10-24-2016, 10:16 AM | #1 |
Drives: 2016 SS 6 Spd Join Date: Jul 2009
Location: Ohio - www.rpidesigns.com
Posts: 3,055
|
NEW Camaro 6th Generation Retro Style High Rise Rear Spoiler At RPI Designs
2016-2017 Camaro 6th Generation Retro Style High Rise Rear Spoiler
Our spoiler is one of the only aftermarket 6th Gen Camaro rear spoilers that will cover the holes left from the factory pedestal mount spoiler. RPI Designs is excited to release our first generation inspired high rise rear spoiler. Our 6th Gen rear spoiler is made of fiberglass right here in our Salem, Ohio shop. Each 2016-2017 Camaro rear spoiler is hand built and comes available in flat black or can be ordered in any 2016-2017 Camaro exterior body paint color. This spoiler will install in factory hole locations with provided hardware in addition, you'll need to drill three new holes. We do provide a template with each kit for easy drilling. Please note, cars with factory holes will need the holes tapered out slightly to accommodate the new bolts built into our rear spoiler. Installation time for cars with a factory rear spoiler will take 15-20 minutes, cars without factory spoiler can figure an additional 20-30 minutes. The satin flat/flat black ships in 2-3 days, while the custom body colors take 3-4 weeks from order date to ship date. Please consider this when placing your order for your new 6th Generation Camaro rear spoiler. Fitment: 2016-2017 Chevrolet Camaro Please click on link to vendor section for pricing and information. http://www.camaro6.com/forums/showthread.php?t=470984 Last edited by RPI Designs; 11-07-2016 at 12:07 PM. |
10-24-2016, 10:20 AM | #2 |
マスタング = 遅い
Drives: 2017 Chevrolet Camaro SS 1LE Join Date: Aug 2015
Location: Florida
Posts: 7,061
|
Looks good...
|
10-24-2016, 11:02 AM | #3 |
Drives: 2017 SS 1LE Join Date: Mar 2016
Location: Monterey, CA
Posts: 2,474
|
Ohhhh I like it! Similar size to the 6LE one, maybe a tad bit lower but the notch in the center gives it some extra character that I think it needs. Very well done RPI!!!
|
10-24-2016, 11:08 AM | #4 |
Drives: 2016 SS2 Join Date: Oct 2016
Location: Las Vegas NV
Posts: 88
|
Looks good!
Do you have any pics of the matte black installed? |
10-24-2016, 11:30 AM | #5 |
Drives: 2016 SS 6 Spd Join Date: Jul 2009
Location: Ohio - www.rpidesigns.com
Posts: 3,055
|
|
10-24-2016, 11:58 AM | #6 |
Left Lane Enforcer
Drives: '18 ZL1 1LE. Join Date: Jul 2016
Location: New York City
Posts: 292
|
Do ya'll have an orange spoiler?
__________________
Current Cars:
2018 Camaro ZL1 1LE 2012 Ford Focus SE 1994 Evo II Previous Cars: 2017 Camaro SS 2014 Chevy Malibu LTZ |
10-24-2016, 01:19 PM | #7 |
Drives: 2018 ZL1 Join Date: Feb 2016
Location: Scranton pa
Posts: 305
|
Also looks like it's 1 peice rather than three pieces like 6le's. I like it!
__________________
|
10-24-2016, 01:38 PM | #8 |
Drives: 2017 SS 1LE Join Date: Mar 2016
Location: Monterey, CA
Posts: 2,474
|
|
10-24-2016, 01:42 PM | #9 |
Pull up Cougar!
Drives: 2016 2SS Join Date: Jul 2011
Location: San Diego
Posts: 2,875
|
But will it be $850 like the ACS one? lol
I kinda wish it was angled back a bit more. Can we get some side shots? |
10-24-2016, 02:05 PM | #10 |
Drives: 2017 SS 1LE Join Date: Mar 2016
Location: Monterey, CA
Posts: 2,474
|
|
10-24-2016, 02:34 PM | #11 |
Drives: 2016 Camaro 2ss Join Date: Feb 2016
Location: Orlando
Posts: 206
|
I'll make a decision once I see it in black on the car!
|
10-24-2016, 03:08 PM | #12 |
Drives: 2016 SS 6 Spd Join Date: Jul 2009
Location: Ohio - www.rpidesigns.com
Posts: 3,055
|
|
10-24-2016, 03:09 PM | #13 |
Drives: 2016 SS 6 Spd Join Date: Jul 2009
Location: Ohio - www.rpidesigns.com
Posts: 3,055
|
|
10-24-2016, 03:11 PM | #14 | |
Drives: 2016 SS 6 Spd Join Date: Jul 2009
Location: Ohio - www.rpidesigns.com
Posts: 3,055
|
Quote:
http://www.camaro6.com/forums/showthread.php?t=470984 More pictures: Last edited by RPI Designs; 10-25-2016 at 08:35 AM. |
|
|
|
Post Reply
|
|
|