06-08-2019, 11:01 AM | #1 |
Drives: '18 5.7 RAM 1500 18' 1SS Join Date: Jun 2009
Location: CA
Posts: 156
|
345....?
cRaZy question:
What would it take to fit a 345 in a SS 1LE ZL1 ZLE?
__________________
JRE Tune
|
06-08-2019, 01:39 PM | #2 |
Drives: Really Fast Join Date: Aug 2017
Location: In The Woods
Posts: 238
|
Fender flares!
__________________
THIS SPACE FOR RENT
|
06-08-2019, 07:32 PM | #3 |
Drives: Fastish Join Date: Jan 2019
Location: Florida
Posts: 228
|
Done it with 18's
https://www.camaro6.com/forums/showthread.php?t=549850 |
06-09-2019, 05:56 PM | #4 | |
Drives: '18 5.7 RAM 1500 18' 1SS Join Date: Jun 2009
Location: CA
Posts: 156
|
Quote:
__________________
JRE Tune
|
|
06-11-2019, 09:33 PM | #5 |
Drives: 18 ZL1 nightfall grey A10 Join Date: Apr 2018
Location: RGV Texas
Posts: 1,527
|
Go by what size wheel and off set you have now and with what size tire? Jack the car and look under it and see what components are closest to the wheel/tire and try and measure the distance between them. This will give you a starting point as to how wide you can go.
|
06-12-2019, 03:14 PM | #6 |
Bannable
|
I have been told by a couple custom wheel manufacturers that a 345 on a 12.5" rim will fit.
__________________
One must forego the self to attain total spiritual creaminess, and avoid the chewy chunks of degradation
2017 ZL1 A10 - Hyper Blue Metallic Rotofab CAI, TM ported TB, AWE non res touring catback with PLP's |
06-12-2019, 04:51 PM | #7 |
ITCRNRS
Drives: 2018 ZL1 1LE Join Date: Jun 2012
Location: Wichita KS
Posts: 1,575
|
Nothing, I am planning on running the 355/30R19 ACR Kumho's on the rear of mine on stock wheels with no mods.
__________________
2018 ZL1 1LE Ordered 6/29/17 Built 11/6/17 Delivered 12/7/17, Summit White, PDR, NAV, https://www.youtube.com/c/tylerpotter
SOLD: 2014 Summit White 1LE 2SS/RS, Recaros, NPP, NAV, KONI Yellow's SOLD: 2012 Black 2LT/RS, Fully 1LE swapped, Brembo swap |
06-12-2019, 05:34 PM | #8 |
Drives: ISO ss 1le Join Date: May 2018
Location: FL
Posts: 764
|
ZLE DSSV struts and spring perch are way way smaller. 18" will not fit unless you grind your strut and and use a spacer. (or have crazy low offsets - like, 0.)
|
04-16-2020, 12:11 PM | #9 |
Dyno Show Queen LOL
Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014
Location: Houston
Posts: 4,345
|
I haven't had an issue with 345 30 19s on zl1 1le replicas 19x11 38mm offsets. I picked up factory rears 19x12 41mm offset is this going to make the tire closer to the harness in drivers side rear fender liner?
__________________
Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber |
04-16-2020, 12:49 PM | #10 |
Drives: 2018 Chevrolet Camaro ZL1 1LE 6MT Join Date: Jun 2019
Location: Scottsdale, Arizona
Posts: 89
|
How did these fit? good grip? Im at 750/750 RW and need more traction!
__________________
2018 ZL1-1LE
Rotofab, Ported TB, 2.3 Pulley, ATI balancer w DSX 9.06 Lower ring, LME heads, 2" Kooks, custom cam, DOD Delete, Cordes Low side fuel system, Flex Fuel Kit, MM Catch can, ZL1 addons tow hook, ZL1 addons rock gaurds, Diode dynamics blacked out side markers |
04-16-2020, 02:31 PM | #11 |
Dyno Show Queen LOL
Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014
Location: Houston
Posts: 4,345
|
Just fine the Tire over hung the rim a little but the grip is awesome
__________________
Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber |
04-16-2020, 02:35 PM | #12 |
Drives: 2018 Chevrolet Camaro ZL1 1LE 6MT Join Date: Jun 2019
Location: Scottsdale, Arizona
Posts: 89
|
Any pictures of the overhang?
__________________
2018 ZL1-1LE
Rotofab, Ported TB, 2.3 Pulley, ATI balancer w DSX 9.06 Lower ring, LME heads, 2" Kooks, custom cam, DOD Delete, Cordes Low side fuel system, Flex Fuel Kit, MM Catch can, ZL1 addons tow hook, ZL1 addons rock gaurds, Diode dynamics blacked out side markers |
04-16-2020, 02:54 PM | #13 |
Dyno Show Queen LOL
Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014
Location: Houston
Posts: 4,345
|
Here's a 325 vs 345
__________________
Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber |
04-16-2020, 03:14 PM | #14 |
Drives: 2018 Chevrolet Camaro ZL1 1LE 6MT Join Date: Jun 2019
Location: Scottsdale, Arizona
Posts: 89
|
Awesome! are these 355 or 345? also are these the 888Rs?
__________________
2018 ZL1-1LE
Rotofab, Ported TB, 2.3 Pulley, ATI balancer w DSX 9.06 Lower ring, LME heads, 2" Kooks, custom cam, DOD Delete, Cordes Low side fuel system, Flex Fuel Kit, MM Catch can, ZL1 addons tow hook, ZL1 addons rock gaurds, Diode dynamics blacked out side markers |
|
|
Post Reply
|
|
|