Dash trim

motownsax · 11-09-2018, 09:09 AM

I will try to explain this best I can. If you look at the dash there is a trim piece that I have circled. I noticed when the sun hit that trim just right I saw some vertical(Up and down) wave or indentation along the trim. If you run your finger along this piece you can feel a bit of indentations sporadic similar to the yellow markings. I looked at other cars and appears to be normal. Has anyone else noticed this or confirm this??
THXXXXXXXXXXXXXXXXX

Eos · 11-09-2018, 10:24 AM

Hi!,
I haven't noticed it on my 2017.. but I think you have noticed the plastic molding machine signs left during the ignition procedure..

See you!!,
Eos

squish72 · 11-09-2018, 10:26 AM

Mine is like that too. Only has one dent in it though. I ordered a new trim pannel after a freak 6 pack of beer incident that scratched it and the glovebox.

Haven't had the time to install the new one yet but it doesn't have the dents in it.

Camaro_QC · 11-09-2018, 10:52 AM

I second the plastic molding process. Happens more often than you think.

I haven't noticed on mine but I'm sure they're there.

motownsax · 11-09-2018, 12:05 PM

What is that piece called. It looks like you have to take alot of the dash apart.
THXXXXXXXXX

squish72 · 11-10-2018, 06:18 AM

GM (84225815). It is a fairly large job

motownsax · 11-10-2018, 07:28 AM

THXXXXXXXXXXX

11-09-2018, 09:09 AM	#1
motownsax Drives: 18 Black 1LT Join Date: Oct 2018 Location: Phoenix Posts: 5	Dash trim I will try to explain this best I can. If you look at the dash there is a trim piece that I have circled. I noticed when the sun hit that trim just right I saw some vertical(Up and down) wave or indentation along the trim. If you run your finger along this piece you can feel a bit of indentations sporadic similar to the yellow markings. I looked at other cars and appears to be normal. Has anyone else noticed this or confirm this?? THXXXXXXXXXXXXXXXXX Attached Images Last edited by motownsax; 11-09-2018 at 12:24 PM.

11-09-2018, 10:52 AM	#4
Camaro_QC Drives: 08 Tiburon GS, 2018 Camaro 2.0T Join Date: Sep 2017 Location: Québec Posts: 1,660	I second the plastic molding process. Happens more often than you think. I haven't noticed on mine but I'm sure they're there. __________________ 2018 Camaro LS \| 6 spd \| 2.0L turbo \| Nightfall Grey \| RS package \| Technology Package. --------------------- Order WDGHKX 1100 - 5/08/2018 \| 3800 - 6/18/2018 2000 - 5/09/2018 \| 4200 - 6/21/2018 3000 - 5/28/2018 \| 5000 - 6/27/2018 6000 - 6/29/2018

11-09-2018, 10:24 AM	#2
Eos Drives: Camaro Coupé 2.0T AT8 (EU version) Join Date: Mar 2016 Location: Milan, Italy Posts: 316 View My Garage	Hi!, I haven't noticed it on my 2017.. but I think you have noticed the plastic molding machine signs left during the ignition procedure.. See you!!, Eos

11-09-2018, 10:26 AM	#3
squish72 Drives: 2016 2SS 8AT Join Date: May 2018 Location: Nevada Posts: 358	Mine is like that too. Only has one dent in it though. I ordered a new trim pannel after a freak 6 pack of beer incident that scratched it and the glovebox. Haven't had the time to install the new one yet but it doesn't have the dents in it.

11-09-2018, 12:05 PM	#5
motownsax Drives: 18 Black 1LT Join Date: Oct 2018 Location: Phoenix Posts: 5	What is that piece called. It looks like you have to take alot of the dash apart. THXXXXXXXXX

11-10-2018, 06:18 AM	#6
squish72 Drives: 2016 2SS 8AT Join Date: May 2018 Location: Nevada Posts: 358	GM (84225815). It is a fairly large job

11-10-2018, 07:28 AM	#7
motownsax Drives: 18 Black 1LT Join Date: Oct 2018 Location: Phoenix Posts: 5	THXXXXXXXXXXX

User Name		Remember Me?
Password