01-11-2020, 05:00 PM | #1 |
Drives: 2020 LT1 Join Date: Nov 2019
Location: Tampa, FL
Posts: 187
|
2020 LT1 6spd TCM on. 0-60 4.8 sec (edited)
So I bought into the hype. Picked up the lt1. I like it but.... My v6 Challenger absolutely rapes this thing with the traction control on.
What are your 0-60 times with a manual and the nannies on? Last edited by ThirdGenNut; 01-18-2020 at 04:47 PM. |
01-12-2020, 04:00 PM | #2 |
Petro-sexual
|
With respect... what did you expect to run with TC on? It isn't going to run it's fastest, that's for sure. Maybe I'm missing something...
__________________
'20 ZL1 Black "Fury" A10, PDR, Exposed CF Extractor Magnuson Magnum DI TVS2650R // RFBG // Soler 103 // TooHighPSI Port Injection // THPSI Billet Lid // FF // Katech Drop-In // PLM Heat Exchanger // ZLE Cradle bushings // BMR Chassis-Suspension Stuff // aFe Bars // Diode Dynamics LEDs // ACS Composites Guards // CF Dash // Aeroforce // tint // other stuffs |
01-12-2020, 05:59 PM | #3 |
Drives: 2018 Camaro V6/RS Join Date: Nov 2018
Location: MI
Posts: 1,596
|
Even with the TC on it should be WAY faster than 6.9.
|
01-12-2020, 06:19 PM | #4 |
Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 11,623
|
No way an LT1 does a near 7-second 0-60, even with traction control on, something's not right here. Can you post a video?
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 |
01-12-2020, 07:12 PM | #5 |
Dumb Ass Deluxe
Drives: A Tricked Out Mountain Bike Join Date: Jun 2019
Location: Arizona
Posts: 1,959
|
Finding this hard to believe....
|
01-13-2020, 06:25 AM | #6 |
Drives: 2017 Camaro 1SS M6 Join Date: Apr 2015
Location: Indy
Posts: 2,460
|
Something is not adding up. I’m assuming you revved to a high engine speed and dumped the clutch and traction control needed to aggressively pull back power. What were the ambient temps? Very cold?
You probably just need some practice. I’d recommend attending some test and tune nights when your local drag strip opens to dial in your time. You should be able to get down to low 4’s.
__________________
2017 Camaro 1SS, M6, Hurst shifter, Hyper Blue, NPP, Gray Split Spoke Wheels
Best 1/4 Mile: 12.24 @ 115.9 mph |
01-13-2020, 04:37 PM | #7 |
Drives: 2020 LT1 Join Date: Nov 2019
Location: Tampa, FL
Posts: 187
|
You guys are right I do need more practice but man 6.9!? I'm using one of those obd2 readers to get the time. I'm not trying to boil the tires, just get the car rolling and mat it.
|
01-13-2020, 04:43 PM | #8 |
Petro-sexual
|
Wasn't trying to come off a smart-@$$ or anything; just trying to be helpful
It's probably like you and others have said: just seat time. Maybe, when funds permit: get some good tires to help hook up. If you're goofing off on the street, it will make it harder on OEM tires, because there's not a lot of grip to be had in a lot of circumstances. Just more practice
__________________
'20 ZL1 Black "Fury" A10, PDR, Exposed CF Extractor Magnuson Magnum DI TVS2650R // RFBG // Soler 103 // TooHighPSI Port Injection // THPSI Billet Lid // FF // Katech Drop-In // PLM Heat Exchanger // ZLE Cradle bushings // BMR Chassis-Suspension Stuff // aFe Bars // Diode Dynamics LEDs // ACS Composites Guards // CF Dash // Aeroforce // tint // other stuffs |
01-13-2020, 04:54 PM | #9 | |
Drives: 2020 LT1 Join Date: Nov 2019
Location: Tampa, FL
Posts: 187
|
Quote:
I would still like to know what time I should shoot for with the TC on. |
|
01-13-2020, 05:00 PM | #10 |
Drives: 2020 LT1 Join Date: Nov 2019
Location: Tampa, FL
Posts: 187
|
I noticed my tire pressures are at 37 psi. I should probably get those down. Also Wife was in the car.
My worst 0-60 in the challenger was 6.4. |
01-13-2020, 05:03 PM | #11 |
Drives: 2020 LT1 Join Date: Nov 2019
Location: Tampa, FL
Posts: 187
|
Just one more thing before I log off.
I did crush a 3 series tesla with the wife in the car. When I chirped 2nd he gave up. |
01-13-2020, 06:12 PM | #12 |
Drives: like an old lady Join Date: Jun 2012
Location: indiana
Posts: 2,396
|
chirpin gears and pullin brodies gets em every time.
__________________
2016+ camaro: everyone’s first car
|
01-14-2020, 10:01 AM | #13 |
Drives: 17 Camaro SS 1LE & 16 Sierra AT CC Join Date: Nov 2016
Location: Norman, OK
Posts: 2,424
|
I would set the tires as per the door sticker on the drivers side door at the cold temp. If you leave the T/C on the computer can intervene enough to destroy the 0-60 times. Also the hose BT OBD2 programs are not the greatest at measuring time accurately. Best way is to use a stop watch and the old fashion method.
__________________
2019 Corvette Z06 2LZ A8 - Halltech CAI, AWE non-catted X-pipe, Mamo V2 ported TB 592rwhp, bone stock 566rwhp
2017 Camaro SS 1LE - Procharger D1SC w/ Tial 2" BOV & Race intercooler / ARH full length catless headers / Alky meth injection system - 650rwhp on conservative tune SOLD |
01-14-2020, 10:27 AM | #14 |
Drives: 2016 Camaro SS Join Date: Sep 2018
Location: Bartlett, TN
Posts: 1,121
|
Does the LT1 not have the timers in them? I would use those before an OBD2 timer, those things are not accurate.
|
|
|
Post Reply
|
|
|