08-30-2020, 01:46 AM | #1 |
Drives: Chevy Camaro SS convertible 2012 Join Date: Jul 2020
Location: Sweden
Posts: 17
|
Axle back problems
Hi.
I had intended to replace the rear muffler, but when I checked under the car I saw that it was not original, there is an x-pipe system. The rear mufflers have a slightly unusual diameter at the attachment it is 70 mm (2.75 ") original is 63.5 mm (2.5"). I thought of having straight pipes instead but can not find any that fit. |
08-30-2020, 08:23 AM | #2 |
Drives: 13' 1LE Join Date: Apr 2012
Location: Canada
Posts: 2,640
|
Why replace? Seems like a nice system.
...Do cutout instead?
__________________
13' 1LE
Old setup: TSP 231-236/Tick 660/.105 PR, UDP, SW LT 2'' & HFC, stock NPP & H pipe, VR-DRX CAI, air scoop, Goertz1 manifold, 102mm BBK, 26" Toyo DRs, Forgestars R17x10 & F18x8, rear seat delete, remote Pat G tune Autocal, 7400 limiter, Spec Mini Twin. 91oct. 11.90@122.3, 0-60ft 2.0 / 11.99@123.6, 0-60ft 2.1 DA+819 ...519RWHP SAE Solid roller SBE LS3, FED, LLSR, 91oct, 605rwhp N/A. Tuned by Pat G. Build by me. |
09-02-2020, 05:08 PM | #3 |
Drives: 2015 2SS White Convertible CE/INDY Join Date: Mar 2016
Location: Lockport, IL
Posts: 780
|
You have a convertible?
joe...
__________________
ARH LTH/HFC/Legato muffler, RDP Custom Tune, K&N Blackhawk CAI, Bigworm Blackout kit, ZL1 Rims, Phantom Grills, VMAX PTB
|
09-05-2020, 01:40 AM | #4 |
Drives: Chevy Camaro SS convertible 2012 Join Date: Jul 2020
Location: Sweden
Posts: 17
|
|
09-05-2020, 01:41 AM | #5 |
Drives: Chevy Camaro SS convertible 2012 Join Date: Jul 2020
Location: Sweden
Posts: 17
|
|
09-05-2020, 03:30 AM | #6 |
Drives: 2010 2SS/RS A6 Join Date: May 2019
Location: Hki.Finland
Posts: 950
|
It looks like custom made.
Last edited by chevy pilot; 09-05-2020 at 03:59 AM. |
09-06-2020, 09:44 PM | #7 |
Drives: 2011 2SS, 2006 GMC Sierra Join Date: Jul 2019
Location: MA
Posts: 243
|
Looks custom. Tig welded
2 3/4 pipe is used |
|
|
|
|