[Skyman2112]

i saw a shot of MMR Z28 wheels that were 20x10 +23mm with 285/35s on front. Rear had 20x11 +43mm with 305/35s. Has anyone tried this on the Gen6 to see if it rubs? The caption reads 25mm offset on the front but they only offer them in 23mm. I really dont want to use 30 aspect tires if this setup will work. Any opinions appreciated, thanks

[warren3537]

I had them on my 17 1SS and with a 3mm spacer then it puts them out to 20mm and no rubbing, things were real close but no rubbing, I hope this helps.

[TheRealJA105]

This is a Goodyear Supercar 3R in 285/35/20 on the front of a Mag Ride 2016 SS on a 23mm offset MRR M017 WITH a 12mm spacer. (Effective offset of 11mm) They would clear with less spacer but this was a test fit to run these on the track so I used my big spacer for more clearance.

[shaneotool]

I'm planning on going with 275/35 and 315/30 on my Mrr M017 wheels.
Very close in diameter to the stock SS diameters, and verified by a few as to not rub.

[Skyman2112]

Originally Posted by TheRealJA105

This is a Goodyear Supercar 3R in 285/35/20 on the front of a Mag Ride 2016 SS on a 23mm offset MRR M017 WITH a 12mm spacer. (Effective offset of 11mm) They would clear with less spacer but this was a test fit to run these on the track so I used my big spacer for more clearance.

so basically no way without spacers. THanks

[Skyman2112]

Originally Posted by shaneotool

I'm planning on going with 275/35 and 315/30 on my Mrr M017 wheels.
Very close in diameter to the stock SS diameters, and verified by a few as to not rub.

yeah i think 285s wont fit. Gonna do 275s instead.

[Skyman2112]

Originally Posted by warren3537

I had them on my 17 1SS and with a 3mm spacer then it puts them out to 20mm and no rubbing, things were real close but no rubbing, I hope this helps.

what wheel were you using?