[apexit53]

so sad i didnt have my new camaro yet to take part in the cyber monday sale! lol

[Apex Wheels]

Originally Posted by FactoryMatt

teaser pic, still gotta lower it and get some nicer centercaps than the OG apex ones (sorry Apex). standard fitment 19 x 10/11. i noticed some rubbing in the rear even running -1.5deg camber. not sure why the -8mm offset from stock was necessary, esp given it makes them F Street illegal. super nice wheels tho. i think the paint finish has improved from my original SM-10s from 5 years ago, and those were/are still very nice.

Your car looks great with those on there! The forged wheels do have a slightly updated finish compared to the flow formed wheels, I'm glad you like it.

I'm a bit surprised to hear about the rubbing, especially with what looks to be a 295/35-19 rear tire. Typically 305s and even 315s fit back there without rubbing at that camber spec. Is it both sides or just one? The +35mm offset was chosen to work up front with commonly available spacers and wheel studs in a rotatable 11" combination. SCCA Street Class was the casualty there, unfortunately. We do have BMW bore wheels in legal offsets if someone wanted to run in that class (19x11" +44mm).

[FactoryMatt]

Originally Posted by Apex Wheels

Your car looks great with those on there! The forged wheels do have a slightly updated finish compared to the flow formed wheels, I'm glad you like it.

I'm a bit surprised to hear about the rubbing, especially with what looks to be a 295/35-19 rear tire. Typically 305s and even 315s fit back there without rubbing at that camber spec. Is it both sides or just one? The +35mm offset was chosen to work up front with commonly available spacers and wheel studs in a rotatable 11" combination. SCCA Street Class was the casualty there, unfortunately. We do have BMW bore wheels in legal offsets if someone wanted to run in that class (19x11" +44mm).

Thank you! Ah I see. Makes sense. 305/30 V601s on the rear. Just slight rub marks on the shoulders on both sides. Will be running more camber soon. Thanks for the reply.

[FactoryMatt]

Chevy Performance center caps on teh Apexes!

[Apex Wheels]

Bennet swung by with his SS 1LE to try out a few different flavors of our wheels. Which one is your favorite? His car is equipped with a track alignment, otherwise factory suspension.

SM-10RS in Satin Bronze
Front: 19x11" ET9 with 305/30-19
Rear: 19x12" ET41 with 325/30-19




VS-5RS in Anthracite
Front: 20x10.5" ET15 with 285/30-20
Rear: 20x11.5" ET42 with 305/30-20




ARC-8 in Anthracite
Front: 19x11" ET11 with 305/30-19
Rear: 19x12" ET41 with 325/30-19

[Apex Wheels]

Put that refund to work with our Tax Season Sale going on now. Save up to 25% off + Free Shipping* on a huge variety of in-stock fitments. Every Sprint Line Forged and Flow Formed wheel we offer is on sale. This sale ends on April 22nd, but discounts apply while supplies last. Get your order in today!


Learn More

Apex Flow Formed: Up to 25% off

Our most popular wheels. Our original Flow Formed classic ARC-8 and Evolution line SM-10 designs are all heavily represented in this sale. All Apex Flow Formed wheels we currently produce are discounted bringing even more value to our most affordable wheel lines.

Buy Now



Apex Sprint Line Forged: Up to 15% off

The Lightest Wheels We Make. Deep discounts on all of our Fully Forged EC-7RS, SM-10RS, and VS-5RS are available making our high-performance lightweight wheels an even better value.

Buy Now

Apex Accessories: 15% off

All Apex branded accessories are discounted and get free shipping. Get your car ready for the track season today.

Buy Now
[/left]


*Free Shipping to the 48 Contiguous States only.

Questions?
Call: 925-245-0773
Email: expert@apexwheels.com
Web: www.apexwheels.com
Hours: M-F 9a-5p PST

[Texan4iu]

I currently have the EC-7 square setup 19x10.5 that I use for track purposes only. I am looking for a forged setup for the track, similar to my current setup. What are your suggestions?