Need Help Finding ARP wheel Studs

sr71bb · 03-07-2022, 04:47 PM

Well it appears there is a SHORTAGE of ARP fasteners specifically wheel studs. I need some help trying to find some in stock NOW so that I can replace a broken Wheel Stud .

Part number is ARP 100-7736. Those studs are HALF inch LONGER than normal. I need 10 for the fronts. I thought maybe one of you track rats might have a set or two you kept as SPARES???? lol

Tried all typical sources like Summit but NO LUCK As a last resort I guess I can go back to the GM parts bin for stock studs.

THANKS!!!

Trochoidal · 03-07-2022, 05:41 PM

Did you try RDP?

https://www.rdpstore.com/p-10461-whe...-100-7736.aspx

Maybe 7737 if you don’t mind the 1” length.

MSI in NC might be worth calling too.

SDF62 · 03-07-2022, 05:52 PM

Jegs looks like they have some....I have also bought some from Katech in the past.

DaveC113 · 03-07-2022, 05:55 PM

Hey, I have a set of these. I used them for a season, cut the "nose" off so closed lugnuts fit. I wasn't really considering letting them go but if you can't find them new I'll sell you mine.

sr71bb · 03-07-2022, 10:14 PM

Well JEGS lets you put them in your CART and I called them and they said they are not in stock now LOL

RDPSTORE might be a possibility

THANKS for the iNFO

That1guy_tim · 03-08-2022, 07:18 AM

Get truck studs off of RockAuto they are like 2 bucks a piece.

sr71bb · 03-08-2022, 08:51 AM

Quote:

Originally Posted by That1guy_tim

Get truck studs off of RockAuto they are like 2 bucks a piece.

Good tip Thanks. My guess is though if that are not any stronger than the stock studs.

The RDPSTORE and JEGS BOTH dont have ARP in stock. I decided just to replace the TWO front wheel hubs that come with bearing and wheel studs.

Part number on that is 13512895. Price on that is about 80.00 x 2. I will post back with the DIY install time on these. It DOES NOT require the removal of the spindle.

Katech_Zach · 03-08-2022, 10:12 AM

I have dorman heavy duty truck studs, 12mm longer than stock, but 19mm more useable threads (not as big of a lead). I'd give them to you for cheap (set of 10), leftover from my 5th gen camaro project I sold. I had 20, and used 10 for the front only.

PM me if youre interested, they'd get you by if you were open to running those over the ARP

ICTsccaCamaro · 03-08-2022, 08:53 PM

Like others have said see if you can get the 1in longer ones, I'm running them in the front and .5in in the rear.

sr71bb · 03-09-2022, 09:18 AM

For the time being, I replaced BOTH my front hubs with new ones and those come with NEW studs. It takes about an hour per side to do that. INSTALLATION TIP. Initially I had ALL kinds of issues with having enough clearance to take TWO of the THREE bolts out of the HUB assembly because of clearance issues with the suspension.

I finally wrestled ONE of the TWO bolts out but COULD NOT get the lower bolt out that is closest to the FRONT of the car. I then remembered that since I run -3.6 degrees camber, THAT brings the suspension components CLOSER in to the head of the bolt (3 - 15MM by the way). SO.....I changed the camber to ALL the way POSITIVE and that provided enough clearance to be able to pull the bolts out.

I took this route because I had the ORIGINAL front bearing assembly and with all the heat I generate with slicks and DTC70 pads on a ZL1 set up, it certainly can affect the perfomance of the wheel bearing over time.

I ordered a set of 100-7736 ARP wheel studs and they are about a month out. I have EXTENDED lug nuts NOW and they will accommodate the 1/2 longer stud. I use a 5MM spacer currently when I track with an APEX EC7 ET25 18 x 11 wheel and MICHELIN 30 65 18 slicks ALL THE WAY around.

kropscamaro16 · 03-09-2022, 10:35 AM

mind if i ask you how much they were and where did you get them from? i believe my hub may be damaged or i may have a bent/damaged wheel

sr71bb · 03-09-2022, 10:49 AM

Quote:

Originally Posted by kropscamaro16

mind if i ask you how much they were and where did you get them from? i believe my hub may be damaged or i may have a bent/damaged wheel

Well I got them from my local dealer CLASSIC CHEVROLET out of grapevine texas for 85.00 each. GM Part number 13542187
GMPARTSDIRECT has them as well as many others.

They have changed the part number SEVERAL times but 13542187 is the most CURRENT one.

kropscamaro16 · 03-09-2022, 10:53 AM

thanks!

MatthewAMEL · 03-14-2022, 10:10 AM

If you are still looking...Lethalperformance.com has a bunch of the 100-7736 sets inbound for Wednesday. Those are the .5" longer version.

I just placed an order this morning.

If you go to the website, you are in the right place. Yes, they are primarily a Mustang shop, but they do have a GM section.

https://www.lethalperformance.com/ar...-100-7736.html

03-07-2022, 04:47 PM	#1
sr71bb Drives: 2019 Camaro Z-28 Join Date: Jul 2010 Location: Dallas Posts: 1,485	Need Help Finding ARP wheel Studs Well it appears there is a SHORTAGE of ARP fasteners specifically wheel studs. I need some help trying to find some in stock NOW so that I can replace a broken Wheel Stud . Part number is ARP 100-7736. Those studs are HALF inch LONGER than normal. I need 10 for the fronts. I thought maybe one of you track rats might have a set or two you kept as SPARES???? lol Tried all typical sources like Summit but NO LUCK As a last resort I guess I can go back to the GM parts bin for stock studs. THANKS!!! __________________ __________________________________________ 2019 SS 1LE BIG NA A10 Eagles Canyon Raceway 2.7 CCW Below https://youtu.be/c9M5UHDftcA 4-15-23 at SCCA TT U1 Class MEGA Thread on THIS car: https://www.camaro6.com/forums/showthread.php?t=602092 Retired Cars BELOW: 1973 Camaro, 1969 Camaro, 1969 Camaro SS RS 2010 Camaro SS with 1000HP F1R, 2019 ZL1 1LE A10

03-07-2022, 05:41 PM	#2
Trochoidal Drives: 2017 Camaro 2SS A8 Join Date: May 2019 Location: USA Posts: 1,656	Did you try RDP? https://www.rdpstore.com/p-10461-whe...-100-7736.aspx Maybe 7737 if you don’t mind the 1” length. MSI in NC might be worth calling too. __________________ Roto-Fab w/sound tube delete, Katech ported TB, Pray IM, Velossa, DD side markers, DSX FF, UPR Catch can, Halo brace, My custom vent gauge pod Originally Posted by arpad_m - “Aww, yet another oil thread with almost the same question in the OP“

03-07-2022, 05:55 PM	#4
DaveC113 Drives: 2018 Camaro 1SS 1LE Join Date: Sep 2018 Location: Front Range, CO Posts: 1,868	Hey, I have a set of these. I used them for a season, cut the "nose" off so closed lugnuts fit. I wasn't really considering letting them go but if you can't find them new I'll sell you mine. __________________

03-07-2022, 10:14 PM	#5
sr71bb Drives: 2019 Camaro Z-28 Join Date: Jul 2010 Location: Dallas Posts: 1,485	Well JEGS lets you put them in your CART and I called them and they said they are not in stock now LOL RDPSTORE might be a possibility THANKS for the iNFO __________________ __________________________________________ 2019 SS 1LE BIG NA A10 Eagles Canyon Raceway 2.7 CCW Below https://youtu.be/c9M5UHDftcA 4-15-23 at SCCA TT U1 Class MEGA Thread on THIS car: https://www.camaro6.com/forums/showthread.php?t=602092 Retired Cars BELOW: 1973 Camaro, 1969 Camaro, 1969 Camaro SS RS 2010 Camaro SS with 1000HP F1R, 2019 ZL1 1LE A10

03-08-2022, 07:18 AM	#6
That1guy_tim Drives: Camaro 1ss Join Date: Nov 2019 Location: Wisconsin Posts: 495	Get truck studs off of RockAuto they are like 2 bucks a piece. __________________ Follow me on IG for build thread! https://www.instagram.com/tracked_1ss/ YouTube: https://www.youtube.com/@Tracked_1ss FortuneAuto Coilovers! https://shop-fortune-auto.com/produc...ries-coilovers

03-07-2022, 05:52 PM	#3
SDF62 Drives: 2016 Garnet Red Camaro 2SS Join Date: Sep 2018 Location: Columbia, Mo. Posts: 176	Jegs looks like they have some....I have also bought some from Katech in the past.

03-08-2022, 10:12 AM	#8
Katech_Zach Drives: 14 Camaro SS 1LE Join Date: Feb 2019 Location: Clinton Twp, MI Posts: 483	I have dorman heavy duty truck studs, 12mm longer than stock, but 19mm more useable threads (not as big of a lead). I'd give them to you for cheap (set of 10), leftover from my 5th gen camaro project I sold. I had 20, and used 10 for the front only. PM me if youre interested, they'd get you by if you were open to running those over the ARP

03-08-2022, 08:53 PM	#9
ICTsccaCamaro ITCRNRS Drives: 2018 ZL1 1LE Join Date: Jun 2012 Location: Wichita KS Posts: 1,575	Like others have said see if you can get the 1in longer ones, I'm running them in the front and .5in in the rear. __________________ 2018 ZL1 1LE Ordered 6/29/17 Built 11/6/17 Delivered 12/7/17, Summit White, PDR, NAV, https://www.youtube.com/c/tylerpotter SOLD: 2014 Summit White 1LE 2SS/RS, Recaros, NPP, NAV, KONI Yellow's SOLD: 2012 Black 2LT/RS, Fully 1LE swapped, Brembo swap

03-09-2022, 09:18 AM	#10
sr71bb Drives: 2019 Camaro Z-28 Join Date: Jul 2010 Location: Dallas Posts: 1,485	UPDATE For the time being, I replaced BOTH my front hubs with new ones and those come with NEW studs. It takes about an hour per side to do that. INSTALLATION TIP. Initially I had ALL kinds of issues with having enough clearance to take TWO of the THREE bolts out of the HUB assembly because of clearance issues with the suspension. I finally wrestled ONE of the TWO bolts out but COULD NOT get the lower bolt out that is closest to the FRONT of the car. I then remembered that since I run -3.6 degrees camber, THAT brings the suspension components CLOSER in to the head of the bolt (3 - 15MM by the way). SO.....I changed the camber to ALL the way POSITIVE and that provided enough clearance to be able to pull the bolts out. I took this route because I had the ORIGINAL front bearing assembly and with all the heat I generate with slicks and DTC70 pads on a ZL1 set up, it certainly can affect the perfomance of the wheel bearing over time. I ordered a set of 100-7736 ARP wheel studs and they are about a month out. I have EXTENDED lug nuts NOW and they will accommodate the 1/2 longer stud. I use a 5MM spacer currently when I track with an APEX EC7 ET25 18 x 11 wheel and MICHELIN 30 65 18 slicks ALL THE WAY around. __________________ __________________________________________ 2019 SS 1LE BIG NA A10 Eagles Canyon Raceway 2.7 CCW Below https://youtu.be/c9M5UHDftcA 4-15-23 at SCCA TT U1 Class MEGA Thread on THIS car: https://www.camaro6.com/forums/showthread.php?t=602092 Retired Cars BELOW: 1973 Camaro, 1969 Camaro, 1969 Camaro SS RS 2010 Camaro SS with 1000HP F1R, 2019 ZL1 1LE A10

03-09-2022, 10:35 AM	#11
kropscamaro16 Drives: 2016 1ss camaro Join Date: Feb 2016 Location: 909 Posts: 9,817	mind if i ask you how much they were and where did you get them from? i believe my hub may be damaged or i may have a bent/damaged wheel __________________ 16 1SS NIGHTFALL GRAY METALLIC WITH NPP #BECAUSERACECAR #SAVETHEMANUALS

03-09-2022, 10:53 AM	#13
kropscamaro16 Drives: 2016 1ss camaro Join Date: Feb 2016 Location: 909 Posts: 9,817	thanks! __________________ 16 1SS NIGHTFALL GRAY METALLIC WITH NPP #BECAUSERACECAR #SAVETHEMANUALS

03-14-2022, 10:10 AM	#14
MatthewAMEL Drives: 2023 CT5 Blackwing Join Date: Sep 2016 Location: Orlando Posts: 1,618	If you are still looking...Lethalperformance.com has a bunch of the 100-7736 sets inbound for Wednesday. Those are the .5" longer version. I just placed an order this morning. If you go to the website, you are in the right place. Yes, they are primarily a Mustang shop, but they do have a GM section. https://www.lethalperformance.com/ar...-100-7736.html __________________ 2017 HBM SS 1LE Sold 2023 Wave Metallic CT5-V Blackwing M6

User Name		Remember Me?
Password