06-02-2023, 02:50 PM | #29 |
Drives: 2017 Chevrolet Camaro ZL1 Join Date: Jul 2018
Location: Canton, GA
Posts: 405
|
Here is another one. It gets quite a few more technical build topics posted. I don’t moderate that one.
__________________
2017 ZL1 - PB 8.05 @ 172 MPH @ 3730 lbs @ 70 DA (work in progress)
Built by Vengeance Racing, tuned by Elite Tuned |
06-04-2023, 03:33 PM | #30 | |
Drives: '20 ZLE Join Date: Jun 2020
Location: Mile High
Posts: 3,560
|
Quote:
__________________
'20 ZL1 1LE A10,
OEM short block, LME heads/valve train, E2650. 100+ octanes, no eth, no meth, no N2O. 2/23 - 1031/1004 wheel. 4/23 - 1.41/9.61/145 at DA 7000 ft. (only made five passes). 2/24 - LME 390, E2650, FBO, 100 oct.; 1116hp/ 1063tq; 109 oct. dyno next. |
|
06-04-2023, 04:34 PM | #31 |
Account Suspended
Drives: Chevy Camaro ZL1 Join Date: Feb 2023
Location: Floriduh
Posts: 121
|
That group is ran by the rotofab people. They are chumps and idiots. Save yourself and dont join any FB groups.
|
06-05-2023, 07:59 AM | #32 |
Drives: 2017 Chevrolet Camaro ZL1 Join Date: Jul 2018
Location: Canton, GA
Posts: 405
|
They weren't running it, that was the issue. Countless Amazon "work from home" job and event posts, YouTube videos of interstate takeovers, sales ads for home gym equipment, etc... It was a mess. They basically turned it over to me for moderating but are still there and you'll see a post about RotoFab products periodically. My car doesn't run a RotoFab, if that helps with your assessment.
__________________
2017 ZL1 - PB 8.05 @ 172 MPH @ 3730 lbs @ 70 DA (work in progress)
Built by Vengeance Racing, tuned by Elite Tuned Last edited by ZL1Atlanta; 06-05-2023 at 08:16 AM. |
06-05-2023, 08:01 AM | #33 |
Drives: 2017 Chevrolet Camaro ZL1 Join Date: Jul 2018
Location: Canton, GA
Posts: 405
|
Sounds good. It isn't a very chatty group, but the fastest/quickest 6th gen guys are there. If you have a topic about drag racing - something you are doing, looking for advice, etc., feel free to post.
__________________
2017 ZL1 - PB 8.05 @ 172 MPH @ 3730 lbs @ 70 DA (work in progress)
Built by Vengeance Racing, tuned by Elite Tuned |
06-05-2023, 08:15 AM | #34 |
Drives: '20 ZLE Join Date: Jun 2020
Location: Mile High
Posts: 3,560
|
I'm doing a 15 in. conversion, and an MS109 tune this week, so I might have questions about those.
__________________
'20 ZL1 1LE A10,
OEM short block, LME heads/valve train, E2650. 100+ octanes, no eth, no meth, no N2O. 2/23 - 1031/1004 wheel. 4/23 - 1.41/9.61/145 at DA 7000 ft. (only made five passes). 2/24 - LME 390, E2650, FBO, 100 oct.; 1116hp/ 1063tq; 109 oct. dyno next. |
|
|
Post Reply
|
|
|