[S.Macias]

Wasn't feeling the semi-gloss powder coated black that came with the vents so I sanded and repainted to match the body.

[S.Macias]

Took it autocrossing for the first time since the upgrades. Huge difference. One of the faster cars of the day.

[glw2023lt1/rs]

Originally Posted by S.Macias

Over time, the rear diffuser was fading to that ugly gray color. I decided it was time to paint it black to match the body. Overall, I'm happy with my $40 DIY results.

Last image is before and after.

looks real nice, what kind of prep work did you do, I know you cant make it smooth like the aftermarket type, also what paint did you use, and will the paint stick ok without any promoter thanks

[S.Macias]

Originally Posted by glw2023lt1/rs

looks real nice, what kind of prep work did you do, I know you cant make it smooth like the aftermarket type, also what paint did you use, and will the paint stick ok without any promoter thanks

First I cleaned and wet sanded. Then I used two light coats of adhesion promoter. Used two coats of the duplicolor sandable primer in black. Then after the primer is dry do a coat of adhesion promoter. Then 4 coats of duplicolor universal gloss black paint. Let dry. Then 3 coats of the duplicolor acrylic lacquer clear coat (blue can with car, motorcycle, house, helmet on can). Took a out a day to do. Install the next day after everything sits for 24 hours

[S.Macias]

New OEM struts and rear shocks paired with Eibach pro-kit lowering springs.

[S.Macias]

Installed a new door check on the driver side. Man what a difference. Also decided to remove the wrap on the hood and wing. Doesn't look like it's in a primer stage anymore and makes it way more aggressive.

[S.Macias]

Full detail last night, then did some autocross this morning and afternoon.

[S.Macias]

Some of the more official photos from Sunday

[S.Macias]

Installed the Shrader rear seat delete. Fairly easy. Pretty much 22 pounds of weight off.

Cloth bench: 17.9lb
Cloth Back: 11.3lb
Rear seatbelts (all pieces): 4.5lb

Total: 33.7lb

Shrader: 11.5lb

Difference: 22.2lb

[S.Macias]

Installed BMR rear of rear cradle chassis brace

[S.Macias]

Comprehensive List as of 2/27/2024

Brakes
· ACDelco Brake Air Duct Kit
· GM SS Front Four-Piston Brembos with GM 13.6" Rotors
· Goodridge Stainless Steel Braided Front Brake Lines
· Motul 5.1 Brake Fluid
· POR-15 Yellow Painted Calipers
· Powerstop Z26 Rear Carbon Fiber Pads with Drilled and Slotted Brake Rotors

Exhaust
· Flowmaster American Thunder Axle-Back Exhaust

Exterior
· American Authority Upper and Lower Grille
· Cuztom Tuning Black Tow Hook
· GM Fuel Door – Gloss Black
· Painted Rear Diffuser – Dual Exhaust – Gloss Black
· Race Louvers Center Hood Louver – RS, Semi Black Powder Coat
· Race Louvers Curved Fender Louver – Semi Black Powder Coat
· Side Wing Mirror Cover Caps – Gloss Black
· ZL1 1LE Style Wing – Gloss Black
· ZL1 Style Front Bumper Lip Spoiler – Gloss Black
· ZL1 Style Side Skirt Extensions – Gloss Black

Intake
· Active Fuel Management (AFM) Disabler
· Green Filter Drop-in Air Filter
· JacFab Ported Intake Manifold
· K&N Performance Intake System with Sound Tube Delete
· Reflect-A-Gold High Temperature Heat Reflective Adhesive
· Soler Performance 76mm Eff. Throttle Body
· Soler Performance Throttle Controller
· VelossaTech Big Mouth Ram Air Intake Snorkel

Interior
· 3D Maxpider All Weather Floor Mats – Black
· JBraum Elite-X Jet Black Racing Seats (Driver and Passenger)

· Camaro Black Seat Belt Cover Pads
· Camaro Visor Warning Decal Covers
· Carbon Fiber Interior Package (Full)
· Carbon Fiber Steering Wheel
· Fuel and Brake Foot Pedals
· Jet Black Leather Gray Stitch Knee Pads
· Planted Seat Brackets (Driver and Passenger)

· Shrader Performance Rear Seat Delete
· Stainless Steel Door Striker Covers- Black
· Steering Wheel Paddle Shifter Extension
· Trunk Handle Strap - Yellow

Lighting
· BigWormGraphix LED Footwell Lighting – Blue
· Gen5DIY Non-RS to RS Taillight Harness
· Genuine GM Darkened Rear Third Brake Light
· Genuine GM Darkened Taillights
· Kensun HID H11 Conversion Kit 55W – 6000K
· Smoked LED Diffuser Lights
· Smoked LED Side Marker Lights
· Twinkle Fiber Optic Star Ceiling Light Kit - 335 Piece

Suspension
· BMR Driveshaft Tunnel Brace – Red
· BMR Front of Rear Cradle Brace – Red
· BMR Rear of Rear Cradle Chassis Brace – Red
· BMR Sway Bar Kit with Bushings, Front and Rear – Red
· BMR Sway Bar End Links, Rear – Red
· Eibach Lower Springs Pro-Kit
· GM FE3 Sway Bar End Links, Front
· ZZP Strut Tower Brace

Tints
· BigWormGraphix Smoked DRL Overlay
· BigWormGraphix Smoked Headlight Overlay
· Vehicle Rear – 5%; Vehicle Fronts – 20%; Windshield Strip – 5%

Tires
· 1LE Track Alignment
· ColorLugs LugCaps – Black
· Continental Extreme Contact DWS06 Plus 275/35/ZR20 Fronts
· Continental Extreme Contact DWS06 Plus 305/30/ZR20 Rears
· HUB Centric 5mm Spacers (All Fours Wheels)
· McGard Lug Nuts – Black
· ZL1 1LE Style Front Rims – 20” x 9.5” – Gloss Black
· ZL1 1LE Style Rear Rims – 20” x 11” – Gloss Black

[S.Macias]

Got my hands on practically new SS Brembo 4-Piston calipers, SS front rotors, SS dust shields and the SS stock brembo pads. Local guy was selling for cheap. Waiting on my Goodridge braided stainless steel front lines then getting it all installed. Switching from DOT 4 to the Motul 5.1 since it is a daily driven.

[S.Macias]

Goodridge front stainless steel braided lines came in. Painted the calipers yellow to match what's currently on. Brembo stickers should be here in a few days. Install next Thursday (6/1). Then new fluid flush and 0W-40 oil (6/6)

[S.Macias]

4 piston Brembos, braided steel lines, Motul 5.1 fluid.... All I can say is wow.

And for those interested in doing the same on your 2.0/3.6, all you need is the brembo calipers (caliper bolts are the same as the single piston stock calipers), a set of the 13.6" rotors, and likely new SS brake lines or a set of the stainless steel lines (I ordered mine for $75 from ZZP). Overall cost was a little under $700 including the Motul brake fluid and install with flush