Sport Pedal Kit Install - Page 2

Unbukwarrior · 01-20-2017, 01:35 PM

Can anyone tell me if these would work? They include a foot rest and are the same part number. It seems it's also for the cadillac. :http://www.gmparts2u.com/oe-gm/84134669

Unbukwarrior · 01-20-2017, 01:37 PM

Here's a picture

SSport16 · 01-20-2017, 02:01 PM

It shows Camaro listed as a vehicle they would work on, so I would say yes.

Unbukwarrior · 01-20-2017, 02:09 PM

Cool thanks. I just wasn't sure if the foot pedal would be compatible with the camaro. I might give it a try seeing how I love that it includes the footrest. Looks great!!

Sub · 01-20-2017, 02:16 PM

What is the net result Is heel-toe any easier, or is this aesthetic?

SSport16 · 01-20-2017, 08:42 PM

Let us know if they work and how they look, I want to do mine possibly.

GAbobcat2ss · 01-27-2017, 05:54 PM

For those of you that have installed these. Any tips or tricks. I've spent almost 3 hours trying to get the clutch and brake pedal cover on and I can't get them to fit :( I've tried everything I can think of soak then in hot water try a little soap, wd-40 - nothing helps. Has to be an easier way to get these on. Would appreciate any advice.

BTW the gas pedal was a snap just unbolt and put the new one in.

GAbobcat2ss · 01-28-2017, 02:51 PM

ok finally got the pedal covers installed today. The clutch was a real challenge. After digging through my tool kit and trying various screw drivers the one thing that worked was a shrimp deveiner. Just worked it along the back to get the rubber edge around the pedal.

Hyper16 · 02-08-2017, 06:49 PM

Quote:

Originally Posted by Unbukwarrior

Can anyone tell me if these would work? They include a foot rest and are the same part number. It seems it's also for the cadillac. :http://www.gmparts2u.com/oe-gm/84134669

Let us know if you get those and they work.

I have been wanting the Chevy ones but they don't come with the dead foot pedal cover. I don't like the look unless all the pedals match.

Thanks

LT4Greg · 02-09-2017, 09:46 AM

All in all it took me about an hour to install the 3 pedals(covers) with a couple of 5 min breaks to keep me from cursing and tearing up something. The brake pedal cover was the hardest for me to do and I know the next day all my fingertips were sore from stretching and pulling to install them. I really like the look and IMO Chevy should make them standard equipment on the SS. I think the ZL1 has them but not sure. And no reprogramming but it seemed that the computer had to learn that something was changed(gas pedal).

Corbu · 04-13-2017, 09:12 PM

Quote:

Originally Posted by Unbukwarrior

Can anyone tell me if these would work? They include a foot rest and are the same part number. It seems it's also for the cadillac. :http://www.gmparts2u.com/oe-gm/84134669

Did you manage to get the kit installed? Does it fit on the foot rest?

Unbukwarrior · 04-25-2017, 10:44 PM

Quote:

Originally Posted by Corbu

Did you manage to get the kit installed? Does it fit on the foot rest?

No I haven't but they don't seem to match so I'm not sure they would work. I didn't want to risk it. I know there is definitely aftermarket pedals that contain the footrest. I saw it here on the forums. Ended up just getting the GM ones from my dealer. They look pretty good.

Unbukwarrior · 05-02-2017, 11:01 PM

I managed to find this sight on a camaro5 thread and they have the 2016 dead pedal. Not sure how to install it though other than drill holes into the pedal. It also doesn't have the rubber in between the openings. It is a match though!:
http://ultimatepedals.com/chevrolet/...horizontal.php

Max RS · 05-03-2017, 05:50 AM

I ordered the Cadillac set as I also wanted the dead-pedal. The site I ordered from stated the dead-pedal was included. When the set arrived, all that was included was the gas and brake pedal, as I have the AT, no dead-pedal. I was disappointed that there was no dead-pedal but love the new pedals, look much better.

01-20-2017, 02:01 PM	#17
SSport16 Drives: 2016 Garnet Red Camaro 2SS Join Date: Jul 2015 Location: North Carolina Posts: 5,435	It shows Camaro listed as a vehicle they would work on, so I would say yes. __________________ 2SS Camaro, Garnet Red, Adrenaline Red, NPP, MRC, A8, 5 Split Spoke Bright Silver Wheels (56W) 1100 Status - 7/24/15 (Ordered) 3800 Status - 10/13/15 (Built) 6000 Status - 12/22/15 (Delivered)

01-20-2017, 02:16 PM	#19
Sub Drives: 2017 ZL1 Join Date: Oct 2016 Location: Ny Posts: 859	What is the net result Is heel-toe any easier, or is this aesthetic? __________________ My Car Blog and mods. Previous Chevys: 2016 2ss, 2015 C7 z51, 2004 C5 Z06

01-20-2017, 08:42 PM	#20
SSport16 Drives: 2016 Garnet Red Camaro 2SS Join Date: Jul 2015 Location: North Carolina Posts: 5,435	Let us know if they work and how they look, I want to do mine possibly. __________________ 2SS Camaro, Garnet Red, Adrenaline Red, NPP, MRC, A8, 5 Split Spoke Bright Silver Wheels (56W) 1100 Status - 7/24/15 (Ordered) 3800 Status - 10/13/15 (Built) 6000 Status - 12/22/15 (Delivered)

01-28-2017, 02:51 PM	#22
GAbobcat2ss Drives: 2SS - Nightfall Grey 6m, npp, nav Join Date: May 2016 Location: Cumming GA Posts: 23	ok finally got the pedal covers installed today. The clutch was a real challenge. After digging through my tool kit and trying various screw drivers the one thing that worked was a shrimp deveiner. Just worked it along the back to get the rubber edge around the pedal. Attached Images

02-09-2017, 09:46 AM	#24
LT4Greg Drives: 2017 Camaro ZL1 Coupe Join Date: May 2016 Location: Georgia Posts: 5,811	All in all it took me about an hour to install the 3 pedals(covers) with a couple of 5 min breaks to keep me from cursing and tearing up something. The brake pedal cover was the hardest for me to do and I know the next day all my fingertips were sore from stretching and pulling to install them. I really like the look and IMO Chevy should make them standard equipment on the SS. I think the ZL1 has them but not sure. And no reprogramming but it seemed that the computer had to learn that something was changed(gas pedal). __________________ ZL1 Coupe, PDR, Exposed carbon fiber hood insert, My Link with Nav, M6 6 speed and Silver Ice Metallic. Mods done: ceramic window tint, GM Accessories Camaro floor mats and Roto-Fab CAI.

01-20-2017, 01:35 PM	#15
Unbukwarrior Drives: 1LT 2.0T A8 Join Date: Jan 2017 Location: Montague N.J. Posts: 56	Can anyone tell me if these would work? They include a foot rest and are the same part number. It seems it's also for the cadillac. :http://www.gmparts2u.com/oe-gm/84134669

01-20-2017, 01:37 PM	#16
Unbukwarrior Drives: 1LT 2.0T A8 Join Date: Jan 2017 Location: Montague N.J. Posts: 56	Here's a picture

01-20-2017, 02:09 PM	#18
Unbukwarrior Drives: 1LT 2.0T A8 Join Date: Jan 2017 Location: Montague N.J. Posts: 56	Cool thanks. I just wasn't sure if the foot pedal would be compatible with the camaro. I might give it a try seeing how I love that it includes the footrest. Looks great!!

01-27-2017, 05:54 PM	#21
GAbobcat2ss Drives: 2SS - Nightfall Grey 6m, npp, nav Join Date: May 2016 Location: Cumming GA Posts: 23	For those of you that have installed these. Any tips or tricks. I've spent almost 3 hours trying to get the clutch and brake pedal cover on and I can't get them to fit :( I've tried everything I can think of soak then in hot water try a little soap, wd-40 - nothing helps. Has to be an easier way to get these on. Would appreciate any advice. BTW the gas pedal was a snap just unbolt and put the new one in.

05-02-2017, 11:01 PM	#27
Unbukwarrior Drives: 1LT 2.0T A8 Join Date: Jan 2017 Location: Montague N.J. Posts: 56	I managed to find this sight on a camaro5 thread and they have the 2016 dead pedal. Not sure how to install it though other than drill holes into the pedal. It also doesn't have the rubber in between the openings. It is a match though!: http://ultimatepedals.com/chevrolet/...horizontal.php Attached Images

05-03-2017, 05:50 AM	#28
Max RS Drives: 2016 SS AT Join Date: Jun 2016 Location: SE Georgia Posts: 81	I ordered the Cadillac set as I also wanted the dead-pedal. The site I ordered from stated the dead-pedal was included. When the set arrived, all that was included was the gas and brake pedal, as I have the AT, no dead-pedal. I was disappointed that there was no dead-pedal but love the new pedals, look much better. __________________ 1969 Z-28, 302 4-Speed Sold 1989 350 AT Sold 2013 RS Convertible LFX AT Traded 2016 2SS AT

User Name		Remember Me?
Password