[waterman]

Originally Posted by solobaric

Is this a bolt on system or do I have to hack off the secondary cats permanently? Would like the option to put secondary back on when I sell the car.

Secondary cats are attached by a flange fitting on one side and a slide type M/F compression fitting on the other. No cutting necessary (similar to Borla 60626/60606 secondary cat delete). OEM exhaust stays intact if you ever want to return to stock down the road.

[Aperretta]

Made the purchase but looking at a couple of weeks for lead time.

[waterman]

Originally Posted by Aperretta

Made the purchase but looking at a couple of weeks for lead time.

Roger that. Keep us posted on your progress.

If possible please post some pre installation pics when you receive your BBE.
Thanks in advance.

[MSU120]

Originally Posted by Aperretta

Made the purchase but looking at a couple of weeks for lead time.

I’m very curious how this goes. I want this but want to hear a review first.

[Aperretta]

Originally Posted by waterman

Roger that. Keep us posted on your progress.

If possible please post some pre installation pics when you receive your BBE.
Thanks in advance.

I’ll put up a good post about installation with before and after pics/videos. I’m going to be using an iPhone, so that’s the Only bad thing to expect for sound quality.

Im excited but a little nervous to be the first customer with a 6gen (documented online).

[waterman]

Originally Posted by Aperretta

I’ll put up a good post about installation with before and after pics/videos. I’m going to be using an iPhone, so that’s the Only bad thing to expect for sound quality.

Im excited but a little nervous to be the first customer with a 6gen (documented online).

IMHO BBE looks like a really well engineered and a high quality built system. If the workmanship on their site matches your exhaust, you are in for a treat.

[Polishdevil]

Originally Posted by BradfordCamaro

No discount from an unknown manufacturer to promote themselves on a huge forum.
Lame.

They are a very well known company that has been around almost 30 and I believe started with exhausts for Porsche’s. I’ve had 2 of their systems on previous Corvettes and the fit and finish was above anything else. The sound was beyond awesome. Oh and this forum is anything but huge.

[Grumpy1]

Originally Posted by Aperretta

I’ll put up a good post about installation with before and after pics/videos. I’m going to be using an iPhone, so that’s the Only bad thing to expect for sound quality.

Im excited but a little nervous to be the first customer with a 6gen (documented online).

Glad you decided to take the plunge, looking forward to see and hear the outcome.....

[nicktechla]

So it sounds like they have AFM valves in the mid pipe, no matter if you need them or not? I wonder if they will make an option without

[Aperretta]

Originally Posted by nicktechla

So it sounds like they have AFM valves in the mid pipe, no matter if you need them or not? I wonder if they will make an option without

I have manual trans and they are building mine without the afm valves.

[waterman]

Originally Posted by nicktechla

So it sounds like they have AFM valves in the mid pipe, no matter if you need them or not? I wonder if they will make an option without

That was my concern as well.

Originally Posted by Aperretta

I have manual trans and they are building mine without the afm valves.

I'm stoked to hear that mid pipe AFM delete is available for M6. Build to order is a nice touch.

[nicktechla]

Originally Posted by Aperretta

I have manual trans and they are building mine without the afm valves.

that's awesome

[Grumpy1]

I heard both ways that the ZL1 A10 does and doesn't have these valves, which is it?

[nicktechla]

Originally Posted by Grumpy1

I heard both ways that the ZL1 A10 does and doesn't have these valves, which is it?

I believe does not.. I’ll take a peek under my car.