05-28-2021, 07:58 AM | #43 |
Drives: '20 ZLE Join Date: Jun 2020
Location: Mile High
Posts: 3,558
|
And you need a tuner that has proven experience with such tuning. Your ECM tuner might not be a T93 TCM tuner. There's a lot more to do than just increase line pressures.
__________________
'20 ZL1 1LE A10,
OEM short block, LME heads/valve train, E2650. 100+ octanes, no eth, no meth, no N2O. 2/23 - 1031/1004 wheel. 4/23 - 1.41/9.61/145 at DA 7000 ft. (only made five passes). 2/24 - LME 390, E2650, FBO, 100 oct.; 1116hp/ 1063tq; 109 oct. dyno next. |
05-28-2021, 08:18 AM | #44 |
Drives: '20 ZLE Join Date: Jun 2020
Location: Mile High
Posts: 3,558
|
I understood the '19 was tunable via HPT?
__________________
'20 ZL1 1LE A10,
OEM short block, LME heads/valve train, E2650. 100+ octanes, no eth, no meth, no N2O. 2/23 - 1031/1004 wheel. 4/23 - 1.41/9.61/145 at DA 7000 ft. (only made five passes). 2/24 - LME 390, E2650, FBO, 100 oct.; 1116hp/ 1063tq; 109 oct. dyno next. |
05-28-2021, 07:37 PM | #45 |
Account Suspended
Drives: '21 Wild Cherry ZL1 Join Date: Aug 2018
Location: WI
Posts: 2,082
|
|
05-29-2021, 03:18 AM | #46 | |
Drives: 19 ZLE A10,17 SS 1LE, 16 C7R,CT5V Join Date: Feb 2017
Location: Berryville, VA
Posts: 175
|
Quote:
19 zl1 1le a10 came with t93. So quite a crap shoot. I’m excited for it! Just got my bracket so she goes in next week. Sent from my iPhone using Tapatalk |
|
05-29-2021, 07:28 AM | #47 |
Drives: '20 ZLE Join Date: Jun 2020
Location: Mile High
Posts: 3,558
|
HHP on Facebook. TCM business looks good
__________________
'20 ZL1 1LE A10,
OEM short block, LME heads/valve train, E2650. 100+ octanes, no eth, no meth, no N2O. 2/23 - 1031/1004 wheel. 4/23 - 1.41/9.61/145 at DA 7000 ft. (only made five passes). 2/24 - LME 390, E2650, FBO, 100 oct.; 1116hp/ 1063tq; 109 oct. dyno next. |
06-02-2021, 11:25 PM | #48 | |
Drives: 2022 Camaro ZL1 Convertible A10 Join Date: Aug 2012
Location: Memphis, TN
Posts: 382
|
Quote:
OMG this is great news. Hot Rod ingenuity strikes again My plan to buy a new ZL1 A10 in 2022 is back on now. |
|
06-03-2021, 10:35 AM | #49 |
Drives: '20 ZLE Join Date: Jun 2020
Location: Mile High
Posts: 3,558
|
Yes, my next project is to tune my SuperMatic 10L90 for better down-low performance
__________________
'20 ZL1 1LE A10,
OEM short block, LME heads/valve train, E2650. 100+ octanes, no eth, no meth, no N2O. 2/23 - 1031/1004 wheel. 4/23 - 1.41/9.61/145 at DA 7000 ft. (only made five passes). 2/24 - LME 390, E2650, FBO, 100 oct.; 1116hp/ 1063tq; 109 oct. dyno next. Last edited by JSH; 06-03-2021 at 04:12 PM. |
06-03-2021, 11:02 AM | #50 |
Drives: 2016 1SS NFG A8 Join Date: Aug 2017
Location: 46804
Posts: 6,796
|
You can't tune the T93. The T93 is replaced with a T87a. You probably meant "Tune my A10" but either way it needs to be clear so others are not confused.
__________________
2016 NFG 1SS A8
Options-2SS Leather/NPP Perf. mods-Whipple 2.9/Fuel System/Flex Fuel/103mm TB/Rotofab Big Gulp/Cat Deletes/Corsa NPP Per. times- 10.5 @ 137 w/ 1.8 60ft Full weight on 20's 1200DA |
06-03-2021, 11:35 AM | #51 |
Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 11,601
|
Hey, he said "project", who knows how high he's aiming
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 |
06-03-2021, 01:21 PM | #52 |
Drives: 2019 ZL1 Join Date: Mar 2019
Location: NJ
Posts: 1,534
|
JSH has no clue what he’s talking about
__________________
928rwhp - 93 | 1040rwhp/898rwrq - E65 SAE
LME 377 LT4 Short Block | Magnuson 2650 80mm upper w/13% lower (9.06) | DSX Lid & Valve Covers | CSP Custom Cam w/32% fuel lobe | CID Heads | NW 103mm TB | Roto Fab Big Gulp | CSP 2" Headers w/Green GESI Gen 2 Cats | Borla 3" Full Cat Back w/ S-Type| Mighty Mouse Wild Catch Can| Custom Holley Low side Fuel system| TooHigh PSI Port Injection w/Holley Controller | Forced Inductions Interchiller w/2 gallon fender tank | TK Performance built 10L90 |
06-03-2021, 03:39 PM | #53 |
Drives: '20 ZLE Join Date: Jun 2020
Location: Mile High
Posts: 3,558
|
Typos are my trademark.
__________________
'20 ZL1 1LE A10,
OEM short block, LME heads/valve train, E2650. 100+ octanes, no eth, no meth, no N2O. 2/23 - 1031/1004 wheel. 4/23 - 1.41/9.61/145 at DA 7000 ft. (only made five passes). 2/24 - LME 390, E2650, FBO, 100 oct.; 1116hp/ 1063tq; 109 oct. dyno next. |
06-03-2021, 08:30 PM | #54 |
Drives: 2016 1SS NFG A8 Join Date: Aug 2017
Location: 46804
Posts: 6,796
|
No worries...just wanted to clarify since this is a hot topic right now for the newer A10 stuff.
__________________
2016 NFG 1SS A8
Options-2SS Leather/NPP Perf. mods-Whipple 2.9/Fuel System/Flex Fuel/103mm TB/Rotofab Big Gulp/Cat Deletes/Corsa NPP Per. times- 10.5 @ 137 w/ 1.8 60ft Full weight on 20's 1200DA |
06-21-2021, 10:17 PM | #55 |
Drives: 2020 Camaro ZL1 Join Date: Oct 2020
Location: Fort Worth, Texas
Posts: 1,140
|
Bump…..How is anyone that purchased this enjoying it so far? Big differences? Worth the upgrade?
__________________
2020 ZL1 A10 Shadow Gray Metallic
Magnuson Magnum DI TVS2650R| Mamo Throttle Body V2| RotoFab Intake| AWE Touring Catback Exhaust| TCM Tune| Tune| Eibach Pro| BMR Rear Cradle Lockout| PPF| Ceramic| BCForged HCS21 |
06-22-2021, 01:23 AM | #56 |
Drives: 2022 ZLE 6M Join Date: Jun 2021
Location: California
Posts: 68
|
Does this allow for a more responsive manual shifting mode as-well?
(reduce the lag from shift pedal input) |
|
|
Post Reply
|
|
|