $200 into a defective factory part.

Any advice/ideas welcome.

Cheers,

James
Attached Images
 
James Froese is offline   Reply With Quote
Old 03-16-2022, 12:57 PM   #2
Jeb114

 
Jeb114's Avatar
 
Drives: 2021 300
Join Date: Jan 2015
Location: New Jersey
Posts: 935
Its under warranty. 3 year 36,000 miles Bumper to Bumper.
Jeb114 is offline   Reply With Quote
Old 03-16-2022, 12:59 PM   #3
ctrlz

 
Drives: 2017 2SS, 50th pkg, M6, MRC, NPP
Join Date: Jan 2016
Location: Ocean City, NJ
Posts: 2,202
That's your right side daytime running light. Not a fog light.
Should be covered under warranty.
I would first suspect a connection problem.
ctrlz is offline   Reply With Quote
Old 03-16-2022, 01:41 PM   #4
arpad_m


 
arpad_m's Avatar
 
Drives: 2018 Camaro 2SS A8
Join Date: Jul 2017
Location: East Tennessee
Posts: 7,634
A connection issue is all the more likely because these have two modes, dim and full bright, so it could be stuck in the former due to a wiring harness or connector failure.

Take the car in and let the service department figure it out (make sure they know you care about the paint on your bumper, so they should, too, when removing it).
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq

Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle terminator cam | LT4 FS & injectors | TSP forged pistons & rods
JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune

1100 - 1/30/18 | 2000 - 1/31/18
3000 - 2/06/18 TPW 2/26/18
3400 - 2/19/18 | 3800 - 2/26/18
4300 - 2/27/18 | 4B00 - 3/01/18
4200 - 3/05/18 | 4800 - 3/14/18
5000 - 3/16/18 | 6000 - 3/19/18
arpad_m is offline   Reply With Quote
Old 03-16-2022, 05:52 PM   #5
James Froese
 
James Froese's Avatar
 
Drives: Satin Steel Camaro 2SS M6 (ordered)
Join Date: Sep 2021
Location: Vancouver BC, Canada
Posts: 10
Awesome, thanks guys!

I’ll make sure and get that taken care of next time I take it in.

Cheers
James Froese is offline   Reply With Quote
 
Post Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:35 PM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2022, vBulletin Solutions, Inc.