Header Bolts Anti-seize

OVRKLL · 11-23-2019, 01:06 PM

Sorry if this question is one of those that has a given answer, but I've never did this before.

When installing Kooks Headers or headers in general, do you use Anti-seize on the bolts, or install it dry?

I have SS bolts from Summit, and Permatex Anti-seize with a 1,600 degrees F.

Or is there a special Anti-seize for headers to withstand higher temps?

Also, what about on the O2 Sensors?

Thank you!

cellsafemode · 11-23-2019, 01:47 PM

Pretty sure nothing is going to withstand header temps.

Plus unless you plan on swapping out the part frequently, why would you want anti seize?

11-23-2019, 01:06 PM	#1
OVRKLL Drives: 2017 1SS 1LE...makes me go YeeeHaw! Join Date: Mar 2012 Location: Austin, TX Posts: 577	Header Bolts Anti-seize Sorry if this question is one of those that has a given answer, but I've never did this before. When installing Kooks Headers or headers in general, do you use Anti-seize on the bolts, or install it dry? I have SS bolts from Summit, and Permatex Anti-seize with a 1,600 degrees F. Or is there a special Anti-seize for headers to withstand higher temps? Also, what about on the O2 Sensors? Thank you! __________________ The Thrill isn't around the corner, the Thrill is the corner! So don't hesitate, just brake late!

11-23-2019, 01:47 PM	#2
cellsafemode Drives: 2016 Camaro 1LT Join Date: Jan 2016 Location: California Posts: 3,491	Pretty sure nothing is going to withstand header temps. Plus unless you plan on swapping out the part frequently, why would you want anti seize?

User Name		Remember Me?
Password