10-01-2021, 02:14 PM | #1 |
Drives: 2018 Camaro SS vert Join Date: Oct 2020
Location: CT
Posts: 449
|
Added some color to the hood liner
Decided I wanted to add some color to the hood liner, was going to make my own panels but found a great deal and bought a set in red/white/blue
Took almost 8 weeks for them to get here and when they did one piece had a scratch so I decided since I wasn't really happy with the colors they used I would redo them myself. Now I have a heavy metallic red/blue and a bright white center panel. Just sprayed clear coat over the whole thing, once dry it will be back on the car.
__________________
|
10-01-2021, 02:18 PM | #2 |
Drives: 2016 1ss camaro Join Date: Feb 2016
Location: 909
Posts: 9,813
|
looks good my hood line is so jacked up from car wash places and my air intake probably need to replace it lol
__________________
16 1SS NIGHTFALL GRAY METALLIC WITH NPP #BECAUSERACECAR #SAVETHEMANUALS
|
10-01-2021, 06:40 PM | #3 |
Drives: "Kara Zor-El" 2017 2SS HBM Join Date: Jul 2014
Location: Lower Hudson Valley
Posts: 2,036
|
Looks good.
How do they attach?
__________________
Lead me not into temptation. I already know the way.
Lana? Lana? LANA! LAAANAAAA!!!! What? Dangerzoooooone. |
10-01-2021, 06:53 PM | #4 |
Drives: 19' ZL1 A10, w/pdr Join Date: Sep 2014
Location: S.W. ohio
Posts: 1,551
|
Our underhood area on these cars could be better. Adding some color like what you have done definitely improves the looks. Keep on modding.
__________________
BTR Stg II cam w/ 38% fuel lobe, ARH 2" headers into 3" w/cats, AWE Touring, Kong X port, Weapon X triple ht exchangers, NW 103, Rotofab big gulp, DSX lowside, TCM tune, BMR Lockout, Mustang dyno 720 rwhp, 634 rwtq on 93 pump.
|
10-02-2021, 03:39 PM | #5 |
Drives: 2018 Camaro SS vert Join Date: Oct 2020
Location: CT
Posts: 449
|
They gave a tube of silicone adhesive, I decided to use 3M VHB instead
__________________
|
10-02-2021, 06:19 PM | #6 |
Hot Camaro
Drives: '20 2SS Convertible 6MT Join Date: May 2020
Location: CT
Posts: 3,534
|
That will look nice with the hood up at the shows.
What are the made of? Plastic? Metal? I'm wondering how easily they could be cut from a hard piece of ABS as a total DIY... Hmmm... |
10-03-2021, 06:46 PM | #7 | |
Drives: 2018 Camaro SS vert Join Date: Oct 2020
Location: CT
Posts: 449
|
Quote:
I really should have saved the $$ and just made them myself
__________________
|
|
10-11-2021, 09:03 AM | #8 |
Drives: 2016 Camaro 2SS Hyper Blue Metallic Join Date: May 2020
Location: WI
Posts: 2,451
|
Nice... I like that!
|
10-16-2021, 07:30 AM | #9 |
Drives: 2018 2ss 1le Join Date: Jan 2018
Location: Huntington, NY
Posts: 474
|
so i am trying to do the same but want to replace my hood liner because it got ruined in a couple of spots...
but i can not find where to order the hoodliner looks like if i order it from gm it does not come with the vent holes cut out? any body have this issue, or know where to buy one? i have a 2018 2ss 1le
__________________
2018 2ss 1le roto fab dry, Stainless works 1 7/8 lt to 3'" x pipe with highflow cats to stock npp, soler 95mm t/b, edelbrock 2300, LT4 fueling , jms bap and dsx flex fuel, 618/620 on e45 rwhp
Jannetty Motorsports tuned |
|
|
Post Reply
|
|
|