[ckahsen]

Hello all,

I am having issues getting the correct end pieces for my spoiler. I have gotten just about every color expect for satin black. I'm at the point where I just need to provide them with the correct part number beings they have no idea what car I actually purchased from them.

2017 SS 1LE

Sent from my SM-G955U using Tapatalk

[pbsinternet1le]

Did u look in the trunk? Mine were in a box..

[TrackClub]

Your 1LE should have come with it - did it not?

[ckahsen]

Originally Posted by pbsinternet1le

Did u look in the trunk? Mine were in a box..

Yeah mine came originally with 2 left pieces. This has been an 8 month ordeal (I bought the car on President's day). They then sent red ones (which I didn't even know they made), then claimed they were back ordered etc etc. I've been getting the run around from everyone. I got the general manager involved and he is who had these gloss black ones sent.

Sent from my SM-G955U using Tapatalk

[ckahsen]

This is currently what I'm working with lol. I have the center piece.

Sent from my SM-G955U using Tapatalk

[Matos1LE]

Originally Posted by ckahsen

This is currently what I'm working with lol. I have the center piece.

Sent from my SM-G955U using Tapatalk

I was just on the Chevy accessories page the other day and I noticed they carry them in quite a few colors but I did not see satin ones. I'd be tempted to have them get me the whole thing in gloss black. Will probably hold up better toward UV damage...guessing they are painted.

[ckahsen]

Originally Posted by Matos1LE

I was just on the Chevy accessories page the other day and I noticed they carry them in quite a few colors but I did not see satin ones. I'd be tempted to have them get me the whole thing in gloss black. Will probably hold up better toward UV damage...guessing they are painted.

They actually sent me the whole spoiler kit this time, not just the end pieces. I'd change the whole thing out, except the gloss black spoiler would not match the mirrors or the front splitter, which are the same color as the center piece of my spoiler pictured above.

Sent from my SM-G955U using Tapatalk

[nasbagoat]

23277750 is the number my catalog shows me with the vin applied for replacement spoiler end caps.


edit: that number supersedes to 84242704 and then to 84289253 .

[Nabush]

So guys, is this item#23277750 the right one for satin black ?

I'm in the same boat...

[50MileSmile]

The Part No. on the box in my trunk with the satin black ends is 84289253. The pieces themselves don’t have a Part No. on them - just a sticker with the production date. And the parts are painted separately from the spoiler, so you may not get an exact color/surface/texture match.



BTW, if you leave the ends off, your 1LE will be 2.3 mph faster on the top end.

[Nabush]

Originally Posted by 50MileSmile

The Part No. on the box in my trunk with the satin black ends is 84289253. The pieces themselves don’t have a Part No. on them - just a sticker with the production date. And the parts are painted separately from the spoiler, so you may not get an exact color/surface/texture match.



BTW, if you leave the ends off, your 1LE will be 2.3 mph faster on the top end.

Thanks, but this part number is not sold anymore....

And the part 23277750 is... and way cheaper....Just want to be sure before pulling the trigger ... Previous members were telling this was the new ref but just wanna be sure...

[camaroJD]

Do dealers not install them usually? Would I be better off requesting I install these myself?

[50MileSmile]

Originally Posted by camaroJD

Do dealers not install them usually? Would I be better off requesting I install these myself?

The dealer should do it as part of the PDI. Installation includes sanding the tops of the fenders, and using adhesive promoter and trim adhesive that doesn’t come with the spoiler ends. The instructions are included; this is not just a peel-and-stick installation with double-face foam tape.

[camaroJD]

Originally Posted by 50MileSmile

The dealer should do it as part of the PDI. Installation includes sanding the tops of the fenders, and using adhesive promoter and trim adhesive that doesn’t come with the spoiler ends. The instructions are included; this is not just a peel-and-stick installation with double-face foam tape.

I figured as much, thanks. Hopefully whoever does them on mine has some experience.