Oem style plug

20Bluezl1 · 08-03-2020, 01:45 PM

So i have a little ocd and I really dont like cutting into the electrical harness. I need to pull power from the accessory plug. Does anyone know where I can get the plug in the picture so I can make my own pigtail harness?

LiqTenExp · 08-03-2020, 01:49 PM

Is there a manufacture or P/N on it? I found all the connectors and pins online when I did my JMS FuelMax. Perhaps someone with an electrical schematic with BOM might be able to get you a quicker answer.

20Bluezl1 · 08-03-2020, 02:01 PM

Quote:

Originally Posted by LiqTenExp

Is there a manufacture or P/N on it? I found all the connectors and pins online when I did my JMS FuelMax. Perhaps someone with an electrical schematic with BOM might be able to get you a quicker answer.

I just found these numbers PBT-GF15<M-11. What site did you purchase the connectors from?

20Bluezl1 · 08-03-2020, 07:16 PM

Anyone have any ideas where to find oem plugs?

LiqTenExp · 08-03-2020, 07:53 PM

PBT-GF15 is the type of plastic

Is there no other name/info on it?

20Bluezl1 · 08-03-2020, 08:38 PM

Quote:

Originally Posted by LiqTenExp

PBT-GF15 is the type of plastic

Is there no other name/info on it?

Thats is all that is marked, I've been searching and still nothing. There has to be a way to buy that plug.

FrostZ · 08-03-2020, 09:29 PM

I’ve had great luck with mouser electronics to buy the plugs as I bought some for a headlight project. They seem to stock anything you could need although it maybe a project trying to find the correct part number in this case as none are visible. Good luck!

20Bluezl1 · 08-03-2020, 09:35 PM

I believe I found it, made by Ford Motorcraft

Its about $30 really expensive now i need to find the male end.

I think I'm going to have ro risk it and try and see if its the correct one.

20Bluezl1 · 08-03-2020, 10:29 PM

So looks like ACDelco makes it also part# PT2604 but now the issue is I can't find a male end.

ZLE dude · 08-04-2020, 06:47 AM

So far in my searching it appears that this connector is what connects to a 12V power receptacle (cigarette lighter). Can't currently find anything other than that so far...
http://https://www.amazon.com/ACDelc.../dp/B004NQ940Y

http://https://www.gmpartsdirect.com...utlet-25774623

DFW_Muscle · 08-04-2020, 08:11 AM

Ballenger Motorsports may be able to source it for you if you email them a picture of it. However, I could not find this connector on their site.

Nothing like an SS · 08-04-2020, 08:53 AM

The OEM for the connectors (both male and female) is Molex. They are resold under brands for each auto manufacturer.

I am not sure if Molex sells to the public (we do business with them at my company as we make electronics) but if you find the part on their website, Digi Key, Mouser etc. should have it for purchase.

20Bluezl1 · 08-04-2020, 10:48 AM

Quote:

Originally Posted by Nothing like an SS

The OEM for the connectors (both male and female) is Molex. They are resold under brands for each auto manufacturer.

I am not sure if Molex sells to the public (we do business with them at my company as we make electronics) but if you find the part on their website, Digi Key, Mouser etc. should have it for purchase.

No luck with Digi Key or Mouser but thank you I appreciate your help.

08-03-2020, 01:45 PM	#1
20Bluezl1 Drives: 2020 Zl1 A10 Riverside Blue Join Date: Mar 2020 Location: NJ Posts: 1,219	Oem style plug So i have a little ocd and I really dont like cutting into the electrical harness. I need to pull power from the accessory plug. Does anyone know where I can get the plug in the picture so I can make my own pigtail harness? Attached Images

08-03-2020, 01:49 PM	#2
LiqTenExp Drives: 2017 ZL1 Join Date: Jan 2017 Location: NJ Posts: 905	Is there a manufacture or P/N on it? I found all the connectors and pins online when I did my JMS FuelMax. Perhaps someone with an electrical schematic with BOM might be able to get you a quicker answer. __________________ 2017 Camaro ZL1 Coupe M6 (847whp Dynojet on 93)

08-03-2020, 07:53 PM	#5
LiqTenExp Drives: 2017 ZL1 Join Date: Jan 2017 Location: NJ Posts: 905	PBT-GF15 is the type of plastic Is there no other name/info on it? __________________ 2017 Camaro ZL1 Coupe M6 (847whp Dynojet on 93)

08-03-2020, 09:29 PM	#7
FrostZ Drives: 2019 A10 ZL1 Join Date: Mar 2020 Location: Massachusetts Posts: 135 View My Garage	I’ve had great luck with mouser electronics to buy the plugs as I bought some for a headlight project. They seem to stock anything you could need although it maybe a project trying to find the correct part number in this case as none are visible. Good luck! __________________ Morimoto Headlights, AWE Touring Catback, MM Catch Can, ADM V2 Reservoir, Roto-Fab, C&R Oil Cooler, 1LE Grills

08-03-2020, 09:35 PM	#8
20Bluezl1 Drives: 2020 Zl1 A10 Riverside Blue Join Date: Mar 2020 Location: NJ Posts: 1,219	I believe I found it, made by Ford Motorcraft Its about $30 really expensive now i need to find the male end. I think I'm going to have ro risk it and try and see if its the correct one. Attached Images Last edited by 20Bluezl1; 08-03-2020 at 09:57 PM.

08-03-2020, 07:16 PM	#4
20Bluezl1 Drives: 2020 Zl1 A10 Riverside Blue Join Date: Mar 2020 Location: NJ Posts: 1,219	Anyone have any ideas where to find oem plugs?

08-03-2020, 10:29 PM	#9
20Bluezl1 Drives: 2020 Zl1 A10 Riverside Blue Join Date: Mar 2020 Location: NJ Posts: 1,219	So looks like ACDelco makes it also part# PT2604 but now the issue is I can't find a male end. Last edited by 20Bluezl1; 08-04-2020 at 07:05 PM.

08-04-2020, 06:47 AM	#10
ZLE dude Drives: '18 ZL1 1LE Join Date: May 2020 Location: KY Posts: 219	So far in my searching it appears that this connector is what connects to a 12V power receptacle (cigarette lighter). Can't currently find anything other than that so far... http://https://www.amazon.com/ACDelc.../dp/B004NQ940Y http://https://www.gmpartsdirect.com...utlet-25774623 __________________ 2018 ZL1 1LE - Summit White, PDR, Rotofab CAI, 95mm TB, CSP 2" catless LT's, JMS Voltage Booster, AEM X-series WB, DSX flex fuel sensor, Banks Data Monster, Tuned by Ted Jannetty, 5% Tint, Blackvue DR900S-2CH, Diode Dynamics lighting, IGL Kenzo ceramic coating

08-04-2020, 08:11 AM	#11
DFW_Muscle Drives: 2018 Chevrolet Camaro ZL1 Join Date: Jun 2018 Location: DFW Posts: 199	Ballenger Motorsports may be able to source it for you if you email them a picture of it. However, I could not find this connector on their site.

08-04-2020, 08:53 AM	#12
Nothing like an SS Faster!!! Drives: 2020 Camaro 1SS 1LE Join Date: Mar 2020 Location: Long Island NY Posts: 991	The OEM for the connectors (both male and female) is Molex. They are resold under brands for each auto manufacturer. I am not sure if Molex sells to the public (we do business with them at my company as we make electronics) but if you find the part on their website, Digi Key, Mouser etc. should have it for purchase.

User Name		Remember Me?
Password