Apex SM10 Gen 5 / 6 18x11 19x11 18x12 19x12 Group Buy - Page 5

kropscamaro16 · 07-30-2021, 12:42 PM

haha yea ill probably be doing 19x11 19x12 but just want to verify the fitment before i actually buy anything

enzia35 · 07-30-2021, 06:37 PM

Still waiting on an email from them...it's literally the last days of July.

weemus · 08-05-2021, 12:04 PM

I had planned on getting larger ZL1/ZLE fenders to fit the 19x12. In additional camber plates would be used to maximize clearance to the strut. The backup plan was Z06 flares on the wider fenders to ensure minimal poke. I was mimicking the 1Lap1LE setup however he did have MCS struts and my plan would all be on the Mag ride struts... Maybe I need to get some 19x11 as a backup plan and run staggered 305/325 until I am sure it will fit.

Just trying to maximize the contact patch.

Quote:

Originally Posted by rotis

The zl1 1le fitment on a SS is tough because of the offset. 18x11 +20'ish is a piece of cake with the MCS setup. Right now in front I run 18x12 +15, I think it's possible to do that and still keep it off the fenders. It'll be tight though.

I am at approximately -3.8deg front and -1.9deg rear camber.

kropscamaro16 · 08-05-2021, 12:14 PM

Quote:

Originally Posted by weemus

I had planned on getting larger ZL1/ZLE fenders to fit the 19x12. In additional camber plates would be used to maximize clearance to the strut. The backup plan was Z06 flares on the wider fenders to ensure minimal poke. I was mimicking the 1Lap1LE setup however he did have MCS struts and my plan would all be on the Mag ride struts... Maybe I need to get some 19x11 as a backup plan and run staggered 305/325 until I am sure it will fit.

Just trying to maximize the contact patch.

i have a 1ss with full spl parts and my mcs kit is on the way so im going to try to see if i can fit oem zl1 1le wheels which pretty sure should fit and then also see if i can borrow some 18 or 19x12 to see if itll fit up front without too much poke since my camber should be around -3.5 or more

enzia35 · 10-03-2021, 10:40 AM

It’s not much but dang they look good.
SM-10 19x10 with 285/35/19 Michelin Pilot Sport 4S. This is the first time I've ever had Michelins. Man they are so nice.

Discount Tire did mention that the stock lug nuts wouldn't work, the socket would hit the wheel.

TLSTWIN · 10-03-2021, 03:32 PM

SM10

Cjw · 11-19-2021, 08:40 AM

Anybody know if the standard open apex lugs will work with stock wheels? I recently picked up a set of stock wheels but they’re inbound in my fathers RV, just checking to see if I need to order lugs beforehand, they look similar just wanting to be safe

enzia35 · 11-19-2021, 11:59 AM

Quote:

Originally Posted by Cjw

Anybody know if the standard open apex lugs will work with stock wheels? I recently picked up a set of stock wheels but they’re inbound in my fathers RV, just checking to see if I need to order lugs beforehand, they look similar just wanting to be safe

If they fit the Apex wheels, then for sure they'll work with stock wheels.

Cjw · 11-19-2021, 12:34 PM

Quote:

Originally Posted by enzia35

If they fit the Apex wheels, then for sure they'll work with stock wheels.

Awesome, thank you for the quick reply

cdrptrks · 11-19-2021, 02:45 PM

Quote:

Originally Posted by enzia35

If they fit the Apex wheels, then for sure they'll work with stock wheels.

Open lug nuts may have a smaller cone seat than the stock closed lug nuts. Check the Apex website or contact them to see what they recommend to make sure you don't end up with this issue:

https://www.camaro6.com/forums/showthread.php?t=591822

07-30-2021, 12:42 PM	#57
kropscamaro16 Drives: 2016 1ss camaro Join Date: Feb 2016 Location: 909 Posts: 9,812	haha yea ill probably be doing 19x11 19x12 but just want to verify the fitment before i actually buy anything __________________ 16 1SS NIGHTFALL GRAY METALLIC WITH NPP #BECAUSERACECAR #SAVETHEMANUALS

07-30-2021, 06:37 PM	#58
enzia35 Drives: '16 Garnet Red 1SS Join Date: Mar 2014 Location: College Station, TX Posts: 3,450	Still waiting on an email from them...it's literally the last days of July. __________________ '16 Camaro 1SS '18 Miata GT Gone: '01 Camaro, '14 Camaro, '90 Miata

10-03-2021, 10:40 AM	#61
enzia35 Drives: '16 Garnet Red 1SS Join Date: Mar 2014 Location: College Station, TX Posts: 3,450	It’s not much but dang they look good. SM-10 19x10 with 285/35/19 Michelin Pilot Sport 4S. This is the first time I've ever had Michelins. Man they are so nice. Discount Tire did mention that the stock lug nuts wouldn't work, the socket would hit the wheel. __________________ '16 Camaro 1SS '18 Miata GT Gone: '01 Camaro, '14 Camaro, '90 Miata Last edited by enzia35; 10-12-2021 at 05:22 PM.

10-03-2021, 03:32 PM	#62
TLSTWIN Romans10:9-13 Drives: /\yes, this is me/\ Join Date: Nov 2008 Location: Vermilion, Ohio Posts: 4,435	mine at NCM SM10 Attached Images __________________

11-19-2021, 08:40 AM	#63
Cjw Drives: 370z, Srt-6 Join Date: Aug 2017 Location: Montgomery Posts: 120	Anybody know if the standard open apex lugs will work with stock wheels? I recently picked up a set of stock wheels but they’re inbound in my fathers RV, just checking to see if I need to order lugs beforehand, they look similar just wanting to be safe

User Name		Remember Me?
Password