Will anyone offer an aftermarket replacement for the NPP exhaust?

Eric SS · 12-02-2015, 08:25 AM

Hear me out. When I order my car, I would like to order the NPP option not so much for the actual exhaust itself, but for the software and hardware. It would be pretty cool if aftermarket companies eventually offered a replacement for the NPP exhaust that you could install and plug into the NPP harness at the rear. I know the NPP sounds good as it sits but I'm sure A/M companies could come up with an even better sounding exhaust that could take advantage of the software and hardware. And possibly track mode could be a cutout just prior to the muffler or something. Hey, a drag strip is still a "track" right?

I'm not sure there would be a huge demand which might hurt the chances of this happening but it would still be a cool option for those that get the NPP and want to change out the cat back at a later date but retain the ability to switch noise and performance levels.

Bassment · 12-02-2015, 08:27 AM

I feel at some point someone will. It seems to me that nearly everyone is getting NPP. There is a lot of money to be made with an aftermarket exhaust that works with it but also makes it better.

SS 1LE · 12-02-2015, 08:38 AM

Pretty sure Borla makes one for the C7...if someone does for the Camaro, it will be quite costly. I am going to remove the extra two non o2 equipped cats and that should add some volume.

Clearly_Canadian · 12-02-2015, 08:48 AM

Quote:

Originally Posted by SUMMIT WHITE SS

Pretty sure Borla makes one for the C7...if someone does for the Camaro, it will be quite costly. I am going to remove the extra two non o2 equipped cats and that should add some volume.

yes, borla is the one for C7. and YES, very pricey..

Obsessed 17 · 12-02-2015, 08:55 AM

Would be nice if they came out with just an axleback replacement for the giant muffler. It would be cheaper.

Denis · 12-02-2015, 09:27 AM

Quote:

Originally Posted by Clearly_Canadian

yes, borla is the one for C7. and YES, very pricey..

http://www.borla.com/products/c7_cor...rt__11875.html

heres one of Borlas NPP equipped axle back's.....$2200

paul84043 · 12-02-2015, 10:27 AM

I have mentioned this a few times, but I had a friend that talked at length with the engineer in charge of the Dual Mode Exhaust on both the 5th gen and the 6th gen at the finding new roads event.
Gen 5 was one thing, he said that the Gen 6 is another animal completely and that it would be much more difficult, not to mention a HUGE waste of money to replace the Dual Mode on it..
The time and engineering that went in to that alone is really amazing....
Without a doubt someone will rip it off and replace it and talk about how much "better" it is..
Just the way we are.

DanaM · 12-02-2015, 10:51 AM

Quote:

Originally Posted by Eric SS

Hear me out.

OMG, I was soooooo ready to pounce on you until I read the first 3 words of your post. LOL, yeah that would be great if someone does offer that mod.

SSNYSTR · 12-02-2015, 11:32 AM

Yep. Borla does offer one for the Corvette. I've posted about it before. Them making one for the Camaro would be great, but I'm sure the price would be around $2,500 or so.

GretchenGotGrowl · 12-02-2015, 11:33 AM

Quote:

Originally Posted by Denis

http://www.borla.com/products/c7_cor...rt__11875.html

heres one of Borlas NPP equipped axle back's.....$2200

The type S is a little cheaper than the ATAK, but it is pricey. Hopefully it will be cheaper for the Camaros.

Jshadow · 12-02-2015, 11:37 AM

Wonder how good the stock NPP setup will sound with long tube headers...

Denis · 12-02-2015, 11:39 AM

Quote:

Originally Posted by Jshadow

Wonder how good the stock NPP setup will sound with long tube headers...

im hoping similar to how it sounds now with the 5th gen because that's a nice combo.

tpmotorsports · 12-02-2015, 11:40 AM

Hooker had headers and NPP replacement on display at SEMA this year, I did not get any photos

Eric SS · 12-02-2015, 12:12 PM

Quote:

Originally Posted by tpmotorsports

Hooker had headers and NPP replacement on display at SEMA this year, I did not get any photos

Good to know they will have one, bummer there are no photos. I looked on their website and couldn't find anything either. Thanks.

12-02-2015, 08:25 AM	#1
Eric SS #becauseracecar Drives: 2016 SS Sedan, 2016 Camaro SS Join Date: May 2015 Location: Phoenix Posts: 2,959	Will anyone offer an aftermarket replacement for the NPP exhaust? Hear me out. When I order my car, I would like to order the NPP option not so much for the actual exhaust itself, but for the software and hardware. It would be pretty cool if aftermarket companies eventually offered a replacement for the NPP exhaust that you could install and plug into the NPP harness at the rear. I know the NPP sounds good as it sits but I'm sure A/M companies could come up with an even better sounding exhaust that could take advantage of the software and hardware. And possibly track mode could be a cutout just prior to the muffler or something. Hey, a drag strip is still a "track" right? I'm not sure there would be a huge demand which might hurt the chances of this happening but it would still be a cool option for those that get the NPP and want to change out the cat back at a later date but retain the ability to switch noise and performance levels.

12-02-2015, 11:32 AM	#9
SSNYSTR Drives: Black 2011 Camaro 2SS Join Date: Feb 2013 Location: Chackbay, La Posts: 698 View My Garage	Yep. Borla does offer one for the Corvette. I've posted about it before. Them making one for the Camaro would be great, but I'm sure the price would be around $2,500 or so. __________________ http://www.camaro5.com/forums/showthread.php?t=334019

12-02-2015, 11:37 AM	#11
Jshadow 31B MP Drives: 2010 1SS CGM Camaro Join Date: Jun 2010 Location: Virginia Beach Posts: 597	Wonder how good the stock NPP setup will sound with long tube headers... __________________ 2016 Red Hot 2SS soon....

12-02-2015, 11:40 AM	#13
tpmotorsports Drives: Camaros Join Date: Dec 2014 Location: Tampa, FL Posts: 250 View My Garage	Hooker had headers and NPP replacement on display at SEMA this year, I did not get any photos Attached Images __________________ '17 ZO6 - Watkins Gray Metallic '17 911 4GTS - Carmine Red '17 Bolt - Hyper Blue '02 SS - 35th Anniversary Ed. - 645 miles '89 IROC Z - 2500 miles '73 Z28 - Survivor 36k miles '69 RS/SS 496 - 631 HP 618 TQ '67 SS - Alum. 406 under construction

12-02-2015, 08:27 AM	#2
Bassment Drives: 2016 Red Hot 2SS M6 Join Date: May 2015 Location: Ontario Posts: 468	I feel at some point someone will. It seems to me that nearly everyone is getting NPP. There is a lot of money to be made with an aftermarket exhaust that works with it but also makes it better.

12-02-2015, 08:38 AM	#3
SS 1LE マスタング = 遅い Drives: 2017 Chevrolet Camaro SS 1LE Join Date: Aug 2015 Location: Florida Posts: 7,061	Pretty sure Borla makes one for the C7...if someone does for the Camaro, it will be quite costly. I am going to remove the extra two non o2 equipped cats and that should add some volume.

12-02-2015, 08:55 AM	#5
Obsessed 17 Drives: 2016 Chevy Colorado Z71 Join Date: May 2015 Location: NH Posts: 149	Would be nice if they came out with just an axleback replacement for the giant muffler. It would be cheaper.

12-02-2015, 10:27 AM	#7
paul84043 Drives: 2015 Camaro 2SS RS 1LE Join Date: Nov 2011 Location: Lehi, Utah Posts: 1,349 View My Garage	I have mentioned this a few times, but I had a friend that talked at length with the engineer in charge of the Dual Mode Exhaust on both the 5th gen and the 6th gen at the finding new roads event. Gen 5 was one thing, he said that the Gen 6 is another animal completely and that it would be much more difficult, not to mention a HUGE waste of money to replace the Dual Mode on it.. The time and engineering that went in to that alone is really amazing.... Without a doubt someone will rip it off and replace it and talk about how much "better" it is.. Just the way we are.

User Name		Remember Me?
Password