Vid: Cammed w/cutouts 1-3 gears - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

SSDan · 11-11-2013, 09:18 AM

Here is a taste of an uncorked & cammed LS3 from a rolling start up through third gear. Traction was an issue!

Same thing but with cutouts closed and a poor choice for a launch - road conditions were poor. Really was a slip and slide for traction on this run.

I want to thank my co-pilot and fellow forum member Swizlstik for the use of his Go-pro and his camera operating skills.

LS3 SS · 11-11-2013, 09:48 AM

Nice!! What kind of power are you putting down?? How do you like your 3.91's?

SSDan · 11-11-2013, 10:00 AM

Quote:

Originally Posted by LS3 SS

Nice!! What kind of power are you putting down?? How do you like your 3.91's?

I'm at 461 rwhp and 440 rwtq. The 3.91's really complement the cam and calmed down what little low rpm surging and bucking I had. The engine pulls to red line MUCH quicker in first and second gear. These vids really didn't show that all that well as I was pedaling first gear to stay off the rev limiter so I could have some fun smoking the tires.

swizlstik · 11-11-2013, 11:26 AM

This was a lot of fun! Your car sounds awesome Dan!!

Dznts · 11-11-2013, 01:08 PM

sounds awesome!

SolomonAKOO · 11-11-2013, 04:14 PM

sounds good man!! what VR cam did you go with?

litle88 · 11-11-2013, 04:44 PM

I'll pick the first video any time lol

SSDan · 11-11-2013, 04:45 PM

Quote:

Originally Posted by SolomonAKOO

sounds good man!! what VR cam did you go with?

Its the Stage 2 cam. Its been thumping in there since Feb. 2012 and has delivered about 14000 miles of permagrin!

2010 SSRS · 11-11-2013, 04:50 PM

I love it, the first video really kicks azz with the loudness from the open cut outs, like I always say, Louder the Better

Batmanntexas · 11-12-2013, 02:24 PM

Yep, I agree with them, the first video absolutely rocks! Love the sound!

11-11-2013, 09:48 AM	#2
LS3 SS Drives: 2010 Cyber Grey Camaro SS (LS3) Join Date: Mar 2010 Location: Clarksville TN Posts: 2,275	Nice!! What kind of power are you putting down?? How do you like your 3.91's? __________________ GPI SS3 Cam / PRC 255 heads / Forged 376ci bottom / Fore level 2 fuel system / D1SC ProCharger on 12lbs / Alky control dual nozzle / 770 whp / 649 wtq tuned by Ryan Stevens at GPI

11-11-2013, 11:26 AM	#4
swizlstik Drives: 2018 Garnet ZL1 Join Date: Nov 2011 Location: Surprise, AZ Posts: 2,183 View My Garage	This was a lot of fun! Your car sounds awesome Dan!! __________________

11-11-2013, 01:08 PM	#5
Dznts Anabolic Connoisseur Drives: Sold - Blown Camaro 2SS/RS LS3 Join Date: Sep 2010 Location: Oklahoma Posts: 22,094	sounds awesome! __________________

11-11-2013, 04:14 PM	#6
SolomonAKOO Drives: 2011 2SS/RS Join Date: Apr 2012 Location: Wyoming Posts: 1,210 View My Garage	sounds good man!! what VR cam did you go with? __________________ 1 7/8" TSP headers straight piped, Custom Tick Performance cam w/ supporting mods, 1" BMR springs and other BMR suspension mods. Tuned with HPtuners by Matt@FSP

11-11-2013, 04:44 PM	#7
litle88 V8 Lounge member #2 Drives: 2001 Ws6 Join Date: Sep 2009 Location: Burbank,IL Posts: 6,373	I'll pick the first video any time lol __________________ 2001 ws6, 40k miles, Ls3 416 stroker, short block built by PER the rest by me. LPE Ls3 heads milled to 12-1 comp, FAST 102, NW 102, kooks 2", dual DMH cutouts, Magnaflow C/B, BTR cam + springs. Full UMI suspension.

11-11-2013, 04:50 PM	#9
2010 SSRS Drives: 3 V8 Camaros Join Date: May 2009 Location: The Ocean State Posts: 111,187 View My Garage	I love it, the first video really kicks azz with the loudness from the open cut outs, like I always say, Louder the Better __________________ Jannetty Racing JRE Street Package

11-12-2013, 02:24 PM	#10
Batmanntexas Drives: 2012 Camaro SS (2SS) Join Date: Aug 2012 Location: Stafford, VA Posts: 1,372 View My Garage	Yep, I agree with them, the first video absolutely rocks! Love the sound! __________________ 745RWHP/634RWTQ on 93 @ 10psi 806/676 on E85 @ 10psi COTW 9/8/14