OE 1LE Splitter (Damaged) - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Trawz · 02-23-2024, 03:11 PM

Just testing if there is any interest in the slightly damaged OE splitter from my 2013 1LE.
It is taking up room in my shop and I know these are quite difficult to find.
I was going to toss it in the dumpster but I figured I would put it up here in case someone wanted a little project.
So, if someone wants to take on a slight repair job to have an OE splitter, please have at it.

I removed it because it got damaged when I dodged a deer, but had to go off into the grass shoulder/ditch.
That bit of off-road journey damaged the driver side of the splitter.
There is heavy scratching on the driver side and a slight bend on the far drivers side.

Most of the original mounting clips were broken off and are not included.

Shipping will be a bit pricy due to size.

If there is any interest, make an offer!

olblue75 · 02-23-2024, 08:21 PM

What shipping be to 37042?

Jeff_SS · 02-23-2024, 09:20 PM

I'd be interested. Shipping to 85260?

Trawz · 02-26-2024, 11:12 AM

Quote:

Originally Posted by olblue75

What shipping be to 37042?

Looks to be about $60 on the FedEx calculator.

Quote:

Originally Posted by Jeff_SS

I'd be interested. Shipping to 85260?

Says around $45

Honestly, these prices are way cheaper then I expected.
I asked my shipping guy at my work about shipping it and he said it would be more like $130... Don't know who is right.

Jeff_SS · 02-27-2024, 09:44 PM

Quote:

Originally Posted by Trawz

Says around $45

Honestly, these prices are way cheaper then I expected.
I asked my shipping guy at my work about shipping it and he said it would be more like $130... Don't know who is right.

I'll gladly pay for you to ship this to me if it's around that ballpark. Let me know!

02-23-2024, 03:11 PM	#1
Trawz Drives: 2013 Camaro 1LE Join Date: Jan 2019 Location: Portland, OR Posts: 243 View My Garage	OE 1LE Splitter (Damaged) Just testing if there is any interest in the slightly damaged OE splitter from my 2013 1LE. It is taking up room in my shop and I know these are quite difficult to find. I was going to toss it in the dumpster but I figured I would put it up here in case someone wanted a little project. So, if someone wants to take on a slight repair job to have an OE splitter, please have at it. I removed it because it got damaged when I dodged a deer, but had to go off into the grass shoulder/ditch. That bit of off-road journey damaged the driver side of the splitter. There is heavy scratching on the driver side and a slight bend on the far drivers side. Most of the original mounting clips were broken off and are not included. Shipping will be a bit pricy due to size. If there is any interest, make an offer! __________________ 2013 1SS/1LE Corsa Extreme cat-back, Speed Engineering LT Headers with black ceramic coating, C7 Z06 Front Brake Upgrade, Mishimoto Oil Cooler, BMR Tunnel Brace, Mishimoto Oil Catch Can, MSD Plug Wires, Mishimoto Radiator and Hoses.

02-23-2024, 08:21 PM	#2
olblue75 Drives: 2010 2SS/RS Join Date: Dec 2009 Location: Clarksville Tennesse. Posts: 6,064	What shipping be to 37042? __________________ Orange Krush II 1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components.

02-23-2024, 09:20 PM	#3
Jeff_SS "Cam Only" Drives: 2013 Camaro SS Join Date: Nov 2011 Location: Scottsdale, AZ Posts: 1,709 View My Garage	I'd be interested. Shipping to 85260? __________________ 2013 AGM Camaro 2SS/RS M6 \| LSA Blower, 2.5" pulley, 10% lower, FIC1000's, Fore Innovations Twin Pump fuel system w/ Flex Fuel, CMS Custom Grind Cam, Kooks 1 7/8" headers w/ catless off-road pipes, NPP Exhaust, 3.91's, JLT ZL1 Intake, Prospeed Heat Exchanger \| Pfadt Suspension, 1LE Sway Bars \| DSS 1000hp axles \| Tuned by Ryne @ CMS E85: 734rwhp/636rwtq (mustang dyno)