Running same size 1LE wheels all around? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Black 6.2L SS · 04-27-2019, 10:48 PM

4 months ago I bought a black 2014, 1SS/RS with an LS3. Since it has the RS package it has the "midnight silver" wheels. They are decent looking, but I really like the black 1LE wheels. I'd like to buy some eventually.

I'm pretty sure my stock wheels are 20x8" (front) and 20x9" (rear) sizes. 245/45-20 (front) and 275/40-20 (rear).

Question: 1LE wheels are 20x10 and 20x11 sizes. As long as I'm buying, I'd like it set up so that I can rotate my tires. I don't track the car. Can four 20x10 1LE wheels be run on all four corners with the proper 285/35-20 size tire all around? Look okay?

Thanks in advance.

Scott@Bjorn3D · 04-28-2019, 06:01 AM

I run 20x10 on all 4 corners with 285/35 tires. Works great and handling is better.

Black 6.2L SS · 04-28-2019, 09:09 AM

Good to know! Do you have a pic?

Rons1le · 04-28-2019, 11:07 PM

1LE factory rims 20x10 are front only and the 20x11 are rear only do to there offset..

Sent from my SM-G960U using Tapatalk

jcampos · 04-29-2019, 10:06 AM

Quote:

Originally Posted by Black 6.2L SS

Good to know! Do you have a pic?

GOOGLE my friend... It will look identical to a factory 1LE...

SSEssence · 04-29-2019, 10:23 AM

A lot of people run same size wheels and tires for track use and to be able to rotate tires. 20x10 with 285/35/20 seem to work for most people.

Black 6.2L SS · 04-29-2019, 01:26 PM

Quote:

Originally Posted by jcampos

GOOGLE my friend... It will look identical to a factory 1LE...

The reason I was interested in a pic was to see how the offset would look when running 1LE 20x10" front wheels on the rear of the car, (to achieve the same sizes all around; 285/35-20 on four 20x10" rims).

It sounds like guys run that way so any offset variation must not be too bad.
Thanks everyone!

Zombie killer · 04-29-2019, 11:18 PM

Although my go to wheel setup is 19x11 (305s square) , some events I am limited to 285s and I stretch them slightly on 20x10.5” rims. This is about as wide as you can go and keep the offsets the same for rotating. I had custom 4 mm plates made for the fronts to clear the Brembos on the style rim I chose.

hrpiii · 04-30-2019, 06:24 AM

Quote:

Originally Posted by Zombie killer

Although my go to wheel setup is 19x11 (305s square) , some events I am limited to 285s and I stretch them slightly on 20x10.5” rims. This is about as wide as you can go and keep the offsets the same for rotating. I had custom 4 mm plates made for the fronts to clear the Brembos on the style rim I chose.

When Zombie Killer talks, shut up and listen, you about to be educated on some s**t. He knows his stuff when it comes to your car and setup.

jksynergy · 05-01-2019, 08:09 PM

You would be fine. The offset on the front 1LE wheels is +23. I run a 20x10 square setup on our 1LE with out any issues. My offset is +20 and no issues with clearance.

Sent from my SM-T377T using Tapatalk

Black 6.2L SS · 05-01-2019, 08:33 PM

Thanks.
I read on the 1LE section’s tire and wheel statistics that the front wheel offset is 23 and the rear wheel offset is 43. That sounds like a big difference.....so my original concern was that I didn’t want the front sized rims to not look flush (nice) with the rear fender lip.

(Awesome looking car by the way!)

jksynergy · 05-01-2019, 08:57 PM

Quote:

Originally Posted by Black 6.2L SS

Thanks.
I read on the 1LE section’s tire and wheel statistics that the front wheel offset is 23 and the rear wheel offset is 43. That sounds like a big difference.....so my original concern was that I didn’t want the front sized rims to not look flush (nice) with the rear fender lip.

(Awesome looking car by the way!)

They will be slightly in compared to our setup. I do run 285/35's all around also.

Sent from my SM-T377T using Tapatalk

StingrayblueSS · 05-02-2019, 07:14 PM

Quote:

Originally Posted by Black 6.2L SS

Thanks.
I read on the 1LE section’s tire and wheel statistics that the front wheel offset is 23 and the rear wheel offset is 43. That sounds like a big difference.....so my original concern was that I didn’t want the front sized rims to not look flush (nice) with the rear fender lip.

(Awesome looking car by the way!)

The 1le has a 20x11 on the rear with 43 offset and 20x10 front 23 offset. 285 tire all the way around.

terry_b · 06-22-2019, 07:02 PM

For my winter wheels, I run 20x10 23 offset on front and rear (which is the same as the OEM 1LE front).

Fit is perfect, the rear actually sticks out just a bit more on this setup. Should be a non issue if you are stock height, but if you lower it you might run into issues with rubbing on the plastic fender liner - mostly over bumps.

04-27-2019, 10:48 PM	#1
Black 6.2L SS Drives: 2014 1SS/RS, LS3, NPP Join Date: Feb 2019 Location: Florida Posts: 184	Running same size 1LE wheels all around? 4 months ago I bought a black 2014, 1SS/RS with an LS3. Since it has the RS package it has the "midnight silver" wheels. They are decent looking, but I really like the black 1LE wheels. I'd like to buy some eventually. I'm pretty sure my stock wheels are 20x8" (front) and 20x9" (rear) sizes. 245/45-20 (front) and 275/40-20 (rear). Question: 1LE wheels are 20x10 and 20x11 sizes. As long as I'm buying, I'd like it set up so that I can rotate my tires. I don't track the car. Can four 20x10 1LE wheels be run on all four corners with the proper 285/35-20 size tire all around? Look okay? Thanks in advance.

04-28-2019, 11:07 PM	#4
Rons1le Drives: 2015 Camaro 2SS RS 1LE AGM Join Date: Oct 2013 Location: Galion, Oh Posts: 531 View My Garage	1LE factory rims 20x10 are front only and the 20x11 are rear only do to there offset.. Sent from my SM-G960U using Tapatalk __________________ 2015 2SS RS 1LE NPP/w Kooks headers, Procharged, ID1050X injectors, Katech belt tensioner, Mighty Mouse Catch Can, BMR subframe connectors, Matco driveshaft loop, AEM Wideband/Boost/Fuel gauges , Z/28 Splitter and Spoiler/w Wicker bill, Power Stop rotors and brake pads, MRR Z/28 Rep Wheels 20" w/p zeros 285 fronts and 305 rears, ZL1 addons Rock guards and Tow hook, Rear window louvers, Flags on the quarter windows and the moonroof, Billet aluminum door handles.

04-29-2019, 10:23 AM	#6
SSEssence Instagram: Sangstah Drives: 2019 Camaro 1LE Join Date: Sep 2016 Location: Buena Park, CA. Posts: 2,799 View My Garage	A lot of people run same size wheels and tires for track use and to be able to rotate tires. 20x10 with 285/35/20 seem to work for most people. __________________ 2019 SS 1LE - "CaSSandra" 2014 SS - "AleSSandra - Sold" 94 Z28 - Sold Follow the build https://www.camaro6.com/forums/showthread.php?t=612717

04-29-2019, 11:18 PM	#8
Zombie killer Emerald Coast Camaros Drives: 2013 2SS/RS L99 Join Date: Dec 2013 Location: Pensacola Fla. ~Mike & Kym~ Posts: 656 View My Garage	Although my go to wheel setup is 19x11 (305s square) , some events I am limited to 285s and I stretch them slightly on 20x10.5” rims. This is about as wide as you can go and keep the offsets the same for rotating. I had custom 4 mm plates made for the fronts to clear the Brembos on the style rim I chose. Attached Images __________________

05-01-2019, 08:09 PM	#10
jksynergy Drives: 11 SW SYNERGY SERIES/14 1SS 1LE Join Date: May 2012 Location: Missouri Posts: 1,223	You would be fine. The offset on the front 1LE wheels is +23. I run a 20x10 square setup on our 1LE with out any issues. My offset is +20 and no issues with clearance. Sent from my SM-T377T using Tapatalk __________________ 2011 Summit White Synergy Series Edition, the hot innocent woman named Ava that we show off around town, dressed in white complete with angel's wings. Sold, but never forgotten. 2014 1SS 1LE. Bama, sporting Red Rock Metallic demon's horns, when we are ready to get naughty and open a can of whoopass! Airaid, Spectre, Xpel,Bowler shifter Peddars, UMI, Ult Perf. Diode Dynamics, JRE Tune, XS Power battery, Hooker Headers Blackheart exhaust,Powerbrake InstaGram & Twitter: @jlouie62 FB: hangtimeracing

04-28-2019, 06:01 AM	#2
Scott@Bjorn3D Drives: Kami, 2013 2SS LS3 Luvin Join Date: Oct 2008 Location: Eufaula, Alabama Posts: 6,427	I run 20x10 on all 4 corners with 285/35 tires. Works great and handling is better.

04-28-2019, 09:09 AM	#3
Black 6.2L SS Drives: 2014 1SS/RS, LS3, NPP Join Date: Feb 2019 Location: Florida Posts: 184	Good to know! Do you have a pic?

05-01-2019, 08:33 PM	#11
Black 6.2L SS Drives: 2014 1SS/RS, LS3, NPP Join Date: Feb 2019 Location: Florida Posts: 184	Thanks. I read on the 1LE section’s tire and wheel statistics that the front wheel offset is 23 and the rear wheel offset is 43. That sounds like a big difference.....so my original concern was that I didn’t want the front sized rims to not look flush (nice) with the rear fender lip. (Awesome looking car by the way!)

06-22-2019, 07:02 PM	#14
terry_b Drives: 2014 2SS/RS 1LE Join Date: Apr 2010 Location: Hudson, MA Posts: 1,387 View My Garage	For my winter wheels, I run 20x10 23 offset on front and rear (which is the same as the OEM 1LE front). Fit is perfect, the rear actually sticks out just a bit more on this setup. Should be a non issue if you are stock height, but if you lower it you might run into issues with rubbing on the plastic fender liner - mostly over bumps. __________________ 2014 2SS/RS 1LE