[Trochoidal]

Originally Posted by 20Bluezl1

There is a couple threads with some guys running my same setup just can't seem to find them to provide a link.

Sorry not sure how to rotate pictures

Just a quick edit. I always preview my post to see if pictures need rotation. If they do I save the out of rotation picture, rotate it, upload and preview again.

[Trochoidal]

Originally Posted by 7LitreC5

For those of you using one of the Banks gauges, are you using it with the Aeroforce defroster vent gauge pod?

Originally Posted by Busted43

Thanks for the info everyone, looks like that’s next on the list. Anybody have any pictures of how they mounted it in their vehicle.

I made a blueprint, solid model and printed a pod to hold the gauge in the vent.

[20Bluezl1]

Originally Posted by Trochoidal

Just a quick edit. I always preview my post to see if pictures need rotation. If they do I save the out of rotation picture, rotate it, upload and preview again.

thank you ill try that next time.

[20Bluezl1]

Originally Posted by Trochoidal

I made a blueprint, solid model and printed a pod to hold the gauge in the vent.

That was the way I was going to go and I bought the same pod from member DorkMissile but I needed to also run a wideband so I want with the zzp instead.

[Busted43]

Originally Posted by 20Bluezl1

That was the way I was going to go and I bought the same pod from member DorkMissile but I needed to also run a wideband so I want with the zzp instead.

How is the fit of the zzp mount?

[Joshinator99]

Originally Posted by Busted43

How is the fit of the zzp mount?

Mint. OEM quality. I was very impressed with it.

[20Bluezl1]

Originally Posted by Joshinator99

Mint. OEM quality. I was very impressed with it.

I only had one issue with the clip you have to reuse from the oem, it didn't want to clip on to the pillar. But I got it on and its a great fit.

[7LitreC5]

That is awesome! Are you set up to make more of those?

Originally Posted by Trochoidal

I made a blueprint, solid model and printed a pod to hold the gauge in the vent.

[Trochoidal]

Originally Posted by 7LitreC5

That is awesome! Are you set up to make more of those?

Yes I’m able to make more of these. Printer was down for upgrades.

[gtfoxy]

Originally Posted by Trochoidal

Yes I’m able to make more of these. Printer was down for upgrades.

Is that a metal printer?

[7LitreC5]

Cool. I have a couple of questions.

Does it snap into the dash just like the stock vent?
How does the trim ring attach to your part?
The stock vent is deeper. Does your mount attach to the stock vent or replace it?
How does the gauge attach to your mount?

Thanks

Originally Posted by Trochoidal

Yes I’m able to make more of these. Printer was down for upgrades.

[Trochoidal]

Originally Posted by gtfoxy

Is that a metal printer?

No this is FFF (fused filament fabrication) style printer. Metal printer, even in consumer grade, is pricey.

[Trochoidal]

Originally Posted by 7LitreC5

Cool. I have a couple of questions.

Does it snap into the dash just like the stock vent?
How does the trim ring attach to your part?
The stock vent is deeper. Does your mount attach to the stock vent or replace it?
How does the gauge attach to your mount?

Thanks

This pod directly replaced the stock vent/diverter. The factory vent/diverted is captured by a spherical bore (socket). The two halves of the socket are most likely fused at the seam during production after the vent/diverted is in place.

The trim ring is attached to the factory vent housing.

This mount goes inside of stock vent housing.

The gauge attached to the mount using the supplied clamp provided by the garage manufacturer. Slide the gauge through the front and the clamp in the rear has two plastic thumb screws the keep the gauge in place.

https://www.camaro6.com/forums/showt...php?p=10772205

[Heartbreaker]

Originally Posted by Busted43

Been looking at supplement data gauges and wonder if anyone here has any experience with the Banks data monster.

. Installing the Banks Supergauge this week to monitor E% (and other things) on the flex fuel upgrade.