Anvil Rear Notch Spoiler 6th Gen Test Fit! - Page 3

ajp · 04-03-2020, 10:01 AM

Quote:

Originally Posted by ChadFarr

Does your AM/FM Radio still work?

I had the am/fm wires moved to the trunk when I installed my previous spoiler.

Not sure if it still works, I don't use the radio.

I'll check once I get my car back...getting the mirror wrap fixed today.

ChadFarr · 04-03-2020, 10:12 AM

Quote:

Originally Posted by ajp

I had the am/fm wires moved to the trunk when I installed my previous spoiler.

Not sure if it still works, I don't use the radio.

I'll check once I get my car back...getting the mirror wrap fixed today.

Yeah, I don’t use the radio much either but I’d prefer to keep it. What spoiler did you have before? I had the high wing for a while.

ajp · 04-03-2020, 10:21 AM

Quote:

Originally Posted by ChadFarr

Yeah, I don’t use the radio much either but I’d prefer to keep it. What spoiler did you have before? I had the high wing for a while.

I had the IROC-Z 3 piece spoiler. On a side note, I wish I had pulled the trigger on your wheels last year

ChadFarr · 04-03-2020, 10:42 AM

Quote:

Originally Posted by ajp

I had the IROC-Z 3 piece spoiler. On a side note, I wish I had pulled the trigger on your wheels last year

Oh, I wanted that spoiler too. I guess the quality isn’t as good as the new one?

I kinda regret selling my ole wheels. I would’ve just powder coated them black and been okay.

ajp · 04-03-2020, 10:51 AM

Quote:

Originally Posted by ChadFarr

Oh, I wanted that spoiler too. I guess the quality isn’t as good as the new one?

I kinda regret selling my ole wheels. I would’ve just powder coated them black and been okay.

The IROC spoiler cost $300 to prep and paint (that was after a courtesy discount between my wrap guy and the paint shop), it was pretty bad in its raw form.

Once it was painted, it looked good, but was too aggressive for the Convertible lines IMO. Also, the end pieces have to be attached with 3M tape, I was worried attaching them to my wrap wouldn't hold, and it looked incomplete without them.

ChadFarr · 04-03-2020, 11:48 AM

Quote:

Originally Posted by ajp

The IROC spoiler cost $300 to prep and paint (that was after a courtesy discount between my wrap guy and the paint shop), it was pretty bad in its raw form.

Once it was painted, it looked good, but was too aggressive for the Convertible lines IMO. Also, the end pieces have to be attached with 3M tape, I was worried attaching them to my wrap wouldn't hold, and it looked incomplete without them.

Thanks! You pretty much hit my concerns on the head with the Iroc spoiler. I’m glad I didn’t pull the trigger on that.

I’ve you’re considering any performance for the Vert. Join our Facebook group:

https://www.facebook.com/groups/9109...128/?ref=share

Haole · 07-24-2020, 06:31 PM

Do you still need to order this spoiler in advance

kropscamaro16 · 07-24-2020, 06:34 PM

yes shoot them email storm@anvilauto.com

Haole · 07-25-2020, 11:51 AM

Quote:

Originally Posted by kropscamaro16

yes shoot them email storm@anvilauto.com

Just a quick post. Storm is no longer with anvil apparently. He did give me another email to contact them and their number to call directly.

Also I have seen install videos from Matt (lethal garage) it doe not seem to be difficut, what would those of you that have this spoiler say the install is?
Shipping to Hawaii came out to about $103 not too bad i feel.

ajp · 07-25-2020, 01:22 PM

"Fit like a glove" per my installer.

Quote:

Originally Posted by Haole

Just a quick post. Storm is no longer with anvil apparently. He did give me another email to contact them and their number to call directly.

Also I have seen install videos from Matt (lethal garage) it doe not seem to be difficut, what would those of you that have this spoiler say the install is?
Shipping to Hawaii came out to about $103 not too bad i feel.

Haole · 09-24-2020, 10:14 PM

Well I got it today and installed it. I love it. My only problem (i guess i just need to fit it a bit better) is the center hole can be seen due to the spoiler not sitting flush on the trunk.

NowaChevyGuy · 09-24-2020, 11:12 PM

When I installed mine I didn't even use the center bolt because it's such a pain in the ass to get to. I used the two outer bolts and used 3M double-sided tape along the front and rear edges on the inner lip to where it wasn't totally seen. by doing that and pressing down the center working it out towards the outer edge and then tightening the outer edge bolts it stayed on super tight and flush. Looks great had it on for over a year.

Haole · 09-24-2020, 11:25 PM

Ok I will admit my stupidity, I didn't see the spoiler came with bolts threaded all the way up on the existing screws. I took them out ( thank God no damage to trunk with them being on still) now finishing up and perfect fit.

I do agree the center one is a pain but I got it in.

NowaChevyGuy · 09-24-2020, 11:56 PM

After a year on

07-24-2020, 06:34 PM	#36
kropscamaro16 Drives: 2016 1ss camaro Join Date: Feb 2016 Location: 909 Posts: 9,812	yes shoot them email storm@anvilauto.com __________________ 16 1SS NIGHTFALL GRAY METALLIC WITH NPP #BECAUSERACECAR #SAVETHEMANUALS

09-24-2020, 10:14 PM	#39
Haole 2017 SS Drives: 2017 Summit White 2SS Join Date: Feb 2009 Location: Hawaii Posts: 1,362 View My Garage	Well I got it today and installed it. I love it. My only problem (i guess i just need to fit it a bit better) is the center hole can be seen due to the spoiler not sitting flush on the trunk. Attached Images

09-24-2020, 11:12 PM	#40
NowaChevyGuy Drives: 2016 Camaro LT1 RS Black on Black Join Date: Apr 2017 Location: San Bernardino, CA Posts: 269	When I installed mine I didn't even use the center bolt because it's such a pain in the ass to get to. I used the two outer bolts and used 3M double-sided tape along the front and rear edges on the inner lip to where it wasn't totally seen. by doing that and pressing down the center working it out towards the outer edge and then tightening the outer edge bolts it stayed on super tight and flush. Looks great had it on for over a year. __________________ . NowAChevyGuy 2016 RS - Trifecta Tuned, 3.23 diff swap, Borla S Type, JMS Throttle Controller, Lambo doors, Monster stereo, GM LED rear tail lights, BMR swaybars/End Links/Trailing Arms, tinted dark and murdered out.[/br] Car kicks ass! $20k.. and I get 20mpg with my foot in it, everywhere I go!.... Say somethin about V6's now...

09-24-2020, 11:25 PM	#41
Haole 2017 SS Drives: 2017 Summit White 2SS Join Date: Feb 2009 Location: Hawaii Posts: 1,362 View My Garage	Ok I will admit my stupidity, I didn't see the spoiler came with bolts threaded all the way up on the existing screws. I took them out ( thank God no damage to trunk with them being on still) now finishing up and perfect fit. I do agree the center one is a pain but I got it in. Last edited by Haole; 09-25-2020 at 12:37 AM.

09-24-2020, 11:56 PM	#42
NowaChevyGuy Drives: 2016 Camaro LT1 RS Black on Black Join Date: Apr 2017 Location: San Bernardino, CA Posts: 269	Pics After a year on Attached Images __________________ . NowAChevyGuy 2016 RS - Trifecta Tuned, 3.23 diff swap, Borla S Type, JMS Throttle Controller, Lambo doors, Monster stereo, GM LED rear tail lights, BMR swaybars/End Links/Trailing Arms, tinted dark and murdered out.[/br] Car kicks ass! $20k.. and I get 20mpg with my foot in it, everywhere I go!.... Say somethin about V6's now... Last edited by NowaChevyGuy; 09-24-2020 at 11:58 PM. Reason: Upside-down pic

07-24-2020, 06:31 PM	#35
Haole 2017 SS Drives: 2017 Summit White 2SS Join Date: Feb 2009 Location: Hawaii Posts: 1,362 View My Garage	Do you still need to order this spoiler in advance

User Name		Remember Me?
Password