09-28-2022, 04:10 AM | #1 |
Drives: '18 2SSM6 Camaro ‘01C5Z06 Vet Join Date: May 2019
Location: GM Wonderland
Posts: 105
|
Baer 15" Extreme+ big brakes
Guys,
Any experience out there with Baer 15" rotors and Extreme+ 6 pot calipers? They do a big brake kit with 15" rotors/calipers on all corners. I know that these are expensive but I have had Baer stuff before and you get your moneys worth But I just havent seen anything on our forum yet but over on Camaro5 they seem quite popular.. Maybe Brembo have stolen the market Views please |
09-28-2022, 08:52 AM | #2 |
Drives: Rapid Blue 2022 Camaro 1SS Join Date: Sep 2021
Location: Waterloo, Iowa
Posts: 204
|
As long as you get a quality brake kit from a reputable source, and Baer is reputable, then the only concern you should have is will it fit. To answer that question, email Baer and request the dimension specs to ensure the caliper and the rotor will fir inside your wheels.
__________________
9/9/2021 - 1100 (date of deposit)
10/15/2021 - 2000 11/4/2021 - 3100 Status TPW 11/15 11/9/2021 - 3400 Status TPW 11/15 11/24/2021 - 3800 Status built 11/21/2021 12/2/2021 - 5000 Status 12/13/2021 - 6000 Status |
09-29-2022, 04:50 PM | #3 |
Drives: '16 2SS M6 Join Date: Aug 2019
Location: Hughes Springs, TX
Posts: 320
|
The factory front 6 piston Brembo (which work VERY well) is 14.6". GM doesn't offer the Brembo kit anymore, but you could find some used take offs or piece it together with new ZL1 parts as an option.
__________________
David
'16 2SS M6 black on black, SW long tube full exhaust, NPP, Roto-fab CAI, ported stock TB '16 2SS M6 black w/Metallic black stripes, Kalahari, 6 piston front (totaled 1/22/20) '14 Fusion Titanium 2.0T '83 Jeep Wagoneer Last edited by easttxss; 10-03-2022 at 02:02 PM. |
10-03-2022, 02:54 AM | #4 | |
Drives: '18 2SSM6 Camaro ‘01C5Z06 Vet Join Date: May 2019
Location: GM Wonderland
Posts: 105
|
Quote:
|
|
10-03-2022, 02:56 AM | #5 |
Drives: '18 2SSM6 Camaro ‘01C5Z06 Vet Join Date: May 2019
Location: GM Wonderland
Posts: 105
|
So the 6 piston Brembo option is off the books..when did that happen?
|
10-03-2022, 01:30 PM | #6 |
Drives: '16 2SS M6 Join Date: Aug 2019
Location: Hughes Springs, TX
Posts: 320
|
Sorry about that, I looked up the wrong part number. It looks like they are still available. #84236462
__________________
David
'16 2SS M6 black on black, SW long tube full exhaust, NPP, Roto-fab CAI, ported stock TB '16 2SS M6 black w/Metallic black stripes, Kalahari, 6 piston front (totaled 1/22/20) '14 Fusion Titanium 2.0T '83 Jeep Wagoneer Last edited by easttxss; 10-03-2022 at 01:59 PM. |
10-05-2022, 10:17 AM | #7 |
Drives: '18 2SSM6 Camaro ‘01C5Z06 Vet Join Date: May 2019
Location: GM Wonderland
Posts: 105
|
|
|
|
Post Reply
|
|
|