09-18-2019, 10:39 AM | #1 |
Drives: Z06 wannabe Join Date: Feb 2015
Location: Daytona Beach, FL
Posts: 1,200
|
FS: Solo Mach XL Catback with J pipes! $750 Shipped
This is the Solo Mach XL with J pipes
2.5" catback exhaust, connects to factory location with stock clamps. This system came off of 2011 SS after about 10,000 miles. Had it on Quic for 500 miles, it was a glorious sound..... However, I have LTH and Catless mid pipes, so she was a far more aggressive sound in that setup than I wanted. https://youtu.be/lpDQaTgj3ME No Drone at all. One of the better fitting systems I have installed in the car, i've had 6 different setups on Quic. Tips are not perfect, but not bad either. $750 Shipped Local pickup available. Thanks.
__________________
Apex Focused
Last edited by QUICRNU; 02-28-2020 at 08:05 PM. |
09-18-2019, 03:52 PM | #3 | |
Drives: Z06 wannabe Join Date: Feb 2015
Location: Daytona Beach, FL
Posts: 1,200
|
Quote:
Appreciate it.
__________________
Apex Focused
|
|
09-18-2019, 04:37 PM | #4 |
Started#gottalovethatblue
|
No problem. If people click on my link they can hear it with a BTR Stage II NA cam as well. It's a great setup and I'd buy it again. Like you said, it was a super easy install with great fitment too. I did it by myself on ramps in my garage.
__________________
|
09-20-2019, 09:00 AM | #5 |
Drives: 2010 Inferno Orange SS Join Date: Sep 2014
Location: United States
Posts: 120
|
I have this same exhaust. Bump for a great sounding system. Absolutely no DRONE what so ever. Also I really like the fit and the fact that there are not many places you need the clamps. So very easy to adjust and it stays put. Problem with other systems is you almost always will need to weld because of so many pieces. Did I mention NO DRONE! GLWS.
|
09-24-2019, 07:42 PM | #6 |
Drives: Z06 wannabe Join Date: Feb 2015
Location: Daytona Beach, FL
Posts: 1,200
|
Bump
__________________
Apex Focused
|
10-07-2019, 12:17 AM | #7 |
Drives: Z06 wannabe Join Date: Feb 2015
Location: Daytona Beach, FL
Posts: 1,200
|
Bump
__________________
Apex Focused
|
10-18-2019, 10:33 PM | #8 |
Drives: Z06 wannabe Join Date: Feb 2015
Location: Daytona Beach, FL
Posts: 1,200
|
Ttt
__________________
Apex Focused
|
10-26-2019, 03:06 PM | #9 |
Drives: Z06 wannabe Join Date: Feb 2015
Location: Daytona Beach, FL
Posts: 1,200
|
Ttt
__________________
Apex Focused
|
11-03-2019, 06:23 AM | #10 |
Drives: Z06 wannabe Join Date: Feb 2015
Location: Daytona Beach, FL
Posts: 1,200
|
Still available!
__________________
Apex Focused
|
11-26-2019, 02:27 PM | #11 |
Drives: Z06 wannabe Join Date: Feb 2015
Location: Daytona Beach, FL
Posts: 1,200
|
Bump
__________________
Apex Focused
|
11-27-2019, 06:58 AM | #12 |
Drives: 2011 Camaro SS Join Date: Sep 2017
Location: Peoria
Posts: 254
|
How is this still for sale - I have this on my car and it sounds amazing - someone snag this up!!!!!
__________________
2011 SS -GPI SS3 vvt, circle D 4c, 3.91 gears, solo mach xl exhaust, speed engineering headers, bo white ported throttle body, Roto fab intake, adm transcooler, elite catch can
|
11-27-2019, 10:25 PM | #13 |
Drives: 2010 Camaro 2SS/RS Black & Silver Join Date: Aug 2010
Location: Richmond, VA
Posts: 8,228
|
I have the solo axle back with LT headers, HF cats and factory resonator. I like the sound I have now but I’m wondering how the sound would be with this setup. I’m local also.
__________________
STAINLESS WORKS HEADERS-TUNED BY JANNETTY RACING-C.A.I. INTAKE-TAYLOR 409 WIRES-SOLO AXLE BACK EXHAUST-ELITE CATCH CAN |
11-27-2019, 11:06 PM | #14 |
Drives: Z06 wannabe Join Date: Feb 2015
Location: Daytona Beach, FL
Posts: 1,200
|
Well..... It isnt on the car, and I have 2" Headers cat delete into solo mach xl..... It sounded Angry Alot....
I think it would sound spot on with HF Cats.
__________________
Apex Focused
|
|
|
|
|