07-30-2021, 08:55 PM | #1 |
Drives: 2017 Arctic Blue Metallic A8 SS Join Date: Mar 2017
Location: Mission Viejo SoCal
Posts: 78
|
Plexiglass fine scratch remover
Is there an effective product out there to remove fine scratches from the top cover of the GM CAI?
__________________
2017 SS Arctic Blue Metallic A8 GM big brake kit SG3 Lowering & FE4 sway Bar Kits
|
07-30-2021, 09:19 PM | #2 |
Drives: 2017 Camaro 2SS A8 Join Date: May 2019
Location: USA
Posts: 1,656
|
I’d suggest this product. We manufacture parts from acrylic/plexiglass. After machining we remove the cutter swirls from the end mill by wet sanding to smooth the surface. After that we polish the acrylic/plexiglass with a very similar product to what I’m suggesting. $20 and some of your time and you should be good to go.
I doubt you need to wet sand. If you do I wouldn’t use an aggressive grit. If you do need to wet sand I’d also suggest getting the 2” hook and loop kit. Maybe 4000 grit to start and keep it soaked. https://www.amazon.com/Novus-7100-Pl...02UCYRZU&psc=1
__________________
Roto-Fab w/sound tube delete, Katech ported TB, Pray IM, Velossa, DD side markers, DSX FF, UPR Catch can, Halo brace, My custom vent gauge pod
Originally Posted by arpad_m - “Aww, yet another oil thread with almost the same question in the OP“ |
07-30-2021, 09:31 PM | #3 |
Drives: 2017 Arctic Blue Metallic A8 SS Join Date: Mar 2017
Location: Mission Viejo SoCal
Posts: 78
|
Thank you
|
|
|
Post Reply
|
|
|