11-18-2009, 05:44 PM | #1 |
Drives: Ewa (pronounced Eva) Join Date: Nov 2009
Location: Hendersonville, TN
Posts: 17
|
Door sill plates, UPDATED
Hey guys,
I've ordered the factory door sill plates for Ewa, they should arrive tomorrow. Does anyone have any intructions of how to install. My sister owned a detailing shop for years, was a God at this type of stuff, and said she'd help, but I kind of want to show her that I can do it. Any help? Thanks!
__________________
My car's name is Ewa (pronounced Eva), she's polish.
Last edited by mrdean3; 11-20-2009 at 01:48 AM. |
11-18-2009, 06:06 PM | #2 |
Drives: 05/07 Chevy's Join Date: Aug 2009
Location: Florida
Posts: 392
|
They will (should) come with instructons along with a templet .
|
11-18-2009, 06:10 PM | #3 |
Drives: Ewa (pronounced Eva) Join Date: Nov 2009
Location: Hendersonville, TN
Posts: 17
|
Even if you didn't order them directly from GM?
__________________
My car's name is Ewa (pronounced Eva), she's polish.
|
11-18-2009, 06:13 PM | #4 |
Drives: 05/07 Chevy's Join Date: Aug 2009
Location: Florida
Posts: 392
|
Well if they are OEM and are still in the OEM package there should be instuctions and a templet in the box. Now depending on when they were packaged I know the very early ones didn't have the templet but did have instructions. I have the measurements at work but I'm away from work till Monday or I would give them to you just incase :(, sorry.
|
11-18-2009, 06:15 PM | #5 |
Drives: Ewa (pronounced Eva) Join Date: Nov 2009
Location: Hendersonville, TN
Posts: 17
|
If the template's not in there, I'll just go on here and ask if anyone can give 'em to me.
__________________
My car's name is Ewa (pronounced Eva), she's polish.
|
11-18-2009, 06:29 PM | #6 |
Retired but not done!
Drives: '66 Impala '06 HHR '03 FJR1300 Join Date: Apr 2009
Location: Oshawa
Posts: 400
|
First of all make sure the area you are going to put them is clean! Wipe the area with Rubbing Alcohol. You want to make sure you get any and all wax off the sil. If you don't get a template then wander over to the Dealer and ask to look at the sils of an optioned car.
Good luck. You only get one chance to stick it. Rob
__________________
Disclaimer:Anything posted by me "the Mole" is my own opinions and thoughts , and don't necessarily represent the positions,strategies or opinions of GM.
This is where I've ridden my bike. |
11-18-2009, 07:13 PM | #7 |
2010 SIM Beige RS 6M
Drives: SIM RS 6M 66 Corvair Silverado LTZ Join Date: Oct 2008
Location: Kamloops,British Columbia
Posts: 4,677
|
One chance is right. Keep it back from the edge.
__________________
CAMARO.. 2010 The Heart Beat is back in CHEVROLET
Now let's put it back in America |
11-18-2009, 07:14 PM | #8 |
Drives: Ewa (pronounced Eva) Join Date: Nov 2009
Location: Hendersonville, TN
Posts: 17
|
Well the good thing is, my Dad has a 2SS Camaro, so my comparison is beside Ewa.
__________________
My car's name is Ewa (pronounced Eva), she's polish.
|
11-18-2009, 08:05 PM | #9 |
Drives: 05/07 Chevy's Join Date: Aug 2009
Location: Florida
Posts: 392
|
|
11-19-2009, 02:28 AM | #10 |
Drives: Ewa (pronounced Eva) Join Date: Nov 2009
Location: Hendersonville, TN
Posts: 17
|
I'm pretty sure they'll be at my office tomorrow, so I'll pick 'em up, and I'll let y'all know.
So you say rub it down with rubbing alcohol? That won't do anything to the paint?
__________________
My car's name is Ewa (pronounced Eva), she's polish.
|
11-19-2009, 08:38 AM | #11 |
#TeamBeckyD
Drives: 2017 HBM 2SS Convertible A8 Join Date: Aug 2008
Location: Apopka, FL
Posts: 10,496
|
My dealership gave me a set when I purchased the car. Inside of the box was the following.
-2 Door sills (drivers & passengers side) -2 cleaning wipes w/ adhesive on them to help the sills stick -1 set of instructions What I did is I sat in the car placed the door sill on the area it goes adjusted it to the location I waned it. I marked off the area with blue painters tape cleaned the area with the provided door sill cleaner/adhesive I removed the back clear film off the back of and place the door sill on the sill of the car. Super east Sean
__________________
#TeamBeckyD
**FIFTY HBM 2SS VERT** |
11-20-2009, 01:47 AM | #12 |
Drives: Ewa (pronounced Eva) Join Date: Nov 2009
Location: Hendersonville, TN
Posts: 17
|
I did it, and it was the scariest moment of my life. I'm really good with stuff like this, but this scared the hell out of me. It's looks good. The angle on my side - driver's - is a tiny, tiny, tiny bit off, but it's good. My heart is relaxing now.
__________________
My car's name is Ewa (pronounced Eva), she's polish.
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
New Product! Camaro SS or RS Stainless Steel Door Sill Plates (Scuff Plates) | RPI Designs | Cosmetics and Lighting Modification Discussions | 17 | 07-31-2020 07:28 AM |
New from RPI Designs! Camaro engraved Billet Chrome & Billet Black Door Sill Plates! | RPI Designs | Interior Parts & Accessories | 14 | 03-01-2017 07:24 AM |
New Product! Camaro SS or RS Stainless Steel Door Sill Plates (Scuff Plates) | RPI Designs | Exterior Parts & Accessories | 4 | 03-01-2010 05:30 PM |
7-characters NEWTEXAS LICENSE PLATES | Chrisrp454 | USA - Texas | 52 | 12-02-2009 03:58 PM |
Chicago License Plates | lawdog | USA - Great Lakes | 10 | 10-27-2009 07:28 PM |