01-11-2017, 04:40 PM | #1 |
Drives: 2010 Inferno Orange SS Join Date: Sep 2014
Location: United States
Posts: 120
|
Service Stabilitrak issue
Today for the second time in a month the service stabilitrak came on... This happens when the car is hot and just sits for a few minutes. When I try and start the car it starts very slowly almost wanting to die, but then starts. Service Stabilitrak comes on and the rpm gauge does not work. Only, this time I moved the car back about 10 feet first before shutting down. When I put car in park it died. Later when leaving work car starts fine, but this time check engine light is on. I put scan tool on and I pull an p0172 and p0175. Bank1 and Bank 2 to rich? Is this tune related or something entirely different?
|
01-11-2017, 06:57 PM | #2 |
Drives: rumble bee,2SS 6sp Join Date: May 2009
Location: pittsburgh, PA
Posts: 539
|
Original battery? Headers? I have the same problem but 5 codes.
__________________
blk 2ss 6spd with sunroof.
intake,tsp cam,full exhaust,pcmforless tune,trailing arms,toe rods. hopeing for 11.9 because my g/f said she will take the cam and the suspension back if not. |
01-13-2017, 01:45 AM | #3 |
Evil Bee Texas
Drives: 2010 YELLOW SS Join Date: May 2016
Location: houston,TX
Posts: 41
|
Could be the crank shaft sensor
|
01-24-2017, 08:14 PM | #4 |
Drives: ABM 1ss/rs 6spd Join Date: Jan 2017
Location: Va
Posts: 4
|
Check the grounds and wiring in the engine bay.
Does your cruise control still work? |
|
|
|
|