Triangle Speed Shop single turbo kit - Page 3

Gmanuel · 07-13-2016, 12:52 AM

Quote:

Originally Posted by laynlo15

Just let them do their work and you'll get a better kit. Everybody kept asking CAI to get their intake kit out and they finally did then the complaining begins. Come on this is custom work and they don't want failures on their watch. Just be patient and it will come. Then we'll see if everybody that says they are in actually purchase the turbo kit. It will have to be priced in the procharger and supercharger ranges or nobody will buy them and they know that, so hope it works out for all that want one.

If this kit gives me more headroom than the blowers, I wouldnt mind paying a little bit of a premium.

JDCoon · 07-26-2016, 06:02 PM

We will be testing the car this weekend at the NMRA/NMCA race in Joliet, IL. Come check it out if any of you guys are in the neighborhood. I will report back with some times.

laynlo15 · 07-26-2016, 09:48 PM

Good luck JD. Hope it makes some good passes. I'm assuming you'll run it in true street or rumble. Hopefully you'll be at the Holley Fest in Sept. If so I'll see you there

Lemosine · 07-27-2016, 02:35 PM

deff interested in this, nothing beats the sound of a waste gate dump and a turbo spooling.

Tcamaro · 07-27-2016, 08:12 PM

Quote:

Originally Posted by JDCoon

We will be testing the car this weekend at the NMRA/NMCA race in Joliet, IL. Come check it out if any of you guys are in the neighborhood. I will report back with some times.

What day will you be there?

LTWon · 07-31-2016, 12:05 PM

I'm interested to see the results. Looks nice from the pictures.

camarosspower · 08-01-2016, 12:08 PM

https://m.facebook.com/TriangleSpeedShop

Here it is

Ian SS · 08-01-2016, 01:19 PM

More interested in kit pricing and availability rather than times, times are going to vary by location and driver.

Gmanuel · 08-01-2016, 03:56 PM

Quote:

Originally Posted by slo_1ss

More interested in kit pricing and availability rather than times, times are going to vary by location and driver.

+1, except trap speeds would be nice too.

JDCoon · 08-02-2016, 11:50 AM

Thanks guys! We feel like we had a successful weekend with the car. Car ran some great numbers in the heat on pump gas.

11.06 at 127 was our best pass.

We feel the car will run 10s in better air and possibly mid 10s with some more boost.

This kit should come off and go in to production in the next few weeks. We will be looking for a few cars to come and let us install this kit and build a very clear set of installation instructions.

Gmanuel · 08-02-2016, 02:13 PM

Quote:

Originally Posted by JDCoon

Thanks guys! We feel like we had a successful weekend with the car. Car ran some great numbers in the heat on pump gas.

11.06 at 127 was our best pass.

We feel the car will run 10s in better air and possibly mid 10s with some more boost.

This kit should come off and go in to production in the next few weeks. We will be looking for a few cars to come and let us install this kit and build a very clear set of installation instructions.

Nice! Was the 127 trap with the tune that netted 580 on the Mustang dyno? How much boost? Fueling issues? Sorry for all the questions, I'm just really interested in this kit. Trying to decide between this or whipple's kit.

KyleL · 08-03-2016, 03:49 PM

Quote:

Originally Posted by JDCoon

Thanks guys! We feel like we had a successful weekend with the car. Car ran some great numbers in the heat on pump gas.

11.06 at 127 was our best pass.

We feel the car will run 10s in better air and possibly mid 10s with some more boost.

This kit should come off and go in to production in the next few weeks. We will be looking for a few cars to come and let us install this kit and build a very clear set of installation instructions.

I'm not too far from orange, tx. I'd be ok with letting y'all use my car

laynlo15 · 08-07-2016, 07:18 AM

Was that on street tires?

Ian SS · 08-27-2016, 01:44 PM

bump

07-26-2016, 09:48 PM	#31
laynlo15 Drives: 2022 Lt1 A10 Join Date: Nov 2015 Location: clark, mo Posts: 8,860	Good luck JD. Hope it makes some good passes. I'm assuming you'll run it in true street or rumble. Hopefully you'll be at the Holley Fest in Sept. If so I'll see you there __________________ 2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff

08-01-2016, 01:19 PM	#36
Ian SS Drives: 2016 1SS, 2017 JKU Wrangler Join Date: Mar 2016 Location: San Diego Posts: 876 View My Garage	More interested in kit pricing and availability rather than times, times are going to vary by location and driver. __________________ SLO 1SS - sold 1SS MRC NPP 6MT 2018 Ram Rebel 4x4 5.7

08-07-2016, 07:18 AM	#41
laynlo15 Drives: 2022 Lt1 A10 Join Date: Nov 2015 Location: clark, mo Posts: 8,860	Was that on street tires? __________________ 2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff

08-27-2016, 01:44 PM	#42
Ian SS Drives: 2016 1SS, 2017 JKU Wrangler Join Date: Mar 2016 Location: San Diego Posts: 876 View My Garage	bump __________________ SLO 1SS - sold 1SS MRC NPP 6MT 2018 Ram Rebel 4x4 5.7

07-26-2016, 06:02 PM	#30
JDCoon Drives: 2016 Camaro Join Date: Apr 2016 Location: Orange, TX Posts: 10	We will be testing the car this weekend at the NMRA/NMCA race in Joliet, IL. Come check it out if any of you guys are in the neighborhood. I will report back with some times.

07-27-2016, 02:35 PM	#32
Lemosine Drives: 2016 M6 Hyper Blue 2SS Join Date: May 2016 Location: Texas Posts: 221	deff interested in this, nothing beats the sound of a waste gate dump and a turbo spooling.

07-31-2016, 12:05 PM	#34
LTWon Drives: 2016 2ss Join Date: Apr 2016 Location: DFW Posts: 40	I'm interested to see the results. Looks nice from the pictures.

08-01-2016, 12:08 PM	#35
camarosspower Drives: 2010 camaro ss Join Date: Jun 2010 Location: Port Arthur, Tx Posts: 2,383	https://m.facebook.com/TriangleSpeedShop Here it is

08-02-2016, 11:50 AM	#38
JDCoon Drives: 2016 Camaro Join Date: Apr 2016 Location: Orange, TX Posts: 10	Thanks guys! We feel like we had a successful weekend with the car. Car ran some great numbers in the heat on pump gas. 11.06 at 127 was our best pass. We feel the car will run 10s in better air and possibly mid 10s with some more boost. This kit should come off and go in to production in the next few weeks. We will be looking for a few cars to come and let us install this kit and build a very clear set of installation instructions.

User Name		Remember Me?
Password