[The Specialist]

2018 SS 1LE with PDR.
Just received my RV mirror mount from Blendmount for my V1 Radar detector.
I have the power cord \ tap to try and grab some power.
The RV mirror is out.
There is no power coming out of there to tap.
How about the PDR Camera?
The Camera housing affixed to the top of the windshield.
Has anyone with a PDR tapped and broken into this box and found current for your Radar Detector?

[StPeteHyper2.0]

Tap into the power for the passenger seat belt light. Black for ground, voilet/white for 12v

[StPeteHyper2.0]

I spliced it and works just fine.

[The Specialist]

Passenger seat belt light? Up in the headliner where your map lights are?

[carguy55]

These guys make kits that might work

www.gen5diy.com

[Emoto]

Here's a whole thread on how to do it: https://www.camaro6.com/forums/showthread.php?t=440254

[StPeteHyper2.0]

Originally Posted by The Specialist

Passenger seat belt light? Up in the headliner where your map lights are?

Originally Posted by Emoto

Here's a whole thread on how to do it: https://www.camaro6.com/forums/showthread.php?t=440254

This thread helped me out. I also have wiring diagrams. On the diagram it is labeled violet/white rather than purple/white. And honestly the white is more of a dingy yellow. But it is the only striped wire in that cluster. The other 3 wires only activate when passengers are in the chair or not. The actual passenger seat belt light is always on and gets constant 12v. The on / off light are sensor activated by the seat.