[The Maverick]

Originally Posted by samurai

The front fascias should match. The problem is that the hood lines don't align between the frontends, so the hood should be swapped too. Headlights and lower DRLs also have to be switched.

Correct on the hood - but per Gen5diy, the headlights cannot be swapped, so a bodywork solution is probably required to make the fascia "fit" the headlights.

I have all the parts (I think) staged to give my '21 a '16-18 facelift, so eventually I will have some more practical info about this...

[arpad_m]

Originally Posted by L78toLT1

Hey Arpad_m, have you verified that the new module actually works? If so, it will be my next mod!

Like a charm, did the swap myself. See the attached compatibility chart from Aug 2019; there may be a newer version out there, I didn't look.

I have a Samsung Galaxy S10e with AAWireless, so I just plop down the phone on the pad, it starts charging at a decent clip and supplies Android Auto wirelessly.

[The Maverick]

Originally Posted by TheeMajorBone

My 2014 White SS (sedan) was totaled couple weeks ago, searching for the right Camaro SS, and am limited because I really don't want to buy anything outside of the 2016-2018 years.

Does anyone know if the 2019+ hood/fenders would allow a front clip to be bolted on?

I would think "yes" due to the ZL1 being the same for 2019+.

I finally completed a similar swap with my 2021 3LT RS (although I changed both the front fascia and the hood). See my summary DIY forum post for information about how to "de-fresh" a 2019+ Camaro.