[german tarquini]

with flex sensor gas and alcohol pe tables must match
thanks

[Joshinator99]

Originally Posted by german tarquini

with flex sensor gas and alcohol pe tables must match
thanks

They do not have to match.

[german tarquini]

my alcohol table is lower that is correct
example
5120rpm -1223 throttle
5120rpm -1160 alcohol
should i upload them?
either
thanks

[Joshinator99]

Originally Posted by german tarquini

my alcohol table is lower that is correct
example
5120rpm -1223 throttle
5120rpm -1160 alcohol
should i upload them?
either
thanks

I don’t have my laptop handy so can’t check, but it’s not unusual to see the alcohol run a bit leaner than 93. But that looks like more of a difference than I would be comfortable with. I don’t know anything about your combo but would target .82 lambda in a stock bottom end LT1 with a blower and .84 with a forged bottom end.

[german tarquini]

afr log and correction
if it does not maintain the indicated value
thanks !!!!!
in oct 93 I am in lambda .817