Beam Tripper - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Vegas Bound · 06-07-2020, 09:51 AM

Does anybody make a NHRA compliant beam tripper for the Gen 5?

Tajefe Couple · 06-07-2020, 03:11 PM

Saw the guys at fonse performance make custom ones

https://www.facebook.com/LUPIRACING/...9560520673867/

Silveradoss573 · 06-07-2020, 03:36 PM

Everyone I've seen has been custom. We ran one on a 67 Camaro. We used carbon fiber and had to fab up the hanger and mounts. 45 inches from the front axle centerline and no lower than 3 inches from the ground and it has to be permanently mounted to the vehicle. I've seen people use old licence plates.

06-07-2020, 09:51 AM	#1
Vegas Bound Account Suspended Drives: 2013 Sparkly Red One Join Date: Dec 2018 Location: Hospitality State Posts: 2,558	Beam Tripper Does anybody make a NHRA compliant beam tripper for the Gen 5?

06-07-2020, 03:11 PM	#2
Tajefe Couple Drives: Never just fly under the radar Join Date: Jul 2015 Location: Kansas Posts: 1,531 View My Garage	Saw the guys at fonse performance make custom ones https://www.facebook.com/LUPIRACING/...9560520673867/ __________________ 1-8-4-3-6-5-7-2 Old Skool

06-07-2020, 03:36 PM	#3
Silveradoss573 Drives: Camaro 1LE Join Date: May 2018 Location: USA Posts: 1,348	Everyone I've seen has been custom. We ran one on a 67 Camaro. We used carbon fiber and had to fab up the hanger and mounts. 45 inches from the front axle centerline and no lower than 3 inches from the ground and it has to be permanently mounted to the vehicle. I've seen people use old licence plates.