Phone holder (3D print) - Page 3

RamAir02 · 06-30-2021, 09:31 AM

Quote:

Originally Posted by ste6000

there are websites that you can upload the file to and let them print and ship it for you.

Yes, but it is not at all economical... at least from what I've seen

Shapeways --

ste6000 · 06-30-2021, 06:54 PM

Quote:

Originally Posted by RamAir02

Yes, but it is not at all economical... at least from what I've seen

Shapeways --

well the sites do a more you make. so if you can get a group buy then you can sell them for cheaper.

MakCamaro · 07-01-2021, 12:51 AM

All sites are too expensive. Can someone print one for me? If yes, please let me know so that I give you the dimensions. I will pay the material used and shipping.

pzoom · 07-01-2021, 08:58 AM

Quote:

Originally Posted by RamAir02

Yes, but it is not at all economical... at least from what I've seen

Shapeways --

It is expensive, but you have to account for time (materials are cheap). My printer (Monoprice Maker that I bought ~4 years ago for $300) takes over 24 hours to print the 6.5" version. That's assuming it doesn't fail in the middle of the print. I have a few of those when I switched from ABS black to PLA green. Running multiples will not reduce time unfortunately. Then there are the small "artifacts" that needed to be sanded, trimmed, etc.

TurnPikeSpike · 07-05-2021, 01:09 AM

Could someone modify the original design to fit the 12 Pro Max with a Lifeproof case? The case dimensions are 6.84x3.57x0.44(in) or 173.74x90.68x11.18(mm). I'm not sure how much extra room would be needed for it to fit properly. Also, Xometry.com allows you to upload the file and modify material and some color and it is about $50-$60 depending on material. Thank You

deejayhoff · 07-17-2021, 05:58 PM

If someone wants one printed in black, I can do for $15. You'll have to send me what file you want. I can make some modifications for you, but that may be a little more depending on what you want. Email the file you want printed and I'll do it. deejayhoff@gmail.com

RamAir02 · 07-17-2021, 08:23 PM

Quote:

Originally Posted by deejayhoff

If someone wants one printed in black, I can do for $15. You'll have to send me what file you want. I can make some modifications for you, but that may be a little more depending on what you want. Email the file you want printed and I'll do it. deejayhoff@gmail.com

That would be amazing! I just emailed you.

Thanks!

RamAir02 · 07-30-2021, 01:02 PM

Just wanted to follow up here and share that deejayhoff hooked it up! The phone holder works perfectly. Really happy with it and huge thanks to deejayhoff for helping me out

TenTwo · 08-27-2021, 11:11 AM

edit: never mind I think I figured it out

edit #2: not quite actually. I adjusted the size for a Samsung Galaxy S21 Ultra with a 6.8in screen. The numbers I came up with, in millimeters:

Units: Millimeter
Scale: 4.8176%
Width: 177.1642 mm
Height: 32.5686 mm
Depth: 62.1629 mm

Does that look right? I can't figure out how to save the zip file.

NateZ28 · 10-18-2021, 12:24 PM

I'd pay someone to 3D print this for me. Tired of using the cup holder for my phone.

2SSVERT · 10-23-2021, 05:30 PM

Came out pretty good, only took 20 hours to print. Name: WIN_20211023_17_23_57_Pro.jpg
Views: 448
Size: 107.4 KB

joekd · 11-02-2021, 12:59 PM

Having a couple of these printed now, already have a white one done which can be dyed or painted and having a black one run now

Depending on which I like better I may sell off the extra if anyone is interested, this is the Camclip12 size from page 1 of this thread

BrandanK · 11-18-2021, 06:49 AM

Thanks for the inspiration pzoom.
I went a little different route. Vertical orientation between the lower seat bolsters, next to the seat belt. I can put the phone in with the Lightning port up or down; there is a small relief at the bottom of the mount for the Lightning cable. A double sided barb keeps the mount hooked between the center console and carpet.

This configuration might not work for everyone. I am 5'-3" and sit fairly far forward, which creates a small gap between the seat and center console.
Printed on our Markforged Mark Two with Onyx Nylon.
Designed in Solidworks. Made for the iPhone XS

david_acm · 05-29-2022, 01:06 PM

Quote:

Originally Posted by BrandanK

Thanks for the inspiration pzoom.
I went a little different route. Vertical orientation between the lower seat bolsters, next to the seat belt. I can put the phone in with the Lightning port up or down; there is a small relief at the bottom of the mount for the Lightning cable. A double sided barb keeps the mount hooked between the center console and carpet.

This configuration might not work for everyone. I am 5'-3" and sit fairly far forward, which creates a small gap between the seat and center console.
Printed on our Markforged Mark Two with Onyx Nylon.
Designed in Solidworks. Made for the iPhone XS

Do you still have the file for this and do you mind sharing it?

07-01-2021, 12:51 AM	#31
MakCamaro Makis Drives: 2020 Red Hot ZL1 A10 Join Date: Apr 2019 Location: London - UK Posts: 806	All sites are too expensive. Can someone print one for me? If yes, please let me know so that I give you the dimensions. I will pay the material used and shipping. __________________ Red Hot 2020 Camaro ZL1 A10 <-- Enjoying the hell out of it Mosaic black 2018 Camaro 2SS A8 (sold)

07-17-2021, 05:58 PM	#34
deejayhoff Drives: Chevy Camaro Join Date: Jun 2021 Location: PA Posts: 3	print phone holder If someone wants one printed in black, I can do for $15. You'll have to send me what file you want. I can make some modifications for you, but that may be a little more depending on what you want. Email the file you want printed and I'll do it. deejayhoff@gmail.com

07-30-2021, 01:02 PM	#36
RamAir02 Shadow Gray '19 ZLE M6 Drives: '19 ZL1 1LE M6 Join Date: Apr 2009 Location: NJ Posts: 1,441 View My Garage	Just wanted to follow up here and share that deejayhoff hooked it up! The phone holder works perfectly. Really happy with it and huge thanks to deejayhoff for helping me out Attached Images __________________ 2019 ZL1 1LE \| M6 \| SGM \| PDR \| CF Dash \| Nav \| Wheel Locks PPF \| Paint Correction \| ZL1 Addons Rock Guards \| ZL1 Addons Lift Pads \| ZL1 Addons Feather Lite Tow Hook \| JWM Smoked Sidemarkers \| Wildhammer Smoked Rear Reflectors \| JWM License Plate LEDs \| RotoFab CAI \| ADM IC Reservoir v2 \| BC Forged RZ05 \| SPL Toe Arms \| BW Brake Deflectors \| CMS Roll Bar \| Schroth Profi II ASM Harnesses . Sold: '99 Trans Am (bolt-ons & cam) \| '00 WS6 (bolt-ons, heads, cam, 12 bolt) \| '05 CTS-V (bolt-ons, short throw) \| '10 SS/RS M6 (short throw, CAI, coilovers, LTs, catback, JRE tune) \| '01 WS6 YouTube

08-27-2021, 11:11 AM	#37
TenTwo Drives: Chevy Camaro LT1 Join Date: Aug 2021 Location: KS Posts: 35	edit: never mind I think I figured it out edit #2: not quite actually. I adjusted the size for a Samsung Galaxy S21 Ultra with a 6.8in screen. The numbers I came up with, in millimeters: Units: Millimeter Scale: 4.8176% Width: 177.1642 mm Height: 32.5686 mm Depth: 62.1629 mm Does that look right? I can't figure out how to save the zip file. Last edited by TenTwo; 08-27-2021 at 12:42 PM.

11-02-2021, 12:59 PM	#40
joekd Drives: 2018 Camaro SS vert Join Date: Oct 2020 Location: CT Posts: 449	Having a couple of these printed now, already have a white one done which can be dyed or painted and having a black one run now Depending on which I like better I may sell off the extra if anyone is interested, this is the Camclip12 size from page 1 of this thread __________________

07-05-2021, 01:09 AM	#33
TurnPikeSpike Drives: 2014 SS 1LE 2019 Camaro ZL1/1LE Join Date: Apr 2021 Location: Shawnee,KS Posts: 30	Could someone modify the original design to fit the 12 Pro Max with a Lifeproof case? The case dimensions are 6.84x3.57x0.44(in) or 173.74x90.68x11.18(mm). I'm not sure how much extra room would be needed for it to fit properly. Also, Xometry.com allows you to upload the file and modify material and some color and it is about $50-$60 depending on material. Thank You

10-18-2021, 12:24 PM	#38
NateZ28 Drives: 2019 Camaro 2SS 1LE Join Date: Sep 2021 Location: Tampa, Florida Posts: 3	I'd pay someone to 3D print this for me. Tired of using the cup holder for my phone.

10-23-2021, 05:30 PM	#39
2SSVERT Drives: 17 garnet red 2ss vert Join Date: Apr 2018 Location: Highland Village, Tx. Posts: 45	Came out pretty good, only took 20 hours to print.

11-18-2021, 06:49 AM	#41
BrandanK Drives: 2021 Camaro SS 1LE Join Date: Feb 2020 Location: Indianapolis IN Posts: 255 View My Garage	Thanks for the inspiration pzoom. I went a little different route. Vertical orientation between the lower seat bolsters, next to the seat belt. I can put the phone in with the Lightning port up or down; there is a small relief at the bottom of the mount for the Lightning cable. A double sided barb keeps the mount hooked between the center console and carpet. This configuration might not work for everyone. I am 5'-3" and sit fairly far forward, which creates a small gap between the seat and center console. Printed on our Markforged Mark Two with Onyx Nylon. Designed in Solidworks. Made for the iPhone XS Attached Images

User Name		Remember Me?
Password