01-26-2021, 07:20 AM | #1 |
Drives: 2020 Zl1 A10 Riverside Blue Join Date: Mar 2020
Location: NJ
Posts: 1,219
|
Where to cut Oem suit case muffler
So I started installing ARHCAV8-16200300LSWC and it didn't come with instructions. I'm sure I could figure it out but I figured that some knew where to cut to attach the ARH.
Also what is the torque spec for the header bolts? https://americanracingheaders.com/co...nt=29943879492 |
01-26-2021, 09:37 AM | #2 |
|
Phone: (631)-608-1986
|
01-26-2021, 05:20 PM | #3 |
Drives: 2020 Zl1 A10 Riverside Blue Join Date: Mar 2020
Location: NJ
Posts: 1,219
|
So I called ARH and they sent me this picture as they don't have installation instructions.
The picture they sent me have the exhaust actuators after the x-pipe and on the ZL1 they are on the outer exhaust tips. I'll call them tomorrow and see if that makes a difference. |
01-27-2021, 06:34 AM | #4 |
Drives: '18 ZL1 1LE Join Date: May 2020
Location: KY
Posts: 219
|
Those are the AFM valves in that photo before the crushed section. Our cars don't have them so I'd say you just need to focus on cutting where they having pointed out on the photo. Those valves mean nothing to you and are separate from the NPP valves after the muffler.
__________________
2018 ZL1 1LE - Summit White, PDR, Rotofab CAI, 95mm TB, CSP 2" catless LT's, JMS Voltage Booster, AEM X-series WB, DSX flex fuel sensor, Banks Data Monster, Tuned by Ted Jannetty, 5% Tint, Blackvue DR900S-2CH, Diode Dynamics lighting, IGL Kenzo ceramic coating
|
|
|
Post Reply
|
|
|