[gtfoxy]

Usually the up/down controls have been very quick with just a light click. The other day it started taking 2,3 or even 4 presses up or down to get it to change stations. Then it starts working OK, then it will take 2 or three, or more other times during a drive.

It also stopped showing up on my HUD all the time, but shows on my main cluster.

Anyone else experienced this?

[BlakeR]

Have you done the most recent update? Look for it in the settings. Both my camaro and GMC were doing some weird things until I did the update.

[Soon2be 21SS]

My 2018 impala gauge cluster does weird things. Sometimes blacks out, digital speedo readout blanks out. I sure hope gm gets this fixed in new Camaro’s.

[STEVE41]

removed the fused for a few seconds then put it back, it should solved your issue.

[gtfoxy]

Originally Posted by BlakeR

Have you done the most recent update? Look for it in the settings. Both my camaro and GMC were doing some weird things until I did the update.

I’ll have to look into that.

Originally Posted by STEVE41

removed the fused for a few seconds then put it back, it should solved your issue.

With the vehicle off?

[STEVE41]

Originally Posted by gtfoxy

I’ll have to look into that.




With the vehicle off?

yup, the fuse is in the back of the car, you will have to look up the fuse # as i don't recall it, it had been a while when i reset it that way

[gtfoxy]

Haven’t messed with the fuse yet, nor seen an update, but drove it for about an hr & its back to normal.

Weird.