09-05-2011, 06:28 PM | #1 |
Drives: 10 SIM 2SS/RS LS3 Join Date: May 2008
Location: Winston-Salem, NC
Posts: 1,940
|
Largest width tires available to fit on stock 8" and 9" width wheels?
I was looking to go 275 mm in the front and 315 mm in the back on the stock 20" wheels on the Camaro SS. But from what I'm seeing, this doesn't seem like it's possible without upgrading to a larger width wheel, maybe 9" and 10", respectively.
Seen some great competition Nitto tires that I'd really like to have using my stock wheels, but don't believe I can get the width I'm looking for. So question is, what are the widest tires I can fit on my stock 20" wheels? (front and back). thanks!
__________________
5th Gen Camaros of the Carolinas SIM, 2SS/RS LS3 5/7/11 453.9 RWHP 427.5 RWTQ
VMS Stage 2.5 Comp Cams kit, Cold Air Inductions intake, ADM race scoop, DT 1 3/4" headers, Solo cats, 3" Magnaflow catback, Pypes cutouts, HP tune, H&R SuperSport springs, Eibach sways/spacers, TexasSpeed UD pulley, LSR tensioner pulley, Barton shifter, skip shift eliminator, powder-coated calipers, R1 concept rotors, StopTech pads, Granatelli wires, Lloyds mats, tint, AAC afterburner taillamps, AAC scanner/sidemarkers, SRP pedals, custom engine cover, black bowties, Ridergraphix hood spears.... Last edited by topgun1; 09-05-2011 at 08:37 PM. |
09-06-2011, 09:42 AM | #2 |
1,425 hp / supercharged
Drives: (2010 2SS/L99) (1999 Corvette) Join Date: Oct 2009
Location: Austin, TX
Posts: 1,104
|
The maximum recommended widths would be 255 up front and 285 in the back. You can mount wider tires on the rims, but the sidewall bulge will adversely affect the contact patch and could compromise the structural integrity of the sidewall, itself.
__________________
"If it's too loud...well, you know the rest."
|
09-06-2011, 09:45 AM | #3 |
Account Suspended
Drives: 89 IROC 350 Join Date: Mar 2009
Location: Back roads, southern Ohio
Posts: 12,504
|
Don't squeeze a wider tire than recommended on the stock wheel. It's asking for trouble.
|
09-07-2011, 07:01 PM | #4 |
Drives: 10 SIM 2SS/RS LS3 Join Date: May 2008
Location: Winston-Salem, NC
Posts: 1,940
|
this is good advice. thanks alot. looks like i'm going to need to upgrade to wider wheels to get the tires I'm looking for.
__________________
5th Gen Camaros of the Carolinas SIM, 2SS/RS LS3 5/7/11 453.9 RWHP 427.5 RWTQ
VMS Stage 2.5 Comp Cams kit, Cold Air Inductions intake, ADM race scoop, DT 1 3/4" headers, Solo cats, 3" Magnaflow catback, Pypes cutouts, HP tune, H&R SuperSport springs, Eibach sways/spacers, TexasSpeed UD pulley, LSR tensioner pulley, Barton shifter, skip shift eliminator, powder-coated calipers, R1 concept rotors, StopTech pads, Granatelli wires, Lloyds mats, tint, AAC afterburner taillamps, AAC scanner/sidemarkers, SRP pedals, custom engine cover, black bowties, Ridergraphix hood spears.... |
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
SLP Black Painted Wheels With Machined Face 20" x 8" / 20" x 9" | tbyrne | Wheels / Tires | 9 | 01-18-2010 11:41 AM |