[MPLJR1222]

Hey guys! I am new to these forums, just took home my 2018 Camaro 1SS today and loving it so far. Just a couple of questions if anyone can answer them for me!

1. I have seen people do the window trick, rolling them down with the key, any idea how to do that?

2. Any suggestions on what type of exhaust to get? (as in catback, axle back, etc)

3. Has anyone replaced the bowtie emblems? Is it hard to do?

Thanks guys!

[Whitespeed]

If you can think of it, it's probably already been done and answered many (many!) times.


Nigel

[frogfish]

Welcome to the site! Youtube and the search feature on this forum will be your friend.

[DC4]

1. If you hold the unlock button on the fob for several seconds it will lower the windows.
2. Don't know
3. Rear bow tie was pretty easy, used a blow dryer and dental floss. Front one was a bigger pain, ended up removing the top metal plate over the radiator and broke the tabs off the back of the old emblem and the new one snaps right in!

[LuvMI]

Welcome as the newest member of the Band-Aids (Almost Famous reference) As far as the window trick, after you unlock her, continue holding the button and walaa!! The magic happens.

As far as exhaust goes I have NPP so I can’t help you there. Plenty of reference on the site tho: YouTube as well.

Far as the emblems go I’ve seen it done by others on both YouTube and here, yet I haven’t done it myself so my advice is no good there. But I’m sure you can locate the info here somewhere if you look. There’s a wealth of wisdom in these here mountains.

[MPLJR1222]

Thanks so far everyone!

[Sev]

Welcome to the site. Adding one tip for you to make your search easier. If you go to google, type in "camaro6" then what you're looking for. 9 times out of 10 it will pull up any threads related to your search from the forum. Hope you're enjoying your car .

[NYJets12]

Congrats I didn’t know that window trick.
Post pictures

[DougCBJ]

For the window to roll down, you have to enable it in the settings menu on the infotainment center. I don't know which section it is under specifically, but it's there and you have to enable it.

[douglas2742]

Originally Posted by MPLJR1222

Hey guys! I am new to these forums, just took home my 2018 Camaro 1SS today and loving it so far. Just a couple of questions if anyone can answer them for me!

1. I have seen people do the window trick, rolling them down with the key, any idea how to do that?

2. Any suggestions on what type of exhaust to get? (as in catback, axle back, etc)

3. Has anyone replaced the bowtie emblems? Is it hard to do?

Thanks guys!

I added a Flowmaster American Thunder axle back exhaust to my stock NPP dual mode and the sound is exhilarating! Not just louder - which it is - but far more intoxicating than the stock muffler. It's simply the best sounding V8 engine I've ever experienced. If it's too loud I switch to TOUR mode which is quieter than SPORT/TRACK, about the same as the stock SPORT/TRACK modes. Not as costly as the other axle backs - I highly recommend it.

[LuvMI]

Like NYJets12 said, bring on the spiffy pics!

[97cavy22]

I’ve owned my car for a year and hand no clue about the window trick. Learn something new everyday

[dfwcowboy]

Originally Posted by MPLJR1222

Hey guys! I am new to these forums, just took home my 2018 Camaro 1SS today and loving it so far. Just a couple of questions if anyone can answer them for me!

1. I have seen people do the window trick, rolling them down with the key, any idea how to do that?

Doesn't work on my 2018 2LT. YMMV.

2. Any suggestions on what type of exhaust to get? (as in catback, axle back, etc)

That's going to greatly depend on the volume and type of sound you want. If you can manage it, best to get together with local Camaro owners and see what they are doing and how you like it. Anything you find on the internet is going to be a poor example of what you can expect yourself.

3. Has anyone replaced the bowtie emblems? Is it hard to do?

It's not hard, but the methods are different depending on which replacements you get. The OEM ones aren't bad to install, but may involve loosening the bumper cover in the front to get at the clips to remove your old one. In the rear it's a standard debadging using 3M adhesive remover, some dental floss or fishing line, and a bit of time and patience.

[DFWZ28]

cr@p, did not know about the window thing either!