03-08-2021, 12:44 PM | #1 |
Drives: 2019 Chevy Camaro ZL1 M6 Join Date: Jul 2019
Location: Sea level
Posts: 1,252
|
Question for 2” Kooks headers and green cats - AWE
I have a full AWE system after the primary cats,.. link pipes, resonated mid pipes and Touring catback. Will the Kooks headers and green cats bolt up to the AWE kit or will it require welding, fabbing, exhaust shop work?
__________________
Kong Stage X Port, NW103, LPE HPFP, XDI +30 Injectors, ARH Headers, Flex Fuel, JMS Booster, AWE Touring, Elite E2-X CC. Stock heads, stock cam, stock pulleys: Tuned by KingLT1. 740whp Uncorrected on e50
|
03-08-2021, 12:56 PM | #2 |
Drives: 2019 Chevy Camaro ZL1 M6 Join Date: Jul 2019
Location: Sea level
Posts: 1,252
|
I’m thinking it should be close to aligning if the link pipes are left off with the headers.
__________________
Kong Stage X Port, NW103, LPE HPFP, XDI +30 Injectors, ARH Headers, Flex Fuel, JMS Booster, AWE Touring, Elite E2-X CC. Stock heads, stock cam, stock pulleys: Tuned by KingLT1. 740whp Uncorrected on e50
|
03-08-2021, 01:43 PM | #3 |
Drives: 2018 ZL1 Coupe NFG M6 Join Date: May 2017
Location: Nolensville, TN
Posts: 618
|
Exhaust shop will be needed.
__________________
1989 Forumla 350 WS6 <- High School
2000 Trans Am Firehawk <- After High School 2017 Colorado Z71 <- Daily 2018 ZL1 M6 <- Not Daily |
03-08-2021, 02:39 PM | #4 |
Drives: 2019 ZL-1, Shadow Gray, Sold Join Date: Jan 2019
Location: Fredericksburg, VA
Posts: 1,390
|
There will be some fabrication required. Even with the link pipes, they will not line up. Unfortunately as per AWE rep, there is no header out there that lines up with their systems.
|
03-08-2021, 07:50 PM | #5 |
Drives: R.I.P. 2021 ZL1 & 2019 Rd Garn 2SS Join Date: Dec 2019
Location: Chattanooga, TN
Posts: 268
|
|
03-08-2021, 08:17 PM | #6 |
Drives: 2021 Red Hot ZL1 Join Date: Sep 2020
Location: Gapplebees
Posts: 3,080
|
If its cut right, no additional pipe should be needed. I had a full AWE catback exhaust before I took my car to Vengeance Racing to have the Kooks 2" headers and green cats installed, they didn't have to add any pipe.
|
03-08-2021, 08:24 PM | #7 |
Drives: 2019 Chevy Camaro ZL1 M6 Join Date: Jul 2019
Location: Sea level
Posts: 1,252
|
Nice. This is the info I’m looking for. Appreciate it.
__________________
Kong Stage X Port, NW103, LPE HPFP, XDI +30 Injectors, ARH Headers, Flex Fuel, JMS Booster, AWE Touring, Elite E2-X CC. Stock heads, stock cam, stock pulleys: Tuned by KingLT1. 740whp Uncorrected on e50
|
03-08-2021, 08:33 PM | #8 |
Drives: 2021 Red Hot ZL1 Join Date: Sep 2020
Location: Gapplebees
Posts: 3,080
|
I will say this though, my tips use to stick out a little further than they do now, VR had to pull the exhaust forward some to make them fit the cat pipes, but it honestly looks better now, the tips don't stick out quite as far and are tucked flush with the rear fascia.
|
|
|
Post Reply
|
|
|