10-12-2020, 10:39 AM | #15 |
Drives: 2016 1ss camaro Join Date: Feb 2016
Location: 909
Posts: 9,817
|
ordered them monday from vivid received them saturday good stuff! gonna get them installed this weekend
__________________
16 1SS NIGHTFALL GRAY METALLIC WITH NPP #BECAUSERACECAR #SAVETHEMANUALS
|
10-17-2020, 12:42 PM | #16 |
Drives: HBM ZLE Join Date: Aug 2017
Location: In the garage
Posts: 802
|
I wonder if they sold out? Not seeing them on the vivid racing website anymore
|
10-19-2020, 10:54 AM | #17 |
Drives: 2016 1ss camaro Join Date: Feb 2016
Location: 909
Posts: 9,817
|
hmm im not sure shoot them an email!
__________________
16 1SS NIGHTFALL GRAY METALLIC WITH NPP #BECAUSERACECAR #SAVETHEMANUALS
|
10-25-2020, 07:42 AM | #18 | |
|
Quote:
https://www.vividracing.com/spl-susp...&class_9=42304 |
|
10-28-2020, 06:27 PM | #19 |
Drives: HBM ZLE Join Date: Aug 2017
Location: In the garage
Posts: 802
|
Thanks Carguy! Now I found em haha
|
10-28-2020, 06:39 PM | #20 |
Drives: 2016 1ss camaro Join Date: Feb 2016
Location: 909
Posts: 9,817
|
__________________
16 1SS NIGHTFALL GRAY METALLIC WITH NPP #BECAUSERACECAR #SAVETHEMANUALS
|
10-29-2020, 08:06 AM | #21 | |
Drives: 2019 SS 1LE Join Date: Jun 2018
Location: Louisville, KY
Posts: 95
|
Quote:
|
|
11-11-2020, 01:07 PM | #22 |
Drives: 2016 1ss camaro Join Date: Feb 2016
Location: 909
Posts: 9,817
|
turner told me this would be next
The front lower control arms would be great because you would be able to fix your roll center after being lowered. The tension rod would compliment that well, as you would be eliminating the big bushing up front and getting camber and castor what do you guys think? https://www.splparts.com/products/front-lower-control-arms-chevrolet-camaro-gen6.html https://www.splparts.com/products/front-tension-rods-chevrolet-camaro-gen6.html
__________________
16 1SS NIGHTFALL GRAY METALLIC WITH NPP #BECAUSERACECAR #SAVETHEMANUALS
|
11-11-2020, 04:51 PM | #23 | |
Drives: Chevrolet SS 1LE Join Date: Oct 2019
Location: St. Charles, MO
Posts: 1,446
|
Quote:
__________________
Matt Miller
2020 SS 1LE |
|
11-11-2020, 05:00 PM | #24 |
Drives: 2016 1ss camaro Join Date: Feb 2016
Location: 909
Posts: 9,817
|
yea i dont have camber plates that is another next part option for me im only at -2.2 front -1.5 rear want to get to at least 2.5 front 1.5-2.0 rear
i am lowered and i am only a 1ss not a 1le so i need all the help i can haha and yea i would probably do one at a time i would love to do the whole setup but thats alot of $$
__________________
16 1SS NIGHTFALL GRAY METALLIC WITH NPP #BECAUSERACECAR #SAVETHEMANUALS
|
11-11-2020, 08:23 PM | #25 |
|
Well there is the strut mod that Provost documented that will get you to -3.0 or more in front without any parts. -1.9 to -2.0 in rear is doable stock.
|
11-11-2020, 09:35 PM | #26 |
Drives: Chevrolet SS 1LE Join Date: Oct 2019
Location: St. Charles, MO
Posts: 1,446
|
The nice thing about the Vorshlag plates is that they let you run a lot of camber at a track or autocross event and then instantly and repeatably dial it out for street driving. Also, they replace one big rubber bushing with a big spherical joint. If it were me, that would be way higher on my priority list than those SPL front arms, because they'll gain you the same major speed advantage (camber and caster) for 42% of the price and allow you quick and easy changes between street and track settings.
The roll center change is an interesting idea, but I question whether it's really important. After all, Chevy already lowers the 1LE compared to your SS and they don't change the front-view geometry at all to account for it (as far as I know, anyway). You might go a bit lower than that, but I doubt it's a major change. And frankly, high roll centers have their own issues and most dedicated race cars aim for RCs near ground level (except some aero-compromised cars like modern F1 cars that sacrifice suspension geometry for best aero). I'd encourage you to do the measurements and calculate your RC: as long as it's not below ground level, it probably isn't an issue.
__________________
Matt Miller
2020 SS 1LE |
11-12-2020, 10:31 AM | #27 |
Drives: 2016 1ss camaro Join Date: Feb 2016
Location: 909
Posts: 9,817
|
yea only thing im worried about is i dont have oem struts so not sure if the vorshlag camber plates will work without testing
__________________
16 1SS NIGHTFALL GRAY METALLIC WITH NPP #BECAUSERACECAR #SAVETHEMANUALS
|
11-12-2020, 12:31 PM | #28 |
Drives: 2020 Chevy Camaro Join Date: Oct 2019
Location: Quebec
Posts: 74
|
I have KW shocks and Ground Control camber plate and the only change from one shock to the other is the sleeve at that top that holds the shock in the bearing. i would suppose with the right adaptor you should be able to use the Vorshlag also.
|
|
|
Post Reply
|
|
|